Richard Helms
Lancaster,SC
Summary
Adept at enhancing system reliability and performance, I leveraged my expertise in equipment installation and maintenance. My proficiency in hand tools and commitment to workplace safety underscore my ability to meet employer expectations.Experienced in fast-paced environments and adaptable to last-minute changes. Thrives under pressure. Experienced and dependable general worker with a proven track record . Skilled in manual labor, equipment operation, and maintaining a clean and organized workspace. Safety-conscious with a strong work ethic and the ability to adapt to different environments. Ready to contribute to a dynamic team and make a positive impact.
Overview
9
9
years of professional experience
Work History
Sandblaster
SOUTHERN BLAST & RECONDITIONING LLC
MONROE, NC
07.2021 - 01.2025
- Monitored air pressure levels throughout the duration of the project to ensure consistent results.
- Adjusted nozzle size and pressure settings on the sandblaster to achieve desired results.
- Cleaned and maintained all sandblasting equipment after each job was completed.
- Followed established environmental regulations when disposing of waste generated from projects.
- Moved fingers over surfaces of carvings to verify smoothness of finish.
- Prepared surfaces for sandblasting by removing rust, dirt, paint, and other debris.
- Prioritized safety and wore personal protective equipment when handling hazardous materials including noxious, silica and mineral dust.
- Set up and operated sandblasting equipment according to safety protocols.
- Used hand tools such as chisels, hammers, scrapers, wire brushes for more detailed cleaning tasks.
- Addressed rough areas with sanding tools to provide smooth surfaces and edges.
- Inspected parts before and after sandblasting process to ensure quality control standards were met.
- Reviewed work order documents, technical models and requirements and specifications to complete precise cuts and achieve accurate results.
- Safely operated equipment to set up and prepare area for blasting.
- Completed day-to-day duties accurately and efficiently.
- Prioritized and organized tasks to efficiently accomplish service goals.
Fleet Mechanic
B&B Fleet
Monore, NC
07.2024 - 12.2024
- Repaired and replaced parts such as engines, transmissions, axles, brakes, steering systems and electrical components.
- Diagnosed vehicle malfunctions using computerized testing equipment.
- Identified potential problems with the vehicles before they occur by inspecting them regularly.
- Utilized electronic testing equipment to troubleshoot fuel, ignition and emissions control systems.
- Reconditioned and replaced pistons, bearings, gears and valves.
- Conferred with customers to obtain descriptions of vehicle problems and discuss repair requirements.
- Installed new filters and lubricants when necessary.
- Reviewed brakes and assessed whether pads needed replacement, discs should be turned or other service requirements.
- Used diagnostics and troubleshooting tools to identify failures and equipment issues.
- Checked fluid levels in differentials, transmissions and transfer cases.
- Conducted test drives before and after repair services.
- Coordinated preventive maintenance schedules for units.
- Conducted visual inspections of compressed natural gas fuel systems to identify cracks, discoloration and abrasions.
- Maintained vehicles by changing oil, checking batteries and lubricating components.
- Disassembled units and inspected parts for wear with micrometers, calipers and gauges.
- Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
- Performed preventative maintenance on fleet vehicles, including oil changes, brake repairs and tire rotations.
- Cleaned engine parts and other components during repair work.
- Exceeded customer satisfaction by finding creative solutions to problems.
- Completed routine maintenance and repair.
- Operated a variety of machinery and tools safely and efficiently.
STOCKING VENDING MACHINES
OLYMPIC VENDING
Lancaster, SC
03.2018 - 06.2021
- Ran tests on newly repaired machinery and equipment to confirm proper functionality.
- Adjusted, connected, or disconnected wiring, piping and tubing to complete repairs and installations.
- Restocked items in the vending machine after sales had been made.
- Identified problems in vending machines and provided solutions to fix them.
- Replaced faulty parts in vending machines when necessary.
- Greased mechanical parts with lubrication to achieve smooth and regular functionality.
- Loaded products into vending machines according to customer preferences.
- Performed preventive maintenance tasks on a regular basis to ensure long-term performance.
- Troubleshot malfunctions and diagnosed issues to service equipment quickly and fully.
PALLET RACK INSTALLER
Allen Industrial Services, LLC
Clayton, NC
08.2015 - 02.2018
- Mounted and connected mechanical and electrical equipment according to specifications.
- Took measurements and evaluated dimensions of surrounding area to correctly install new machinery.
- Completed scheduled appointments on time to drive quality service.
- Tested installed hardware and software to ensure proper functioning.
