Raul Mata

• Installed electrical systems in residential and commercial buildings, enhancing safety and compliance with regulations.
• Maintained and repaired electrical equipment, ensuring optimal safety and functionality for users.
• Collaborated with contractors to ensure timely completion of projects, contributing to overall project success.

Performed electrical installations in commercial settings, ensuring compliance with safety standards.

• Interpreted blueprints to determine layout of electrical systems in structures.
• Advised management on issues of safety in continued equipment operation.
• Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
• Addressed and resolved worksite safety hazards to reduce risk.
• Fabricated parts according to specifications using hand and power tools.
• Installed leads and connected cables to motors, apparatus and equipment.
• Planned layout and installation of wiring and fixtures based on project specifications and building codes.
• Trained workers to install, maintain and repair electrical equipment and fixtures.
• Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
• Dismantled electrical components using hand tools to disconnect and restore wiring connections.
• Pulled insulated wires or cables through conduits to complete circuits.
• Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
• Calibrated instruments to ensure accuracy of readings.
• Troubleshot EMCS and variable frequency drive systems to correct and rectify issues.
• Provided technical support on various types of motor control circuits including VFDs.
• Prepared sketches showing location of wiring and equipment or followed diagrams during installation process.
• Assisted with the layout of large scale industrial plant projects.
• Maintained current electrician's license or identification card to meet governmental regulations.
• Contributed to various projects, providing value to department, company and client base.
• Reviewed and assessed electrical, mechanical and architectural diagrams and specifications to accurately complete projects.
• Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.
• Developed preventive maintenance programs for lighting systems, motors and controls.
• Diagnosed malfunctioning systems using schematics diagrams and test instruments such as digital multimeters.
• Oversaw project details and adhered to diagnosis, wiring and OSHA regulations.
• Worked on high voltage switchgear projects involving transformer hookups and terminations up to 15 kV level.
• Developed accurate estimates and proposals to perform electrical installations and troubleshooting.
• Tested entire electrical assembly for performance levels and safety concerns.
• Installed grounding system per NEC code requirements.
• Interpreted schematics, blueprints and diagrams to complete projects on time.
• Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
• Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
• Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
• Repaired or replaced worn or defective parts using hand tools and power tools.
• Installed conduit, wire and motor controls.
• Connected wires to circuit breakers, transformers, or other components.
• Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
• Ensured compliance with local and national electrical codes during installations.

