Robert Munguia Jr

• Overall management of Microsoft Data Center Construction and Retrofitting in San Antonio TX Area.
• Monitor Contractor’s EHS performance to ensure that all Contractor's are in compliance with their stated practices and procedures, regulatory requirements and any additional owner expectations/deliverables that may have been identified in the contract of work EHS Schedule.
• Interface and support the construction management team at site by delivering current data on Contractor EHS performance, including: trending, incident management, EHS metrics and other key information that enable DC construction management to make informed timely decisions.
• Participate in communication methods, such as safety meetings and notices to ensure relevant EHS information is communicated across the site by Contractor’s and ensure that DC management is included as well.
• Ensure a weekly site safety walk is conducted with the Contractor management representative and the Owner’s PM/team.
• Create, Oversee & Participate in a daily site safety walk with the Contractor safety rep.
• Act as a coach and advisor to the Contractor safety committee.
• Evaluate the completeness and effectiveness of the Contractor’s hazard assessments (RAMS, JHAs, ARTs, etc.).
• Lead creation of Significant Events(SE) and Significant Potential Events(SPE).
• When non-compliance and/or non-conformance is observed, immediately bring the issue to the attention of that individual and key stakeholders as appropriate.
• Ensure KPIs, leading/lagging indicators and EHS data submitted by the Contractor is accurate, timely and complete.
• Conduct & Review monthly Contractor EHS audits.
• Create and Coordinate Budget for new construction and overall finance review of the safety program.
• Assist in design reviews throughout the Life Cycle-planning, as requested/required (Design, permitting, construction, cx, handover, etc.).
• Evaluate/audit Site Specific Safety Plan to conformance to Project Manual requirements and understand and ensure operational EHS requirements are adhered to.
• Maintain and foster relations with the Client Operations Teams & Support Client initiatives as requested.

SN 7,1,2 & 4 Microsoft Data Center Construction San Antonio TX

Routinely monitor the Contractor’s EHS performance to ensure that the Contractor is in
compliance with their stated practices and procedures, regulatory requirements and any
additional owner expectations/deliverables that may have been identified in the contract
of work EHS Schedule.
● Interface and support the construction management team at site by delivering current
data on Contractor EHS performance, including: trending, incident management, EHS
metrics and other key information that enable DC construction management to make
informed timely decisions.
● Participate in communication methods, such as safety meetings and notices to ensure
relevant EHS information is communicated across the site by Contractor’s and ensure
that DC management is included as well.
● Ensure a weekly site safety walk is conducted with the Contractor management
representative and the Owner’s PM/team.
● Participate in a daily site safety walk with the Contractor safety rep.
● Act as a coach and advisor to the Contractor safety committee.
● Evaluate the completeness and effectiveness of the Contractor’s hazard assessments
(RAMS, JHAs, ARTs, etc.).
● Lead creation of Significant Events(SE) and Significant Potential Events(SPE).
● When non-compliance and/or non-conformance is observed, immediately bring the issue
to the attention of that individual and key stakeholders as appropriate.
● Ensure KPIs, leading/lagging indicators and EHS data submitted by the Contractor is
accurate, timely and complete.
● Conduct the monthly Contractor EHS audit.
● Participate in progress and schedule meetings.
● Assist in design reviews throughout the Life Cycle-planning, as requested/required
(Design, permitting, construction, cx, handover, etc.).
● Attend internal trainings as requested.
● Evaluate/audit Site Specific Safety Plan to conformance to Project Manual requirements.
● Understand and ensure operational EHS requirements are adhered to.
● Maintain and foster relations with the Client Operations Teams.
● Support Client initiatives as requested.

• Directs and coordinates environmental, health and safety activities for multiple plants in plastic injection manufacturing operations to include strategic direction, data trending/analysis, staff development, corporate policy development, training, and audits/inspections.
• Facilitate open communication between departments (Production/Injection, Quality,Maintenance,Tooling, Materials/Shipping Receiving) regarding EHS concerns and suggestions, promoting a unified approach towards workplace safety and goals to achieve zero injury free workplace.
• Develop and revise corporate policies as needed to support the objectives of the EHS dept.
• Created and implemented Manufacturing Workplace Safety Council involving each dept to identify opportunities for continuous improvement in EHS processes through weekly facility audits on each workcell and equipment associated with the workcell (injection presses/molds, secondary equipment, conveyors etc).
• Monitor safety action items, ensuring that the responsible party is taking corrective action and maintain records for follow up.
• Implemented ergonomic improvements in workspaces to reduce strain-related injuries among employees, enhancing overall wellbeing for a manufacturing environment.
• Reduced workplace accidents through proactive risk assessments and hazard identification initiatives across all depts. (housekeeping audits, 5S implementation)
• Conducted thorough incident investigations to determine root causes (5 whys) and implement corrective actions, preventing recurrence of similar events and managed injury reporting internal/external for workers compensation and OSHA log reports.
• Monitor leading and lagging indicators to inform priority decisions and strategic direction. Provide information/updates to corporate leaders as appropriate to ensure that department objectives and activities are aligned with overall business objectives.
• Prepare and/or present monthly safety statistics to appropriate stakeholders including safety metrics (KPI), workers compensation cost summaries (Loss Run Analysis), and other related information.
• Manage budget, incentive issues, and other business issues relation to the EHS function.
• Reviewed facility layout designs for new construction projects to ensure adherence to EHS best practices from the planning stage onwards (new georgetown facility)
• Coordinated/conducted audits of company facilities to ensure adherence to established regulations while identifying areas for improvement within EHS processes (fall protection, aerial lift/forklift safety, hot work permits, Lock Out Tag Out procedures, Overhead Crane Safety & Arc flash.
• Promote a culture of safety throughout the organization by consistently emphasizing its importance of EHS policy, practices and procedures during contractor orientation management meetings, management trainings, and daily KPI reporting & meetings.
• Establish and maintain safety programs and industrial hygiene duties such as, but not limited to, hearing conservation, blood borne pathogens, personal protective equipment, and others as required by standards and regulations.
• Served as a liaison between management and regulatory agencies, fostering positive relationships while addressing any concerns or non-compliance issues promptly (City of Austin water/EMS, OSHA & TCEQ)
• Secured necessary permits (SWPPP, Tier II, City of Austin Cooling tower) for company operations by accurately preparing applications detailing compliance with applicable regulations.
• Lead Waste minimization efforts. Ensure safe and appropriate storage of waste and other chemicals in compliance with federal, state & local standards.
• Developed emergency response plans and coordinated drills, significantly improving preparedness for potential incidents.

