Ryan Stout

• Inspected and tested all machinery components to ensure proper functionality.
• Replaced faulty parts such as bearings, gears, and shafts in a timely manner.
• Installed new equipment according to manufacturer specifications.
• Performed preventive maintenance on all production machines.
• Assembled industrial machines using appropriate tools and techniques.
• Aligned motors, pumps, gearboxes, conveyors and other mechanical systems.
• Adjusted machine settings to optimize performance and reduce downtime.
• Troubleshot problems with hydraulic systems and pneumatics.
• Repaired broken or worn parts by welding, grinding, machining or fabricating replacement parts as needed.
• Reassembled machines after repair work was completed.
• Calibrated instruments such as pressure gauges and thermometers for accuracy of readings.
• Fabricated spare parts from raw materials such as steel bars or plates.
• Ensured safety regulations were followed while performing tasks.
• Ran tests on newly installed machines to verify their optimal functioning.
• Monitored the operation of machinery during production runs.
• Removed old equipment from facilities in an efficient manner.
• Disassembled defective machines for further inspection and repairs.
• Installed electrical wiring for new equipment according to blueprints provided by engineers.
• Lubricated moving parts of machinery at regular intervals to prevent breakdowns.
• Maintained accurate records of all repairs performed on machinery.
• Assisted in troubleshooting complex issues with automated processes or robotics systems.
• Repaired and lubricated machines and equipment and assembled and installed equipment using hand tools and power tools.
• Completed routine preventive maintenance on heavy equipment, minimizing machinery downtime.
• Maintained clean and environmentally safe work area.
• Moved heavy machinery and equipment using hoists, dollies, rollers, and trucks.
• Signaled crane operator to lower basic assembly units to bedplate and aligned unit to centerline.
• Used and maintained shop equipment to prevent downtime and reduce safety hazards.
• Read diagrams and schematic drawings to determine work procedures.
• Dismantled machines, categorized parts by carefully documenting components and moved equipment into storage.
• Installed stationary industrial machinery and mechanical equipment following layout plans.
• Reviewed equipment and daily job specifications, drawings, and blueprints to properly and safely assemble machinery.
• Used rigging, hoists and equipment to move heavy machinery between locations and complete installations.
• Assembled machines and bolted, welded or riveted components to foundation or other structures using hand tools and power tools.
• Completed corrective and predictive maintenance on industrial machinery to replace worn parts and prevent breakages.
• Assembled moving parts and sub-assemblies and adjusted, leveled and tensioned machines and components.
• Installed machines in industrial and construction settings and tested to confirm proper working condition.
• Inspected and completed troubleshooting to repair machinery.
• Read blueprints and sketches to fabricate equipment, make modifications, and establish work procedures.
• Observed required safety measures when using blowtorches, wrenches and forklifts to maintain high standards.
• Adjusted machinery and repaired or replaced defective parts to save company on repair fees.
• Inspected operating safety devices for proper functionality after repairs, installations, modifications and installations.

• Washed wide range of vehicles each day.
• Vacuumed vehicle interiors to remove loose dirt and debris.
• Inspected vehicle to verify pristine appearance for customer.
• Used cleaning, protective and restorative agents to maintain and enhance appearance of vehicles.
• Cleaned upholstery, rugs and other surfaces with cleaning agents to remove dirt and debris.
• Waxed exterior of vehicles, removed compound with soft cloth and buffed to brilliant shine.
• Disassembled and reassembled machines or equipment or removed and reattached vehicle parts or trim.
• Monitored operation of cleaning machines and stopped machines or notified supervisors when malfunctions occurred.
• Rinsed objects and placed on drying racks or used cloths, squeegees or air compressors to dry surfaces.
• Swept, shoveled or vacuumed debris or salvageable scrap into containers and removed from work areas.
• Drove vehicles to or from workshops or customer workplaces or homes.
• Inspected parts, equipment or vehicles for cleanliness and damage.
• Maintained inventories of cleaning supplies.
• Applied waxes or masking materials to vehicles to preserve, protect or restore color or condition.
• Cleaned and polished vehicle windows.

