ROMEO R. SANPEDRO JR.
RaeFord,USA
Summary
Ground support equipment L7 HVAC mechanic with expertise in diagnostics, preventive maintenance, quality control, and technical inspections. Restores equipment to specification to support operational readiness. Maintains accurate maintenance records and delivers junior mechanic training. Applies safety-first practices and documented troubleshooting across ground support and generator systems.
Overview
16
16
years of professional experience
Work History
Ground Support Equipment Mechanic
V2X
Fort Bragg, NC
06.2026 - Current
- Obtained EPA Section 609 certification to ensure compliance with environmental regulations.
- Recovered, recycled, and recharged vehicle A/C systems in compliance with EPA Section 609 requirements while handling R-134a and R-1234yf with zero safety or environmental incidents.
- Cleaned contaminated lines, replaced failed A/C compressors, expansion valves, and receiver-driers across multiple vehicle platforms, ensuring successful post-repair performance tests.
- Diagnosed mechanical issues using specialized tools and systems to restore functionality efficiently.
- Led troubleshooting efforts for electrical power outputs, reducing equipment downtime and enhancing operational efficiency.
- Conducted thorough inspections and preventative maintenance tasks, ensuring equipment reliability and continuous operational capability.
- Performed initial technical inspections for the 82nd CAB ground support equipment to verify operational readiness.
- Improved repair processes by implementing standardized procedures for efficiency and quality control.
- Trained junior mechanics in equipment maintenance best practices and safety protocols, fostering a culture of safety and competence.
Field Service Representative
Ricardo Defense / Detroit Defense
Fort Bragg, NC
01.2023 - 09.2025
- Troubleshot equipment faults and implemented corrective actions, enhancing performance and reliability.
- Inspected, tested, and verified maintenance repairs and services on ISVs for operational readiness and compliance with standards.
- Completed technical inspections on 61 ISVs, including Infantry Squad Vehicles, TEWS M1301s, and XM1301s.
- Performed post-heavy-air-drop inspections to confirm ISV platform met air movement transportability requirements.
- Streamlined maintenance flow in motor pool by preparing tools, ordering parts and supplies, and minimizing turnaround and job completion time.
- Supported CONUS deployments with units for Hurricane Helene humanitarian mission in western NC and training missions at Ft. Bragg, NC, Ft. Belvoir, VA, Ft. Polk, LA, and Camp Shelby, MS.
- Coordinated load-out support missions from GM Defense Plant #9 and GM Plant MCIC in Concord, NC, ensuring efficient logistics and execution.
- Completed renewal of Section 609 certification to ensure compliance.
- Provided engineering teams with customer feedback to guide product improvement efforts.
GSE Generator Mechanic/Tech Quality Inspector
V2X / Vectrus
Fort Bragg, NC
12.2019 - 12.2022
- Diagnosed and repaired generator systems to support performance and reliability.
- Inspected and verified maintenance, repairs, and services on ground support generators and wheeled equipment, ensuring operational readiness.
- Performed technical inspections on wheeled vehicles, trailers, and power generation equipment to support safety compliance.
- Conducted load tests on lifting equipment to assess performance and safety, then recorded pass or fail results for compliance documentation.
- Ensured compliance with EPA Section 609 regulations in vehicle A/C systems.
- Recovered, recycled, and recharged vehicle A/C systems in compliance with EPA Section 609 requirements while handling R-134a and R-1234yf with zero safety or environmental incidents.
- Repaired contaminated lines by replacing failed A/C compressors, expansion valves, and receiver-driers across multiple vehicle platforms, achieving successful post-repair performance tests.
Facility Maintenance Technician II
Amentum- GE Engine Facility
Durham, NC
07.2019 - 04.2020
- Diagnosed and resolved mechanical issues on various equipment to maintain operational efficiency.
- Conducted routine inspections and preventive maintenance to uphold safety standards.
- Identified and implemented work improvements that streamlined job order turnaround and completion by proactively preparing tools, supplies, work procedures, and personnel.