• Constructed and installed framing for residential and commercial buildings.
• Interpreted blueprints and specifications for accurate project execution.
• Collaborated with subcontractors to ensure project timelines and quality standards.
• Operated hand tools, power tools, and heavy equipment safely and efficiently.
• Inspected materials for defects before framing installation to maintain quality control.
• Maintained a clean and organized worksite to promote safety and productivity.
• Evaluated structural integrity of frameworks during construction phases to ensure compliance.
• Laid out floor joists in accordance with approved plans.
• Measured and cut lumber to required size for framing walls, floors, and roofs.
• Installed drywall or wallboard onto studs of framed walls.
• Attached sheathing materials to exterior walls of buildings with nails or screws.
• Connected headers over windows and doorways in order to provide support for the structure's load bearing capacity.
• Erected rafters, studs, and other structural components.
• Fabricated trusses from engineered drawings and specifications.
• Repaired damaged structures using appropriate methods such as hammering, sawing, drilling.
• Installed window and door frames into interior walls.
• Built scaffolding for access to higher elevations on the job site.
• Ensured that all safety regulations were adhered to while working at height.
• Constructed formwork for concrete foundations using timber boards.
• Assembled staircases according to code requirements.
• Checked accuracy of measurements against blueprints before cutting materials accordingly.
• Inspected finished work for quality assurance purposes before signing off each stage of construction.
• Fitted, cut and installed wood trim.
• Fastened sub-flooring panels securely in place before installing floor coverings such as carpets or vinyl tiles.
• Applied weatherproofing treatments to exposed wood surfaces prior to painting or staining.
• Installed doors, frames and wood components following manufacturers' instructions.
• Positioned and held timbers, lumber, or paneling in place for fastening or cutting.
• Applied caulk, sealants and other agents to installed surfaces.
• Checked wood and other materials to assess for damaged or defective items before starting projects to accurately determine projects scales and quotes.
• Assessed project specifications to identify required tools and equipment.
• Completed tear-down of existing construction to prepare for new construction.
• Fastened timbers or lumber with glue, screws or pegs.
• Installed windows, flooring, or trim using hand or power tools.
• Fashioned frameworks or props using hand tools and wood screws, nails or glue.
• Consistently constructed square and level projects.
• Mixed mortar, plaster, and grout according to standard formulas.
• Selected tools, equipment and materials from storage to transport to work site.
• Analyzed problematic installations and implemented appropriate solutions for quick remediation.
• Examined construction plans to identify potential structural problems.
• Completed tear-down of existing structures to prepare for new construction.
• Worked independently on projects and tasks within carpentry team.
• Removed damaged or defective parts or sections of structures and repaired or replaced using hand tools.
• Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
• Verified trueness of construction using plumb and level.
• Anchored and braced forms and other structures in place using nails, bolts, anchor rods, steel cables, planks, wedges and timbers.
• Covered subfloors with building paper and laid hardwood or parquet floors by nailing to subfloor or cementing to mastic base.
• Coordinated with subcontractors to work specialty areas, heating or electrical wiring work.
• Erected scaffolding to assemble above-ground structures.
• Inspected tiles, wall coverings or woodwork for breakage or damage.
• Bore boltholes in wood, masonry or concrete using electric or pneumatic drill.
• Roughed in door and window frames or subflooring in structures undergoing construction or repair.
• Utilized various tools, equipment, materials and forming systems to complete construction tasks.
• Maintained clean and organized workplace to optimize performance, efficiency and safety.
• Fitted insulation between studs of framed walls prior to covering them with drywall sheets.
• Provided assistance to other tradespeople when needed during the building process.
• Maintained tools and supplies in good condition throughout the project duration.
• Applied joint compound and tape to seams for smooth finishes.
• Installed drywall panels on walls and ceilings using screws, nails, or adhesives.
• Measured and cut drywall sheets to fit into wall frames.
• Checked for accuracy in measurements before installing the drywall material.
• Completed drywall finish work with exceptional quality and efficiency.
• Followed safety protocols while working with hazardous materials like fiberglass insulation.
• Repaired damaged drywall sections due to water leakage or other causes.
• Lifted heavy objects such as ladders and tools during installation activities without assistance from others.
• Used power tools such as drills, saws to cut holes in walls for electrical wiring or plumbing lines.
• Finished surfaces by sanding, spackling, texturing, and painting them.
• Prepared walls for paint, texture or wall covering.
• Performed minor carpentry tasks related to installation of drywalls such as framing doors and windows.
• Inspected completed work for defects such as cracks, unevenness, dents.
• Attached metal corner beads at corners of walls prior to applying plaster mix.
• Aligned tiles and ceiling grid using spacers.
• Followed requirements for installing clips and blackout cuts.
• Applied weather-resistant barriers to protect structures from moisture.
• Ensured proper alignment and secure attachment of siding panels.
• Operated power tools and equipment for cutting and shaping materials.
• Dug ditches or trenches, backfilled excavations or compacted and leveled earth to grade specifications.
• Positioned, aligned or sealed concrete wall sections or pipes.
• Installed sewer, water or storm drain pipes using pipe-laying machinery or laser guidance equipment.
• Operated equipment with strong focus on safety and ground communication.
• Performed demanding physical work over extended periods and modeled positive attitude.
• Assisted in roof installation and repair using hand and power tools.
• Cleared debris and prepared work areas for roofing tasks.
• Operated equipment such as ladders, scaffolding, and hoisting devices safely.
• Repaired existing roofs by replacing damaged or worn shingles, shakes or tiles.
• Worked with supervisor and foreman to ensure that work was performed correctly within time constraints.
• Used ladders properly when accessing rooftops for repairs or installations.
• Operated power tools such as drills and saws safely according to manufacturer's instructions.
• Completed residential and commercial roofing work on time and within expected project parameters, increasing repeat business opportunities.
• Maintained records including daily logs detailing number of hours worked per day and materials used during installation process.
• Overlapped successive layers of roofing material, determining distance of overlap using chalk line, gauge on shingling hatchet and lines on shingles.

• Supported electricians in installing and maintaining electrical systems to ensure operational efficiency.

