Jae R. Espinoza

From floor to roof...

-Pluming-

• Performed daily tasks with attention to detail and effectiveness.
• Completed day-to-day duties accurately and efficiently.
• Contributed innovative ideas and solutions to enhance team performance and outcomes.
• Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
• Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
• Exceeded customer satisfaction by finding creative solutions to problems.
• Recognized by management for providing exceptional customer service.
• Inspected existing electrical infrastructure for faults or defects.
• Performed preventive maintenance on electrical systems and components.
• Troubleshot electrical issues using appropriate testing devices.
• Installed repairs and replaced electrical wiring.
• Installed electrical wiring and conduit for new construction projects.
• Assembled electrical cabinets using nuts bolts screws washers .
• Installed electrical wiring and fixtures.
• Conducted preventative maintenance on existing electrical systems as scheduled.
• Diagnosed electrical faults using specialized testing tools and instruments.
• Installed electrical wiring for stage lighting systems.
• Inspected electrical wiring for compliance with local building codes.
• Performed general electrical maintenance.
• Operated hand tools and power equipment for roof repairs and installations.

-Roofing-

• Assisted in installing roofing materials on residential and commercial buildings.
• Followed safety protocols to maintain a secure work environment on job sites.
• Collaborated with team members to complete roofing projects efficiently and effectively.
• Repaired existing roofs by replacing damaged or worn shingles, shakes or tiles.
• Followed all OSHA safety regulations related to roofing activities.
• Used ladders properly when accessing rooftops for repairs or installations.
• Unloaded materials to roof by repetitive lifting or through conveyor operations.
• Operated power tools such as drills and saws safely according to manufacturer's instructions.
• Communicated effectively with colleagues regarding progress of work being done onsite.
• Installed flashing around chimneys, vents, and skylights according to specifications.
• Worked regularly at advanced heights and followed all OSHA safety protocols and procedures for fall prevention.
• Completed residential and commercial roofing work on time and within expected project parameters, increasing repeat business opportunities.
• Assisted skilled workers in performing more complex tasks such as installing sheet metal flashings.
• Performed skilled and semi-skilled repairs to existing roofs, including shingle replacement.
• Performed minor maintenance tasks on tools used in roofing operations such as cleaning, lubricating, and tightening components.
• Sealed seams with asphalt-saturated felt strips or cement mastic for protection against moisture.
• Demonstrated excellent customer service skills when interacting with clients.
• Cut roofing paper to size and nailed and stapled paper to roof in overlapping strips to form base for roofing materials.
• Followed manufacturer specifications to remove old roofing materials and install new roofs.
• Maintained and repaired roofing tools and equipment.
• Diagnosed and identified sources of leaks, developing plans for repairs from total tear-offs to patchwork.
• Applied plastic coatings and membranes, fiberglass or felt over sloped roofs to prepare for shingle installation.
• Cemented and nailed flashing strips of over joints to achieve watertight seals.
• Covered roofs and exterior walls of structures with slate, asphalt, and aluminum with brushes and knives.
• Overlapped successive layers of roofing material, determining distance of overlap using chalk line, gauge on shingling hatchet and lines on shingles.
• Demonstrated best safety practices working at heights and lifting various objects.
• Operated equipment with strong focus on safety and ground communication.
• Cleaned or prepared construction sites to eliminate hazards.
• Resolved labor, design and tool issues during construction projects.
• Kept production team moving forward for progress in daily site operations.
• Added vapor barriers or insulating materials on flat roofs.
• Created work crew schedules and delegated assignments.

-Carpenter-

• Installed cabinets, doors, and windows with precision and care.
• Operated power tools safely to cut, shape, and assemble materials.
• Conducted site measurements to guarantee accurate material sizing.
• Maintained a clean and organized work environment for safety compliance.
• Assisted in training apprentices on basic carpentry techniques and safety protocols.
• Resolved on-site issues by adapting plans to meet changing conditions.
• Used various carpenter's hand tools, portable power tools and standard measuring instruments.
• Performed various carpentry duties, including both rough and finish carpentry.
• Operated power tools safely when performing carpentry tasks such as drilling holes into lumber pieces.
• Installed drywall sheets onto walls or ceilings using nails or screws.
• Measured, cut and shaped wood materials to specifications using hand tools, such as saws and chisels.
• Installed interior trim work such as baseboards and moldings around windows and doors.
• Repaired or replaced damaged structures or components.
• Promoted team safety by keeping work areas free of hazards.
• Fabricated staircases, doors, window frames and other wooden components for buildings.
• Positioned and installed floor joists, trusses and rafters.
• Conducted inspections, diagnosed problems, took measurements and made necessary adjustments to complete projects according to specifications.
• Cut and installed tile and hardwood flooring for residential and commercial b
• I cut and installed tile and hardwood flooring for residential properties.
• Measured, cut, and installed staircase spindles.
• Utilized various tools, equipment, materials and forming systems to complete construction tasks.
• Worked independently on projects and tasks within carpentry team.
• Roughed in door and window frames or subflooring in structures undergoing construction or repair.
• Consistently constructed square and level projects.
• Erected scaffolding to assemble above-ground structures.
• Fashioned frameworks or props using hand tools and wood screws, nails or glue.
• Inspected tiles, wall coverings or woodwork for breakage or damage.

