Rodrigo Cantu

• Assisted other tradespeople in completing their tasks related to the installation of new boilers.
• Used hand tools such as wrenches, screwdrivers, hammers and pliers to complete repairs on boilers.
• Installed new boilers in accordance with local codes and regulations.
• Provided guidance and instruction regarding safe operation of newboilers to customers upon completion of installation projects.
• Inspected boilers for problems with pressure levels, water levels, temperature control or fuel supply.
• Checked for gas leaks in pipes and joints using a combustible gas indicator.
• Operated cutting torches to cut metal parts according to blueprints or diagrams.
• Sealed joints between sections of the boiler shell with cement mortar or asbestos packing.
• Cleaned and maintained tools used for boiler repair work.
• Read blueprints or technical drawings related to boiler installations.
• Constructed steel frames around boilers prior to installation.
• Replaced defective valves or gaskets on high-pressure steam lines.
• Read and understood drawings and used mathematical calculations for accurate results.
• Opened, cleaned and repaired pressure vessels.
• Located and marked reference points for columns or plates on boiler foundations using blueprints and measuring instruments.
• Worked with team to lift heavy sections into place using rigging and signals.
• Inspected and assembled tubes, fittings, valves, controls and auxiliary mechanisms to locate defects.
• Studied blueprints to determine locations, relationships, and dimensions of parts.
• Used hoist to load structural parts of boilers, pressure vessels, and tanks on pallets.
• Analyzed specifications, diagrams and blueprints for each job.
• Signaled to crane operator to lift components to specific positions.
• Fabricated replacement parts needed during repairs using metalworking machines.

• Assisted other tradespeople in completing their tasks related to the installation of new boilers.
• Used hand tools such as wrenches, screwdrivers, hammers and pliers to complete repairs on boilers.
• Installed new boilers in accordance with local codes and regulations.
• Provided guidance and instruction regarding safe operation of newboilers to customers upon completion of installation projects.
• Inspected boilers for problems with pressure levels, water levels, temperature control or fuel supply.
• Checked for gas leaks in pipes and joints using a combustible gas indicator.
• Operated cutting torches to cut metal parts according to blueprints or diagrams.
• Sealed joints between sections of the boiler shell with cement mortar or asbestos packing.
• Cleaned and maintained tools used for boiler repair work.
• Read blueprints or technical drawings related to boiler installations.
• Constructed steel frames around boilers prior to installation.
• Replaced defective valves or gaskets on high-pressure steam lines.
• Read and understood drawings and used mathematical calculations for accurate results.
• Opened, cleaned and repaired pressure vessels.
• Located and marked reference points for columns or plates on boiler foundations using blueprints and measuring instruments.
• Worked with team to lift heavy sections into place using rigging and signals.
• Inspected and assembled tubes, fittings, valves, controls and auxiliary mechanisms to locate defects.
• Studied blueprints to determine locations, relationships, and dimensions of parts.
• Used hoist to load structural parts of boilers, pressure vessels, and tanks on pallets.
• Analyzed specifications, diagrams and blueprints for each job.
• Signaled to crane operator to lift components to specific positions.
• Fabricated replacement parts needed during repairs using metalworking machines.

• Assisted other tradespeople in completing their tasks related to the installation of new boilers.

• Used hand tools such as wrenches, screwdrivers, hammers and pliers to complete repairs on boilers.

• Installed new boilers in accordance with local codes and regulations.

• Provided guidance and instruction regarding safe operation of newboilers to customers upon completion of installation projects.

• Inspected boilers for problems with pressure levels, water levels, temperature control or fuel supply.

• Checked for gas leaks in pipes and joints using a combustible gas indicator.

• Operated cutting torches to cut metal parts according to blueprints or diagrams.

• Sealed joints between sections of the boiler shell with cement mortar or asbestos packing.

• Cleaned and maintained tools used for boiler repair work.

• Read blueprints or technical drawings related to boiler installations.

• Constructed steel frames around boilers prior to installation.

• Replaced defective valves or gaskets on high-pressure steam lines.

• Read and understood drawings and used mathematical calculations for accurate results.

• Opened, cleaned and repaired pressure vessels.

• Located and marked reference points for columns or plates on boiler foundations using blueprints and measuring instruments.

• Worked with team to lift heavy sections into place using rigging and signals.

• Inspected and assembled tubes, fittings, valves, controls and auxiliary mechanisms to locate defects.

• Studied blueprints to determine locations, relationships, and dimensions of parts.

• Used hoist to load structural parts of boilers, pressure vessels, and tanks on pallets.

• Analyzed specifications, diagrams and blueprints for each job.

• Signaled to crane operator to lift components to specific positions.

• Fabricated replacement parts needed during repairs using metalworking machines.

• Assisted other tradespeople in completing their tasks related to the installation of new boilers.

• Used hand tools such as wrenches, screwdrivers, hammers and pliers to complete repairs on boilers.

• Installed new boilers in accordance with local codes and regulations.

• Provided guidance and instruction regarding safe operation of newboilers to customers upon completion of installation projects.

• Inspected boilers for problems with pressure levels, water levels, temperature control or fuel supply.

• Checked for gas leaks in pipes and joints using a combustible gas indicator.

• Operated cutting torches to cut metal parts according to blueprints or diagrams.

• Sealed joints between sections of the boiler shell with cement mortar or asbestos packing.

• Cleaned and maintained tools used for boiler repair work.