Facilitated residential electrical installations, focusing on roughs and trims

• Followed safety protocols to maintain a secure work environment on job sites.
• Collaborated with team members to troubleshoot electrical issues and implement solutions.
• Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
• Planned layout and installation of wiring and fixtures based on project specifications and building codes.
• Fabricated parts according to specifications using hand and power tools.
• Installed leads and connected cables to motors, apparatus and equipment.
• Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
• Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
• Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
• Reviewed blueprints to determine electrical component and wiring locations.
• Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
• Pulled insulated wires or cables through conduits to complete circuits.
• Performed preventive maintenance procedures on electrical systems.
• Inspected transformers and circuit breakers to identify any potential issues before they become major problems.
• Maintained accurate documentation of all work performed.
• Set up equipment and configured settings for optimal performance.
• Built controllers and panels to complete system installations.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Followed relevant electrical and building codes for each job.
• Connected cables from service entrance to meters and main distribution panel boards.
• Transported required supplies and employees from headquarters to job site using company vehicles.
• Assisted in the planning of new installations by studying customer requirements and following approved specifications.
• Identified problems with circuits or equipment using testing devices such as multimeters or oscilloscopes.
• Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
• Resolved issues with existing systems and replaced malfunctioning parts.
• Measured and prepared supplies for electrical tasks.
• Inspected existing wiring to identify short circuits.
• Installed ground fault circuit interrupter outlets per code requirements.
• Read and interpreted blueprints, schematics, diagrams, and technical documents for installation of new systems.
• Assembled junction boxes according to code requirements.
• Ran cable trays for power distribution from main panels to branch circuits.
• Dug trenches and created holes to pull conduit and install supports.
• Cut openings in walls or floors to accommodate the passage of pipes or electrical conduit using power saws or cutting torches.
• Installed and maintained electrical wiring, equipment, and fixtures in accordance with local codes and regulations.
• Installed new electrical components, fixtures, and motors.
• Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
• Reviewed blueprints and electrical schematics to perform tasks to specifications.
• Kept work areas clean, neat, and free of hazards.
• Completed semi-skilled and skilled work under supervision of fully qualified professionals.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Adhered to company standards and OSHA regulations for work site safety.
• Maintained organization, cleanliness, and safety in work areas.
• Installed conduit systems including EMT, rigid conduit, flexible conduit.
• Tested electrical systems to ensure proper functioning and safety.
• Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
• Worked with a variety of materials including PVC conduits, copper wiring, aluminum wiring and MC cables.
• Worked in team-based environment to accomplish projects.
• Replaced malfunctioning electrical components, including circuit breakers, fuses, and switches.
• Pulled wires through conduit runs using fish tapes or pull strings when necessary.
• Used hand tools such as wire strippers, cutters to prepare wires for connections to boxes, terminals.
• Supported project documentation efforts by logging daily activities and materials used.
• Maintained a clean and safe work environment to promote efficiency and safety.
• Conducted basic tests on electrical circuits to ensure proper functionality.
• Observed experienced electricians to learn advanced techniques and best practices.
• Organized tools and materials for efficient workflow during projects.
• Collaborated with team members to troubleshoot electrical issues effectively.
• Assisted electricians with installation and maintenance of electrical systems.