-Painting-

• Managed painting projects from start to finish, ensuring client satisfaction.
• Selected appropriate materials and tools for various painting tasks.
• Maintained inventory of paint supplies and equipment for ongoing projects.
• Inspected completed work to ensure high-quality standards were met consistently.
• Repaired drywall or plaster if needed before applying paint or wallpaper treatments.
• Inspected finished projects to ensure they met quality standards prior to client acceptance.
• Prepared surfaces for painting by removing old paint, filling holes and cracks, sanding, and cleaning.
• Selected appropriate tools and equipment such as brushes, rollers, spray guns, ladders, scaffolding, as required for each job.
• Prepared surfaces for painting by scraping, sanding, and priming as needed.
• Provided accurate estimates of labor costs, timeframes, and material requirements for projects.
• Instructed laborers on proper safety procedures when using hazardous materials or working in confined spaces.
• Coordinated with other contractors when necessary in order to complete projects efficiently.
• Conducted regular maintenance checks on tools and equipment used during jobs in order to keep them in good condition.
• Mixed paints and stains to desired colors and consistency according to job specifications.
• Primed, smoothed and cleaned trim, walls and ceilings to prepare for painting tasks.
• Painted walls and other surfaces using traditional and sprayer methods and worked efficiently to complete jobs within required timeframes.
• Chose correct brushes and materials for jobs and purchased from vendors.
• Identified surface to be covered and characteristics of finish to properly select roller, power sprayer and right size brush.
• Cleaned and properly stored paint equipment and supplies at end of each workday.
• Maintained thorough inventory of paint equipment and supplies by checking product levels.
• Sprayed prepared surfaces with specified amounts of primers and finish coatings.
• Cleaned and smoothed surfaces prior to painting.
• Mixed and applied paints, varnishes and sealants to promote lasting finish.
• Readied surfaces and surrounding areas for painting with sandpaper, tape and other materials.
• Smoothed surfaces using sandpaper, scrapers or sanding machines.
• Removed pictures, door knobs or electric switch covers prior to painting.
• Filled cracks, holes or joints using caulking guns or putty knives.
• Constructed scaffolding and supports to complete work above ground-level.
• Removed old finishes by stripping, sanding or using water or abrasive blasting.

-Flooring-

• Installed various types of flooring including hardwood, laminate, and tile.
• Prepared subfloors by cleaning, leveling, and repairing surfaces as needed.
• Utilized specialized tools like saws, trowels, and flooring nails for installations.
• Collaborated with clients to understand design preferences and flooring options.
• Ensured accurate measurements and cuts for seamless flooring transitions.
• Conducted inspections to confirm proper installation and alignment of floors.
• Installed carpet, tile, laminate, and hardwood flooring in residential and commercial settings.
• Demonstrated excellent problem-solving skills when unexpected issues arose during job sites.
• Measured and cut flooring materials to fit the dimensions of each room.
• Maintained clean work areas throughout project duration.
• Removed old flooring materials such as carpets or tiles when necessary.
• Prepared surfaces for installation by cleaning and leveling them.
• Communicated effectively with clients regarding progress updates and potential issues.
• Performed minor repairs to existing floors before installation process began.
• Created custom cuts for around pipes or other objects in the room.
• Reviewed blueprints and drawings to determine layout of floor planks or tiles accurately.
• Applied adhesives to subfloors prior to laying down new flooring material.
• Formed smooth flooring foundations by installing plywood or Masonite over support structures.
• Applied waterproofing compounds and filled cracks with materials such as plaster, putty or grouting.
• Retaining walls, wood.