- Installed process and production machinery, increasing operational capacity and enabling higher output.
- Fabricated and modified tooling stands and workstations, optimizing workflow and enhancing overall efficiency.
- Updated safety records and job order documentation to ensure compliance with standards.
QA/QC / Senior Document Developer / Principal Trainer Armored
Vinnell Arabia
Riyadh, Saudi Arabia
05.2014 - 05.2019
- Technically inspected vehicles through operational and functional testing, ensuring compliance with Vinnell Arabia's Quality Assurance standards.
- Applied Saudi Arabia National Guard Modernization Program publications to conduct inspections per Standard Operating Procedure, ensuring compliance and operational readiness.
- Inspected LAV Assault Gun and LAV Mortar variants for Battle Damage Assessment and Repair, identifying critical hull faults.
- Researched subject matter data to ensure faults were properly documented, and correct parts were requested for repairs on all levels of maintenance.
- Edited and quality checked Light Armored Vehicle (LAV) variant manuals, ensuring accuracy and completeness for timely final delivery.
- Developed the English LAV Technical publications for Saudi Arabia's Ministry of National Guard; Vinnell Arabia's Institutional Training Division.
- Coordinated with cross-functional teams to streamline documentation processes, resulting in improved workflow efficiency and reduced turnaround time.
- Repaired and maintained various LAV variants including AT-LAV, AG-LAV, CC-LAV, W-LAV, 25 LAV, and LAV Ambulance through Battle Damage Assessment and Repair procedures.
- Troubleshot and repaired the Automatic Fire Sensing and Suppression Systems (AFSS) and trained the refilling station for AFSS bottles.
MHE Heavy Mechanic III
Dav- Force/ Honeywell
Charleston, USA
09.2013 - 05.2014
- Diagnosed and repaired faults in RTCH and MHE components to restore function.
- Used advanced diagnostic tools and equipment to identify mechanical issues.
- Inspected U.S. Army vehicles through operation and function testing to meet quality assurance standards.
- Planned and conducted repairs and services in alignment with inspectors' load testing guidelines.
- Performed preventive maintenance in accordance with U.S. Army technical manual -10/-20.
- Coordinated direct support and general support maintenance workflows, enhancing overall maintenance productivity.
- Read and interpreted electrical, hydraulic, and pneumatic schematics.
- Executed Section 609 maintenance tasks to ensure compliance with operational standards.
Machinist Set- Up Mechanic
Robert- Bosch
Charleston, USA
10.2013 - 05.2014
- Set up, adjusted, and operated basic and specialized machine tools to achieve precision machining results.
- Machined the parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders.
- Aligned and secured the holding fixtures, cutting tools, attachments, accessories, or materials onto the machines.
- Calculated the dimensions and tolerances using instruments such as micrometers and Vernier calipers.
- Measured, examined, or tested the completed units to check for defects and ensured conformance to specifications using precision instruments such as micrometers.
- Quality controlled fuel injectors by categorizing machined bore honed diameters, ensuring compliance with specifications and enhancing product reliability.
- Oversaw production workflow and monitored machine feed speed to optimize efficiency and ensure timely project completion.
- Maintained the machine tools in proper operational condition.
- Studied the sample parts, blueprints, drawings, and engineering information to determine the methods or sequences.
Technical Inspector/ Direct Support Lead Heavy Mechanic
Itt Exelis
Ariqjan, Kuwait
04.2011 - 04.2012
- Recovered, recycled, and recharged vehicle A/C systems in compliance with EPA Section 609 while handling R-134a and R-1234yf with zero safety or environmental incidents.
- Replaced failed A/C compressors, expansion valves, and receiver-driers across multiple vehicle platforms, then passed post-repair performance tests.
- Inspected brake systems, steering mechanisms, and wheel bearings to confirm proper operating condition and improve vehicle safety.
- Adjusted and relined brakes, aligned wheels, and reassembled equipment to enhance vehicle safety and performance.
