Rene Diaz De Leon
El Paso,TX
Summary
Driven Apprentice Electrician offering 6+ years of experience. Demonstrated understanding of electrical codes and construction best practices. Flexible approach to problems. Resourceful electrician bringing excellent communication and teamwork illustrated over 4+ years of industry experience. Ambitious and eager to learn with superior work ethic. Hardworking Electrician driven to complete projects with focus on safety, cost-efficiency and client satisfaction. Versed in residential and commercial installations and repairs. Years of industry expertise, including building codes, blueprint assessments and new construction protocols. Proficient Journeyman Electrician adept at mentoring junior electrical workers and training on correct safety procedures, building codes and finishing strategies. Motivational leader solves routine and complex problems with resourceful and experienced approach.
Overview
12
12
years of professional experience
Work History
Journeyman Electrician
Matador I&E
San Angelo, TX
10.2022 - Current
- Ensured all safety procedures were followed while working with live wires.
- Replaced faulty switches, outlets, circuit breakers when necessary.
- Assisted journeyman electricians in troubleshooting complex problems.
- Connected wires to circuit breakers, transformers or other components to form circuits.
- Read blueprints or schematic diagrams to determine the layout of a particular job site.
- Instructed apprentices on proper installation techniques for various electrical components.
- Inspected completed installations for conformance to codes and regulations.
- Performed maintenance on existing electrical wiring and equipment.
- Traced and diagnosed electrical malfunctions using hand tools and test equipment.
- Built controllers and panels to complete system installations.
- Dug trenches and created holes to pull conduit and install supports.
- Installed motor feeders and made standard motor connections.
- Verified measurements and made accurate cuts to avoid wasting materials on job sites.
- Led team of apprentice electricians in installing electrical systems and inspecting existing circuits.
- Performed rough-in, termination, and underground work.
- Kept work areas clean, neat and free of hazards.
- Addressed and resolved worksite safety hazards to reduce risk.
Electrician
wescom inc
Carlsbad, NM
04.2022 - 10.2022
- Provided technical support on various types of motor control circuits including VFDs.
- Repaired or replaced worn or defective parts using hand tools and power tools.
- Identified problems with electrical systems by observing operation, listening for problems and using test equipment such as multi-meters.
- Worked on high voltage switchgear projects involving transformer hookups and terminations up to 15kv level.
- Constructed control panels from blueprints or schematic drawings.
- Ensured that all work was completed in accordance with applicable codes.
- Installed grounding system per NEC code requirements.
- Conducted troubleshooting operations on complex industrial machinery requiring advanced knowledge of electricity.
- Installed conduit, wire and motor controls.
- Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
Electrician
Native Energy Solutions
Hobbs, NM
08.2021 - 11.2021
- Installed conduit, wire and motor controls.
- Connected wires to circuit breakers and transformers.
- Traced and diagnosed electrical malfunctions using hand tools and test equipment.
- Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
- Worked extensively on three-phase, 277/480 volt power distribution systems.
- Worked in team-based environment to accomplish projects.
- Put in new new electrical components, fixtures and motors.
- Worked closely with team members to deliver project requirements, develop solutions and meet deadlines.
- Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
- Kept work areas clean, neat and free of hazards.
- Verified measurements and made accurate cuts to avoid wasting materials on job sites.
- Built controllers and panels to complete system installations.
- Transported required supplies and employees from headquarters to job site using company vehicles..
- Termination in panels, motors,and PLC's
- Completed semi-skilled and skilled work under supervision of fully qualified supervisors.
- Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
- Followed electrical code manuals to install and repair electrical systems.
- Performed rough-in, termination and underground work.
- Corrected issues and installed new fixtures, wiring, circuits and motors.
- Dug trenches and created holes to pull conduit and install supports.
Apprentice Lineman
power house elctrical
Andrews, TX
05.2021 - 08.2021
- Operated overhead line equipment such as bucket and boom trucks with consistent safety.
- Maintained tools, equipment and vehicles in line with strict company standards.
- Helped operate digger derrick truck and dug rock holes.
- Assisted with emergency call-outs to quickly restore service.
- Handled repair work for overhead and underground electrical power lines.
- Assessed job sites for cleanliness and organization and loaded trucks with materials at completion of shift.
- Performed pre-installation procedures to attach cross-arms, insulators and auxiliary equipment to poles.
- Worked with team to install cables, poles and transformers.
- Maintained electric work tools and equipment.
Electrician's Apprentice
Great Basin Industrial
Carlsbad, NM
05.2018 - 03.2021
- Installed conduit, wire and motor controls.
- Connected wires to circuit breakers and transformers.
- Traced and diagnosed electrical malfunctions using hand tools and test equipment.
- Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
- Worked extensively on three-phase, 277/480 volt power distribution systems.
- Worked in team-based environment to accomplish projects.
- Put in new new electrical components, fixtures and motors.
- Worked closely with team members to deliver project requirements, develop solutions and meet deadlines.
- Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
- Kept work areas clean, neat and free of hazards.
- Verified measurements and made accurate cuts to avoid wasting materials on job sites.
- Built controllers and panels to complete system installations.
- Transported required supplies and employees from headquarters to job site using company vehicles..
- Termination in panels, motors,and PLC's
- Completed semi-skilled and skilled work under supervision of fully qualified supervisors.
- Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
- Followed electrical code manuals to install and repair electrical systems.
- Performed rough-in, termination and underground work.
- Corrected issues and installed new fixtures, wiring, circuits and motors.
- Dug trenches and created holes to pull conduit and install supports.
Electrical Apprentice
Varco Electric
Carlsbad, NM
02.2018 - 05.2018
- Kept work areas clean, neat and free of hazards.
- Maintained organization, cleanliness and safety in work areas.
- Dug trenches and created holes to pull conduit and install supports.
- Completed semi-skilled and skilled work under supervision of fully qualified supervisors.
- Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
- Worked in team-based environment to accomplish projects.
- Measured and prepared supplies for electrical tasks.
- Followed all relevant electrical and building codes for each job.
- Kept work areas clean, neat and organized for efficient operations.
Journeyman Carpenter
De Leon construction
El Paso, TX
01.2013 - 01.2018
- Used band, circular, jig, reciprocating, chop and compound miter saws.
- Shaped materials to exact measurements for job requirements with hand tools and power equipment.
- Cut timber, panels and other wooden materials according to measured dimensions.
- Promoted team safety by keeping work areas free of hazards.
- Installed floor joists, trusses and rafters.
- Installed building windows, trim and cabinetry alone or with assistants to meet job deadlines.
- Framed new construction of single-family homes and townhomes.
- Installed cabinets, base cabinets and crown molding.
- Planned work based on blueprints and individual project specifications.
- Examined buildings and project specifications to determine measurements and dimensions.
- Anchored and braced forms and other structures in place to complete precise joining and high-quality work.
- Operated terrain telescoping forklift, backhoe, skid steer and tractor.
- Repaired and replaced roof membrane, sub roofing, sheathing and base materials.
- Cut roofing paper to size and nailed and stapled paper to roof in overlapping strips to form base for roofing materials.
- Repaired and maintained surface materials to make building exteriors weatherproof and waterproof.
- Maintained knowledge of single ply and built-up service and repair.
- Planned, organized and oversaw daily activities of multiple production crews.
- Punched holes in slate, tile, terra cotta and wooden shingles, using punch and hammer.
Education
GED -
Socorro High School
El Paso, TX05.2006
Skills
- Technical Drawings and Documentation
- National Electric Code
- Circuit Testing
- Blueprints and Schematics
- Test Equipment
- Heavy Lifting
- Problem-Solving
- Verbal and Written Communication
- Conduit and Raceway Installation
- Undergrounding Power Lines
- Power Distribution
- Willingness to Learn
- System Troubleshooting
- Attention to Detail
- Conduit and Pipe Laying
- Transformer Connection
- Hand and Power Tool Operation
- Electrical Safety
- Local Codes Compliance
- Scaffolding and Ladder Work
- Layout Planning
- Grounding Installation
- Lock Out-Tag Out Procedures
- Electrical Systems Testing
- Fluent in Spanish
- Friendly, Positive Attitude
- Reliable and Trustworthy
- People Skills
- Maintenance & Repair
- Work Ethic
- Terminating Cables
- Installing Equipment
- Solar Roofing Systems
Languages
English
Native/ Bilingual
Timeline
Journeyman Electrician
Matador I&E
10.2022 - Current
Electrician
wescom inc
04.2022 - 10.2022
Electrician
Native Energy Solutions
08.2021 - 11.2021
Apprentice Lineman
power house elctrical
05.2021 - 08.2021
Electrician's Apprentice
Great Basin Industrial
05.2018 - 03.2021
Electrical Apprentice
Varco Electric
02.2018 - 05.2018
Journeyman Carpenter
De Leon construction
01.2013 - 01.2018
GED -
Socorro High School
Similar Profiles
Abigail PelsorAbigail Pelsor
Sales Associate at The MatadorSales Associate at The Matador
Diego MarvalDiego Marval
Bartender at Club MatadorBartender at Club Matador
Caleb ChalifouxCaleb Chalifoux
Line Cook at Matador Pizza and SteakhouseLine Cook at Matador Pizza and Steakhouse