• Inspected plumbing systems for leaks and malfunctions.
• Installed and repaired pipes, fixtures, and appliances.
• Diagnosed plumbing issues using specialized tools and techniques.
• Collaborated with customers to determine plumbing needs and preferences.
• Maintained accurate records of services performed for customer reference.
• Advised customers on proper maintenance of plumbing systems.
• Ensured compliance with local plumbing codes and regulations.
• Provided on-site training to junior plumbers on installation techniques.
• Installed, repaired, and replaced water heaters, faucets, toilets, pipes, and other fixtures.
• Responded to emergency service calls regarding plumbing issues.
• Inspected drainage systems for clogs or blockages.
• Maintained a clean work area throughout each job site visit.
• Explained repair procedures to customers in an easy-to-understand manner.
• Examined and diagnosed plumbing systems to identify problems and develop solutions.
• Performed preventative maintenance and repairs on plumbing systems.
• Adhered to safety protocols when working with hazardous materials such as natural gas.
• Replaced worn-out parts like washers and seals, as needed.
• Troubleshot water supply lines for leaks or breaks in pipe connections.
• Performed pipe fabrication, installation, and fitting according to proper specifications.
• Repaired gas lines that were leaking or malfunctioning.
• Ran tests on existing plumbing systems to determine their efficiency.
• Prepared cost estimates for plumbing projects based on customer needs.
• Consulted with engineers or contractors if necessary to complete more complex jobs.
• Constructed new piping systems from scratch using materials such as copper tubing or PVC piping.
• Identified and located required tools prior to starting each project.
• Cut and beveled piping using cutting torches, saws, and threading machines.
• Assisted team by inspecting pipes and piping systems to assess quality and condition.
• Tested plumbing systems to locate leaks, malfunctions and repair needs.
• Cut openings in walls and floors to accommodate pipe and pipe fittings.
• Cut and fit pipes to established measurements.
• Used power tools to create assemblies and sub-assemblies.
• Maintained tools and equipment to keep supplies in excellent working condition.
• Studied blueprints and inspected structures to assess material and equipment needs, pipe installation sequence and installation around possible obstructions.
• Installed and extended underground storm, sanitation, and water piping systems to connect fixtures and plumbing.
• Completed walk-throughs of completed systems to verify code adherence.
• Supervised staff and evaluated work performance.
• Shut off steam or other gases or liquids from pipes to conduct maintenance.
• Filled pipes with water or air, observing pressure gauges, and pipes to troubleshoot and locate leaks.
• Established sequence of installations around obstructions.
• Verified and gathered measurements to determine proper piping sizes.
• Inspected installed systems using hydrostatic testing or pressure gauges.
• Installed supports from ceiling joists to secure pipes in place.
• Inspected worksites to determine presence of obstructions, unsafe conditions, and crew errors.
• Installed automated controls to regulate pressure and volume in pipe systems.
• Welded piping using specialized techniques and computer-assisted fabrication.
• Inspect all types of sensors: urinals and toilets, American Standard, and Sloan, etc.
• Use a sewer line inspector with a camera to locate and find where the problem is.
• Run the hydro jetter to clear the 4" or any size sewer, and for a better view for the camera and maintenance.