• Operated forklifts to transport materials within the facility.
• Loaded and unloaded shipments efficiently for production needs.
• Inspected incoming materials for quality and compliance standards.
• Maintained accurate inventory records using warehouse management systems.
• Collaborated with team members to optimize material flow processes.
• Followed safety protocols to ensure a secure working environment.
• Trained new employees on proper material handling techniques.
• Ensured a clean work area to promote safety and efficiency by following company guidelines for organization.
• Inspected materials for any damages or defects upon receipt.
• Received and distributed incoming materials to designated areas.
• Packed merchandise into boxes and containers in preparation for safe shipment.
• Reported any malfunctions or damages of material handling equipment promptly.
• Supported other warehouse personnel in completing tasks efficiently.
• Loaded completed orders on pallets according to delivery numbers.
• Utilized forklift to move inventory items.
• Loaded and unloaded trucks with appropriate material handling equipment.
• Organized warehouse inventory according to warehouse plan.
• Performed regular cycle counts to ensure accuracy of inventory records.
• Participated in physical inventories by counting parts accurately as needed by counting parts accurately and quickly.
• Maintained accurate inventory records of all received items.
• Collaborated with supervisors to develop efficient methods for storing goods.
• Palletized boxes to increase movement and shipment efficiency.
• Adhered strictly to company policies concerning the use of protective gear while on duty.
• Protected company inventory by maintaining and organizing storage areas.
• Managed warehouse receiving, storing and shipping.
• Disposed of debris and hazardous materials properly to avoid contamination.
• Checked incoming deliveries for quality and quantity to promptly identify damage or issues pertaining to orders.
• Recorded parcel movement with hand-held scanners to maintain precise inventory logs using hand-held scanners and daily production sheets to keep records accurate.
• Tracked shipment information using computerized systems such as SAP or Oracle software applications.
• Sorted cargo for accurate shipment to target locations, preventing unnecessary delays, and promoting productivity.
• Transported hazardous materials safely according to established protocols.
• Coordinated incoming and outgoing shipments and placement of materials to meet scheduling requirements.
• Worked with internal departments to locate missing packages and remedy incorrect deliveries.
• Investigated discrepancies between inventory records and actual stock on hand.
• Updated job knowledge by participating in educational opportunities such as seminars or trainings.
• Identified opportunities for process improvement in order to increase efficiency.
• Operated forklifts, pallet jacks, and other material handling equipment.
• Counted number of boxes or units in loading docks to confirm proper completion of work orders.
• Placed bins, carts and containers in convenient locations to assist with loading efficiency.
• Applied identification tags on containers to facilitate inventory management on containers, boxes and cargo.
• Reviewed work orders before starting work to determine necessary materials and meet deadlines.
• Protected items by wrapping in cling film, padded moving blankets and tape.
• Secured items in truck by strapping over protective padding.
• Followed organizational procedures to stack and store cargo in transit sheds, ship holds and warehouses.
• Placed bracing, straps and other protective devices onto items in transit to prevent damage.
• Verified cargo against regulations before transportation to ensure safety and determined if items adhered to proper regulation standards.
• Carried necessary tools and supplies to transportation vehicles and returned to proper storage areas after use.
• Directed items according to established routing schemes using computer-controlled keyboards and scanning equipment to assist mail-sorting processes.

• Assisted skilled technicians in routine mechanical maintenance tasks.
• Operated basic tools and equipment under supervision for various projects.
• Participated in training sessions to learn new techniques and processes.
• Followed safety protocols to minimize risks during operations and repairs.
• Supported inventory management by tracking supplies and materials used.
• Collaborated with team members on assembly tasks for mechanical components.
• Worked closely with mentors to understand project objectives.
• Completed semi-skilled and skilled work under supervision of fully qualified professionals.
• Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
• Embraced ongoing education and learning opportunities to develop new skills.
• Developed and maintained effective working relationships with other apprentices, colleagues, customers and suppliers.
• Used strong verbal and written communication skills to convey messages to others.
• Assisted in the preparation of project plans and schedules.
• Shadowed craft experts and supervisors to learn wide range of simple and complex techniques.
• Supported operators by providing assistance with equipment adjustments and material handling. align, move and adjust equipment and materials.
• Utilised problem solving skills to identify and resolve issues relating to apprenticeship programs.
• Maintained accurate records of all apprentice activities including training sessions, assessments and evaluations.
• Performed routine tasks such as measuring, cutting, and assembling materials.
• Assisted master craftsmen with daily tasks to learn trade skills.
• Assisted in planning and executing projects under supervision.
• Learned and applied industry-specific software and tools for project management.
• Conducted basic maintenance and troubleshooting of machinery under guidance.
• Demonstrated initiative by seeking out additional responsibilities and learning opportunities.
• Monitored inventory levels and assisted with ordering supplies.
• Helped in setting up job sites, including equipment and material layout.
• Observed and documented project progress for learning purposes.
• Maintained tools and equipment, ensuring they were in good working order.
• Prepared construction sites, materials and tools for specific projects and loaded and unloaded equipment and products.
• Performed demolitions, installed remodeling products according to company standards and procedures and learned finishing work for installations and remodels.
• Assisted tradesmen and machine operators in construction projects.
• Read and interpreted construction blueprints for various projects.
• Transported construction materials by hand or using various methods to ensure timely project progress. by hand or various transport methods.
• Followed company and governmental health and safety regulations and trained new team members.
• Completed job checklists with customers and answered questions and solved problems before closing projects.
• Removed debris, garbage and dangerous materials from sites and assembled and broke down ladder equipment.
• Signaled and guided heavy equipment operators and secured special attachments to construction machines.
• Directed and controlled traffic flow around diverse construction areas, resulting in peak safety and productivity.
• Put together and took apart scaffolding and other temporary structures.