- Test-drove trucks and buses to identify malfunctions and confirm proper operation.
- Conducted examinations and adjustments of safety devices and protective guards, promoting operational safety and reliability.
- Managed direct support and general support maintenance processes, ensuring compliance with protocols and optimizing workflow.
- Trained and mentored DSGS team in maintenance, safety, HAZMAT, and technical publications.
Mechanic/ INLS Maintenance Technician
SEA FIX
Saipan, Northern Marianas Islands
06.2010 - 12.2010
- Recovered, recycled, and recharged vehicle A/C systems in line with EPA Section 609 requirements while handling R-134a and R-1234yf without safety or environmental incidents.
- Replaced failed A/C compressors, expansion valves, and receiver-driers across multiple vehicle platforms, then verified repair performance.
- Coordinated workflow, personnel, parts, and tools for maintenance work to ensure efficient operations.
- Diagnosed and repaired geothermal plant equipment, electrical systems, and instrumentation to maintain operational integrity.
- Monitored and adjusted geothermal power plant systems and power output to meet load demands; installed and maintained electrical protection equipment, switchgear, process controls, and control equipment per plant procedures.
Education
Light Armored Vehicle Mortar Maintenance Training Program -
General Dynamics Land Systems
London, CanadaMaritime Prepositioned Force Afloat Maintenance Training -
Blount Island Command
Jacksonville, FLCertificate for Intro to Maintenance Support Device -
TACOM Tech Assist
KuwaitCertificate for Integrated Logistics Analysis Program -
Team Coalition Forces Land Component Command
KuwaitSouth Carolina Technical and Comprehensive Training -
Westinghouse
Ladson, SCDuPont Maintenance Training -
Trident Technical College
Charleston, SCHigh School Diploma -
Summerville High School
Summerville, SCSkills
- Diagnostics troubleshooting
- Quality assurance
- Electrical systems expertise
- Preventive maintenance
- Training and mentoring
- Technical inspections
- OSHA compliance knowledge
- Problem-solving skills
- Ground support equipment repair
- EPA compliance
- Electrical component diagnostics
- Safety compliance inspections
LANGUAGES
English, Full Professional
Accomplishments
- I accomplished a 95% full mission capable status for the 2nd 82nd Brigade Combat Teams entire fleet of GM Infantry Squad Vehicles (M1301s).
- Led the GSE Section to achieve the highest first-time Quality Control (QC) pass rate within the 82nd CAB, streamlining maintenance workflows and significantly reducing equipment downtime.
Timeline
Ground Support Equipment Mechanic
V2X
06.2026 - Current
Field Service Representative
Ricardo Defense / Detroit Defense
01.2023 - 09.2025
GSE Generator Mechanic/Tech Quality Inspector
V2X / Vectrus
12.2019 - 12.2022
Facility Maintenance Technician II
Amentum- GE Engine Facility
07.2019 - 04.2020
QA/QC / Senior Document Developer / Principal Trainer Armored
Vinnell Arabia
05.2014 - 05.2019
Machinist Set- Up Mechanic
Robert- Bosch
10.2013 - 05.2014
MHE Heavy Mechanic III
Dav- Force/ Honeywell
09.2013 - 05.2014
Technical Inspector/ Direct Support Lead Heavy Mechanic
Itt Exelis
04.2011 - 04.2012
Mechanic/ INLS Maintenance Technician
SEA FIX
06.2010 - 12.2010
Light Armored Vehicle Mortar Maintenance Training Program -
General Dynamics Land Systems
Maritime Prepositioned Force Afloat Maintenance Training -
Blount Island Command
Certificate for Intro to Maintenance Support Device -
TACOM Tech Assist
Certificate for Integrated Logistics Analysis Program -
Team Coalition Forces Land Component Command
South Carolina Technical and Comprehensive Training -
Westinghouse
DuPont Maintenance Training -
Trident Technical College
High School Diploma -
Summerville High School