• Led project planning and execution for landscape design initiatives.
• Coordinated with clients to gather requirements and preferences.
• Supervised team members during installation and maintenance of garden projects.
• Developed relationships with suppliers for materials and services procurement.
• Conducted site visits to assess project progress and quality standards.
• Implemented design changes based on client feedback and environmental considerations.
• Trained junior staff on project management tools and best practices.
• Managed multiple projects with competing deadlines simultaneously.
• Built and established strong partnerships with teams, vendors and contractors.
• Monitored progress of each project to ensure timely delivery of deliverables in accordance with established quality standards.
• Led meetings with internal team members, consultants and contractors.
• Provided guidance to team members regarding tasks assigned to them.
• Coordinated resources across multiple departments and teams as needed for successful completion of projects.
• Collaborated closely with senior management on long-term strategic planning initiatives related to projects in development or execution stages.
• Conducted periodic inspections of job sites for quality and progress.
• Identified risks associated with each project and developed strategies for mitigating those risks.
• Managed contracts with vendors and suppliers by assigning tasks and communicating expected deliverables.
• Made changes to project scope and cost and implemented most effective change management processes to keep project up-to-date.
• Developed solutions to project risks and issues, meeting quality and timeline goals and objectives.
• Communicated effectively with stakeholders to ensure project goals are met on time and within budget.
• Implemented effective communication protocols between internal teams working on different aspects of a given project.
• Ensured compliance with applicable laws, regulations, policies and procedures throughout the life cycle of each project.
• Created team objectives and roles with specific goals outlined for each individual.
• Determined project staffing needs and led resource management.
• Drove continuous improvement of project delivery process by providing strong leadership.
• Generated and tracked change orders and other contractual modifications affecting budget and schedule.
• Participated in cross-functional teams responsible for developing innovative solutions for complex problems.
• Drafted project construction schedule and updated as job progressed.
• Drafted reports summarizing progress made on projects for review by executive leadership team.
• Actively sought out feedback from stakeholders throughout the duration of a project in order to identify areas needing improvement or adjustment.
• Analyzed data from various sources such as surveys, interviews, focus groups. to inform decision-making related to projects.
• Advised other departments on best practices related to managing large-scale projects.
• Identified project needs by reviewing project objectives and schedules.
• Conferred with project personnel to identify and resolve problems.
• Participated in professional development opportunities to stay current with industry trends and technologies.
• Install the irrigation system, fix any issues, and reschedule the irrigation.
• Ensured proper irrigation system is in place and functioning properly.
• Responded quickly to emergency situations involving the irrigation system or its components.
• Programmed automatic controllers with specific settings for each zone of an irrigation system.
• Conducted regular maintenance on hoses, nozzles, piping and other components of an irrigation system.
• Trained staff on the safe use of tools and equipment related to irrigation system operations.
• Measured, cut, and joined pipes to create a functional irrigation system.
• Performed regular checks on all components of the irrigation system.
• Visually inspected entire irrigation system for signs of damage or wear and tear.
• Developed and maintained relationships with vendors to obtain necessary parts for irrigation system installations.
• Provided customers with detailed instructions on how to operate their new irrigation system.
• Assisted with irrigation system installation by laying out pipe work and connecting sprinkler heads.
• Provided irrigation system installation services including laying pipes and sprinklers.
• Assisted in the day-to-day operations of a small family farm, including crop planting and harvesting, soil preparation, irrigation system maintenance, and equipment operation.
• Provided assistance with irrigation system repairs when needed.
• Assisted landscape designers with selecting the best type of irrigation system for their projects based on budget constraints or soil conditions.
• Provided assistance with irrigation system repairs and maintenance.
• Troubleshot irrigation system issues and performed necessary repairs.
• Ensured that all parts of an irrigation system were functioning properly by performing tests regularly.
• Consulted with clients to determine their specific needs related to crop production and water availability before designing an irrigation system.
• Managed staff responsible for operating and maintaining various components of the irrigation system.
• Implemented best practices in irrigation system designs.
• Assisted with irrigation system installation and repairs as needed.
• Provided in-depth irrigation system demonstrations so that customers were aware of all features.
• Connected water supply lines to the irrigation system using fittings and valves.
• Investigated customer complaints regarding improper irrigation system installations or performance.
• Maintained accurate records of all irrigation system components, including timers, pumps, backflow preventers, pressure regulators.
• Conducted quality assurance inspections of irrigation system installations to ensure they met industry standards and customer expectations.
• Monitored soil fertility levels, pest control measures and irrigation systems.
• Organized digital media assets into a centralized database system.
• Operated automated irrigation systems to maintain appropriate water levels in greenhouses.
• Monitored irrigation systems for efficient operation throughout the season.
• Installed new equipment and systems according to manufacturer's specifications.
• Inspected irrigation systems for proper functioning and made necessary repairs when required.
• Developed strategies for improving the efficiency of existing irrigation systems by adjusting spray patterns or adding additional zones or components.
• Watered lawns as needed, including setting up irrigation systems.

• Completed day-to-day duties accurately and efficiently.
• Contributed innovative ideas and solutions to enhance team performance and outcomes.
• Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
• Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
• Prioritized and organized tasks to efficiently accomplish service goals.
• Identified needs of customers promptly and efficiently.
• Provided excellent service and attention to customers when face-to-face or through phone conversations.
• Assisted with customer requests and answered questions to improve satisfaction.
• Collaborated closely with team members to achieve project objectives and meet deadlines.
• Approached customers and engaged in conversation through use of effective interpersonal and people skills.
• Maintained updated knowledge through continuing education and advanced training.
• Exceeded customer satisfaction by finding creative solutions to problems.
• Recognized by management for providing exceptional customer service.
• Utilized advanced technical skills and expertise to troubleshoot complex problems and implement solutions.
• Demonstrated strong problem-solving skills, resolving issues efficiently and effectively.