- Maintained inventory of supplies, materials and tools to complete work on job sites.
- Adjusted, connected, or disconnected wiring, piping and tubing to complete repairs and installations.
- Greased mechanical parts with lubrication to achieve smooth and regular functionality.
- Utilized a variety of hand and power tools to cut, shape, and fit materials for installation.
- Relayed important safety guidelines to clients to achieve thorough understanding of new equipment.
- Provided training sessions for end-users on how to use newly installed applications.
- Inspected service vehicles and notified supervisors of needed repair and maintenance requirements.
- Tested and troubleshot systems to alleviate potential issues.
- Replaced defective hardware components when needed.
- Installed various types of flooring, ensuring precise alignment and securing materials properly.
- Installed new components or replaced defective parts to restore functionality.
- Ensured work area cleanliness and safety, preventing accidents and maintaining a professional environment.
- Followed safety guidelines and wore protective gear when using power drills, circular saws, and other power tools.
- Provided exceptional customer experiences to service recipients.
- Developed strong relationships with suppliers to ensure timely delivery of high-quality materials.
- Provided customer education on system maintenance and operation post-installation.
- Enhanced product functionality through careful calibration and adjustments during installation.
- Promoted additional services and products to clients, contributing to business growth.
- Removed systems and fixtures to prepare for replacements.
- Coordinated with project managers and other tradespeople to ensure timely project completion.
- Conducted pre-installation site visits to measure, evaluate, and plan installations, reducing project delays.
- Troubleshot and resolved installation issues promptly, minimizing impact on project timeline and customer satisfaction.
- Performed troubleshooting to diagnose and resolve system issues.
- Developed strategies to improve system performance and reliability by making recommendations regarding upgrades or changes in design specifications.
- Ran tests on newly repaired machinery and equipment to confirm proper functionality.
- Routinely inspected equipment for preventive and emergency maintenance needs.
- Assisted with customer requests and answered questions to improve satisfaction.
- Managed time effectively to ensure tasks were completed on schedule and deadlines were met.
Education
GED -
Adult Education
Lancaster,south Carolina 06-2008
Skills
- Basic math
- Sandblasting safety protocols
- Maintenance and repair
- ISO standards awareness
- Quality assurance monitoring
- Hazardous waste disposal
- Professionalism and work ethic
- Equipment troubleshooting
- Workplace safety
- Machine maintenance
- Product stocking
- Hand tools proficiency
- Equipment installation
- Hardware repair
- Taking precise measurements
- Quality assurance
- Commercial construction experience
- Regulatory compliance
- Hand-eye coordination
- Customer relations
- Attention to detail
- Customer service
- Fleet Vehicle Upkeep
- Residential and commercial installations
- Loading and unloading
- Positive attitude
- Equipment operation
- Equipment handling
- Maintenance and repair reporting
- Component repairs
- Preventive Maintenance
- Residential construction
- Time management
- Power tool operation
- Repair techniques
- Safety awareness
- Hardware installation
- Clutch repair
- Battery maintenance
- Roadside assistance
- Fluid level checks
- Suspension system maintenance
- Air conditioning service
- Fuel system repair
- OSHA compliance
- Tire maintenance
- Heavy equipment maintenance
- Oil change procedures
- Scheduling service
- Steering system repair
- Operating equipment
- Brake system repair
- Filter replacement
- Exhaust system repair
- Handling service calls
- Chassis lubrication
- Preventative maintenance
- Drive train repair
- Work order management
- Gearbox repair
- Fleet management
Timeline
Fleet Mechanic
B&B Fleet
07.2024 - 12.2024
Sandblaster
SOUTHERN BLAST & RECONDITIONING LLC
07.2021 - 01.2025
STOCKING VENDING MACHINES
OLYMPIC VENDING
03.2018 - 06.2021
PALLET RACK INSTALLER
Allen Industrial Services, LLC
08.2015 - 02.2018
GED -
Adult Education
Similar Profiles
Edward MataEdward Mata
Owner at MGM Automotive Reconditioning LLCOwner at MGM Automotive Reconditioning LLC
Jesus LaresJesus Lares
Painter at Lares Blast and Spray LLCPainter at Lares Blast and Spray LLC
Jason ByerlyJason Byerly
Owner at Omni Blast LLCOwner at Omni Blast LLC
Brian DawsonBrian Dawson
Director Design Services at Aalberts-IPSDirector Design Services at Aalberts-IPS
Trevor SmallTrevor Small
Customer Solutions Representative at AllyCustomer Solutions Representative at Ally