Ronald Stringfellow

• Performed daily cleaning and disinfecting of the cleanroom environment according to standard operating procedures.
• Monitored air particle counts, temperature, humidity and pressure levels in the cleanroom environment.
• Checked, calibrated and maintained cleanroom equipment such as laminar flow benches, HEPA filters, glove boxes and other ancillary equipment.
• Performed visual inspections of products manufactured in a controlled environment.
• Maintained sterile clean room environment by wearing clean room garments and conforming to established Good Manufacturing Process practices.

Grade logs marking out any timber breaks or defects then reading a cut list of all log lengths and cutting logs to length and writing the row and number per blueprints on the log for construction purposes with as little waste as possible throwing cut offs and junk log pieces onto a conveyer running into large dumpster. Responsible for building log packs on carts which are then wrapped banded and labeled for delivery. Once scrap dumpsters are full use heavy duty forklifts to dump into dump trailer used for firewood deliveries.

• Calibrated machines to maintain required productivity levels and adherence to quality standards.
• Troubleshot equipment breakdowns and performed preventive maintenance.
• Handled machine maintenance and lubrication.
• Tracked maintenance activities and maintained detailed records.
• Conducted preventive, corrective and predictive maintenance actions.
• Conducted preventive maintenance and troubleshooting of metering instruments.
• Followed work orders and specifications for machine and equipment replacement, repair, or maintenance.
• Installed new locks, door handles, and door closers.
• Performed electrical and mechanical repairs of production equipment to minimize downtime.
• Maintained restroom functionality by repairing leaking faucets, clogged toilets, and other equipment.
• Completed partial or full dismantling of equipment to quickly repair or replace defective components and restore functionality.
• Used problem-solving skills to alleviate issues efficiently with minimal supervision.
• Inspected and maintained equipment to keep items in top working condition.
• Monitored and documented work performance in maintenance logs in compliance with company guidelines.
• Operated varied hand and power tools to complete repairs.
• Conducted preventative maintenance on heavy equipment, such as lubrication, checking fluids and replacing worn parts.
• Analyzed blueprints and manufacturer instructions to take apart and reassemble machinery for maintenance and component replacements.
• Cleaned, lubricated and calibrated machinery components to maintain peak operating performance.
• Read and interpreted schematics, diagrams and blueprints to follow specifications in maintaining industrial machinery.
• Used hand and power tools to repair and maintain industrial machinery.
• Observed and tested operation of machinery or equipment to diagnose malfunctions using voltmeters or other testing devices.
• Replaced worn or defective parts and adjusted settings to improve performance.

• Perform preventative maintenance and repairs on various tools, machines, and equipment.
• Inspected tools for any defects or malfunctions and reported findings to management.
• Organized tool inventories according to company guidelines.
• Install and set up dies and molds.
• Remove and service dies and molds.
• Sharpen scissors and punches as needed.
• Maintained detailed records of all repairs and maintenance activities performed.
• Troubleshooting.

Line mechanic responsible for keeping lines running smoothly with little to no waste from raw materials to finish product boxed and on pallets ready for delivery.

• Performed preventive maintenance tasks, including lubrication and cleaning of machines and equipment.
• Assisted in the installation of new machinery and equipment.
• Diagnosed mechanical problems using visual inspections and test instruments.
• Replaced defective parts such as bearings, seals, gears, valves.
• Troubleshot complex electrical and mechanical issues with minimal downtime.
• Maintained accurate records of all maintenance activities performed.
• Provided technical support to production staff for machine troubleshooting needs.
• Routinely inspected plant equipment for signs of wear or malfunctioning parts.
• Adjusted machine settings according to manufacturing specifications.
• Cleaned work areas to maintain a safe environment free from debris or hazardous materials.
• Installed new systems, replacement parts and components to maintain proper operation.
• Read and interpreted equipment and work orders to properly perform required maintenance services.
• Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.
• Conducted performance and safety inspections on equipment and machinery to maintain operational baseline.
• Performed routine maintenance by inspecting drives, motors or belts.
• Dismantled machines, equipment, or devices to access and remove defective parts.
• Inspected, operated or tested machinery or equipment to diagnose machine malfunctions.
• Cleaned or lubricated shafts, bearings or other parts of machinery.

Responsible for running drilling floor and equipment and overseeing floor hands to complete daily tasks and the needs of rig manager and to insure safe drilling procedures. Responsible for making pipe connections while drilling ahead. Tripping pipe in and out of hole per needs. Making up bottom hole assembly to drill. Responsible for all motors and hydraulic equipment on the rig including boiler house and choke house.

Take care of fuel, oil and water deliveries. Responsible for inventory of tools and fluids at the rig. Responsible for drill pipe inventory and staging. Keeping lease clean and free of hazards with light plants and equipment fueled up and working properly. Assist Derrick hand working the Derrick and pump house helping to rebuild mud pumps.

• Read and interpret blueprints, schematics, drawings, and work orders to determine the specific assembly instructions.
• Follow established assembly methods and procedures to ensure product quality standards are met.
• Assemble components according to specifications using hand tools, power tools, and other equipment.
• Position parts in jigs or fixtures for fastening with bolts, screws, rivets, or other fasteners.
• Perform minor repairs on defective parts or products during the assembly process.
• Operate machines such as drill presses and saws to cut or shape parts during assembly.
• Assist in training new employees on proper safety procedures while operating machinery.

• Inspected existing roofing systems for damage and deterioration.
• Identified, measured and cut materials to size with precision tools.
• Installed underlayment, flashing, shingles and other roofing components.
• Repaired and replaced damaged sections of roofs using appropriate materials.
• Applied waterproof coatings to prevent moisture infiltration into the building structure.
• Ensured that all work was compliant with local building codes and regulations.
• Adhered to safety protocols when working at heights or with hazardous materials.
• Assisted in loading and unloading materials from delivery vehicles as required.
• Monitored weather conditions prior to beginning installation or repair work.
• Performed regular maintenance checks on equipment used in roofing applications.
• Attended training sessions related to roof installation techniques or products.
• Worked regularly at advanced heights and followed all OSHA safety protocols and procedures for fall prevention.
• Repaired and replaced roof membrane, sub roofing, sheathing and base materials.
• Mopped and poured hot asphalt and tar onto roof base while applying asphalt and tar and gravel to roof.
• Added vapor barriers or insulating materials on flat roofs.