• Site Safety manager Tesla Giga Factory (Manufacturing) & Microsoft Data Center
• Oversee controlling hazardous working conditions and unsafe employee activities through interface with project management/supervisory personnel. Audit daily/weekly specific job tasks to ensure compliance with company and client policies. Daily inspections on Job Safety Environmental Analysis (JSEA) and Daily Task Analysis (DTA) in accordance with Microsoft standards for daily, weekly and monthly metrics for corporate based reporting systems.
• Conduct risk assessments audits, project oversite and site coordination related to construction and electrical site standards (LOTO, trenching/excavation, hoisting and rigging, fall protection)
• Provide safety training and new hire orientation for construction and electrical standards and includes, aerial lifts and forklift operators
• Ensure site permits (hotwork, excavation, crane/rigging) and regulatory documentation are compliant in accordance with client and government policies & standards. Maintain all documentation that is readily available and include training to site management on content and site specific locations to ensure documents availability during internal and external audits.
• Aligned work processes with bodily mechanics to improve job function which reduced workplace repetitive movement injuries.
• Participate, oversee and provide guidance in all safety incidents, spills, near misses and providing corrective guidance, follow up, reporting, documentation and closure.
• Organize and lead weekly site safety meetings and site walks in alignment with Tesla and Microsoft values on committing to cultivate an inclusive work environment for all employees safety.

• Developed short-term goals and long-term strategic plans to improve risk/loss control and mitigation in the manufacturing & construction industry.
• Advised senior management on policy strategies for reducing liability and security of company assets.
• Promoted enterprise-level risk management practices and helped instill strong culture focused on protective policies and procedures for loss control, liabilities, claims, employee injuries and implemented protective measures to mitigate risks.
• Assisted with minimizing risk exposure by reviewing claim validity and viability against coverage standards.
• Handled construction and automotive industry claims according to internal risk management policies, keeping liability minimized by leveraging expertise and available tools.
• Instituted regular safety inspections and hazards management strategies to keep operations compliant and risk free.
• Employed strong program management skills to successfully define and manage ongoing initiatives designed to control safety risks.
• Trained clients in risk management policies and monitored compliance to control company liability.

• Provided environmental, safety & ER oversight,guidance to over 47 terminals and over 3000 miles of pipeline across 5 states.
• Monitoring and interpreting federal, state and local regulations (RCRA, CERCLA, SWPP, Title V permitting, SARA, Tier II, TRI reporting, pollution prevention (P2 Plans), OPA 90 Prep exercises & Spill Prevention Countermeasures and Controls).
• Reviewed, interpreted and communicated current and proposed legislation in the oil & gas industry to determine applicability for regional areas (Colorado, Texas, Oklahoma, New Mexico & Louisiana.
• Managed environmental & safety program budgets, project oversight & compliance for operational support which included Environmental Health & Safety Training (annual HAZWOPER refresher, Incident Command Systems, haz/nonhaz waste, SW3P, lockout/tag out, construction safety, confined space, fire safety, Incident Investigation and Reporting, haz comm, ergonomics, OSHA form 300 logs of work-related injuries and illnesses.
• Liaised with federal & county departments to develop and maintain environmental, safety-related programs & emergency response situations & procedures along with compliance tasks (PHMSA, OSHA, EPA, TCEQ, Homeland Security, US Coast Guard, General Land Office).
• Performed environmental, safety ,ER site assessments & remediation recommendations according to federal and states regulations. In addition implemented process safety management for each terminal throughout the region.
• Conducted compliance audits of company facilities and recommended appropriate corrective action in the event of non-compliance.
• Formulated approach and audit response regarding reporting issues to federal agencies under audit disclosure policies.
• Investigated accidents and analyzed root causes to develop corrective action plans.
• Managed & monitored safety performance, which included behavior-based safety performance trends or other indicators of improving or degrading incident performance and develop and implement strategic solutions that improved performance results.
• Managed and implement leak detection and repair (LDAR) programs for midstream terminals in compliance with method 21.

• Working knowledge of health & safety practices & training from various oil and gas clients which included job safety analysis (JSA), daily/weekly toolbox meeting, lockout/tagout training, confined space, fall protection & ergonomics.
• Responsible for performing investigation field work, including soil boring, well sampling and on job contractor oversight.
• Assisted in environmental & ER consulting work in TX & Ok
• Assisted in data interpretation of site work plans, spreadsheets, figures, technical reports and site permits.
• ArcGIS project creation, spatial analysis and data management.
• Assisted with project planning, budgeting and reporting.