• Read blueprints or technical drawings related to boiler installations.

• Constructed steel frames around boilers prior to installation.

• Replaced defective valves or gaskets on high-pressure steam lines.

• Read and understood drawings and used mathematical calculations for accurate results.

• Opened, cleaned and repaired pressure vessels.

• Located and marked reference points for columns or plates on boiler foundations using blueprints and measuring instruments.

• Worked with team to lift heavy sections into place using rigging and signals.

• Inspected and assembled tubes, fittings, valves, controls and auxiliary mechanisms to locate defects.

• Studied blueprints to determine locations, relationships, and dimensions of parts.

• Used hoist to load structural parts of boilers, pressure vessels, and tanks on pallets.

• Analyzed specifications, diagrams and blueprints for each job.

• Signaled to crane operator to lift components to specific positions.

• Fabricated replacement parts needed during repairs using metalworking machines.

• Assisted other tradespeople in completing their tasks related to the installation of new boilers.
  • Used hand tools such as wrenches, screwdrivers, hammers and pliers to complete repairs on boilers.
  • Installed new boilers in accordance with local codes and regulations.
  • Provided guidance and instruction regarding safe operation of newboilers to customers upon completion of installation projects.
  • Inspected boilers for problems with pressure levels, water levels, temperature control or fuel supply.
  • Checked for gas leaks in pipes and joints using a combustible gas indicator.
  • Operated cutting torches to cut metal parts according to blueprints or diagrams.
  • Sealed joints between sections of the boiler shell with cement mortar or asbestos packing.
  • Cleaned and maintained tools used for boiler repair work.
  • Read blueprints or technical drawings related to boiler installations.
  • Constructed steel frames around boilers prior to installation.
  • Replaced defective valves or gaskets on high-pressure steam lines.
  • Read and understood drawings and used mathematical calculations for accurate results.
  • Opened, cleaned and repaired pressure vessels.
  • Located and marked reference points for columns or plates on boiler foundations using blueprints and measuring instruments.
  • Worked with team to lift heavy sections into place using rigging and signals.
  • Inspected and assembled tubes, fittings, valves, controls and auxiliary mechanisms to locate defects.
  • Studied blueprints to determine locations, relationships, and dimensions of parts.
  • Used hoist to load structural parts of boilers, pressure vessels, and tanks on pallets.
  • Analyzed specifications, diagrams and blueprints for each job.
  • Signaled to crane operator to lift components to specific positions.
  • Fabricated replacement parts needed during repairs using metalworking machines.

• Identified potential hazards associated with pipe installation activities and took necessary measures to eliminate them.
• Investigated customer complaints about existing pipelines or installation issues promptly addressing them as needed.
• Organized and supervised the installation of pipes in accordance with design specifications.
• Conducted regular inspections of equipment used in piping installations such as cranes, hoists, scaffolding, ladders.
• Resolved conflicts between different departments by providing clear instructions that were easy to understand.
• Trained new employees on proper pipe handling techniques, safety protocols, and other related procedures.
• Monitored and coordinated the daily activities of workers on-site to ensure a safe work environment.
• Coordinated with engineers to review designs and plan layout of piping systems prior to installation.
• Reviewed blueprints and schematics before beginning any installation activity in order to prevent errors.
• Evaluated material requirements for each project based on engineering drawings and specifications.
• Developed and implemented piping plans for projects to ensure compliance with safety, quality, and environmental standards.
• Reviewed project blueprints and specifications to determine number of workers needed to complete jobs.
• Trained and monitored employees to teach daily tasks and improve performance.
• Reported project progress, site problems and labor status to supervisors.
• Prepared and planned worksites to help jobs run smoothly.
• Allocated material and labor resources to promote on-time and under-budget project completion.
• Created work crew schedules and delegated assignments.

• Maintained records of time sheets and materials used for each job.
• Instructed crew members in proper techniques for cutting, welding, threading, assembling, measuring, bending and joining pipes or tubes.
• Monitored and supervised crews of up to ten workers in the safe installation of piping systems, ensuring that all work was completed according to OSHA regulations.
• Created detailed reports regarding each project's progress and any associated problems or delays encountered along the way.
• Resolved conflicts between crew members in a timely manner using effective communication skills.
• Conducted regular maintenance checks on tools and equipment used by crews to identify any potential issues before they arise.
• Inspected and tested pipes for leaks or other defects and made necessary repairs.
• Provided technical support to pipefitters as needed during installations.
• Coordinated with other departments to ensure efficient completion of projects.
• Directed fabrication of components needed for specific jobs.
• Reviewed project blueprints and specifications to determine number of workers needed to complete jobs.
• Prepared and planned worksites to help jobs run smoothly.

• Implemented Lean Six Sigma principles into daily operations to streamline workflows, increase efficiency, and reduce overhead expenses.
• Designed efficient layouts of equipment, materials, and workspace to optimize workflow.
• Performed time studies to determine how long certain tasks take so that appropriate staffing levels can be determined.
• Developed safety protocols to ensure compliance with OSHA standards in all facilities.
• Provided guidance on the selection of appropriate machinery or equipment for specific applications.
• Evaluated existing materials handling methods and identified ways to reduce manual handling risks.
• Managed inventory levels by analyzing stock usage patterns and making recommendations on reordering points.
• Assessed current operational performance metrics and analyzed data trends to identify opportunities for improvement.