• Preparation of job site and laying out of needed materials to help job run safe, smoothly, and efficiently.
• Digging, backfilling, and leveling of connections of drainage tile.
• Use of a transit and level to ensure grade is established and maintained for proper drainage and watershed.
• Maintenance and upkeep on all equipment to insure safety and continued longevity of equipment needed for the particular project.
• Practiced and maintained safety to insure a safe and productive worksite for both myself and others.
• Completed variety of physical labor tasks.
• Understood and followed oral and written directions.
• Met company and OSHA safety guidelines for work site operations to minimize worker risk.
• Used picks and shovels to dig, spread and level dirt and gravel.
• Loaded and unloaded daily material shipments, keeping products organized and secure to prevent damage and optimize handling.
• Read plans, instructions or specifications to determine work activities.
• Cut materials into specified sizes for installation using tile cutters and power saws.
• Prepared items for transportation installing bracing, padding and strapping to prevent damage.
• Utilized two-way radios and hand signals to coordinate communication between equipment operators.
• Joined, wrapped, sealed and bedded sections of underground pipe and pipe penetrations.
• Performed physical activities requiring heavy lifting, walking and standing for long periods of time.

• Received, examined and reshelved returned parts.
• Performed scheduled inventory audits per to verify accuracy and product availability.
• Reduced process lags, managing daily parts operations such as fulfilling service requests, generating orders, tracking inventory and maintaining profit margins.
• Controlled daily parts program activities to improve sales and inventory management.
• Maintained inventory accuracy by counting stock-on-hand and reconciling discrepancies.
• Helped and trained if needed fellow employees under me understand how to build needed parts and complete the task safely and efficiently.
• Operated a fork truck to stock and move parts to designated areas of production.
• Maintained a safe and clean work area to insure the safety of my fellow workers and taught these same techniques to insure our team was efficient and more so safe.

• Installed structures or fixtures using hand or power tools per plan drawings.
• Assisted electrical, plumbing and carpentry teams by completing basic and semi-skilled work.
• Maintained clean, safe working environment by removing debris from job site prior to shift completion.
• Read plans, instructions or specifications to determine work activities.
• Met company and OSHA safety guidelines for work site operations to minimize worker risk.
• Built and disassembled scaffolds, bracing and barricades to assist in vertical construction activities.
• Used picks and shovels to dig, spread and level dirt and gravel.
• Used trowels and floats to smooth and finish freshly poured cement or concrete.
• Collected and removed debris from work sites to maintain team productivity and minimize safety hazards.
• Operated overhead lifts to move heavy and bulky work materials.
• Used laser measuring tools to calculate lengths, widths and heights.
• Utilized two-way radios and hand signals to coordinate communication between equipment operators.
• Signaled operators of construction equipment to facilitate alignment, movement and adjustment of machinery.
• Used wheelbarrow to move debris and material to designated areas on jobsite.
• Logged inventory to track supply counts, organize equipment and gather important materials.
• Performed lock-out-tag-out procedures on equipment prior to service work to promote workplace safety.
• Controlled traffic to protect work site integrity, crew safety and general public welfare.
• Performed demanding physical work over extended periods and modeled positive attitude.
• Cleaned or prepared construction sites to eliminate hazards.
• Understood how to operate and maintain job site equipment safely and for maximum productivity.
• Displayed high standards for quality workmanship and routinely double-checked work.
• Learned and mastered skilled trade specialties under guidance of expert mentors.
• Loaded materials and tools into vehicles and unloaded upon arrival at jobsites.
• Gained independent working skills and guided and mentored less experienced team members.
• Dug ditches or trenches, backfilled excavations or compacted and leveled earth to grade specifications.
• Worked productively as lead or helping team member to drive customer satisfaction.
• Operated equipment with strong focus on safety and ground communication.
• Assisted with diverse construction challenges to help team and customer.
• Lubricated, cleaned or repaired machinery or equipment.
• Loaded or unloaded building materials to distribute machinery or tools.
• Performed site activities required of green-certified construction practices.
• Demonstrated best safety practices working at heights and lifting various objects.
• Controlled traffic passing near, in or around work zones.
• Positioned, aligned or sealed concrete wall sections or pipes.
• Inspected sites before and after construction projects.
• Tended pumps, compressors or generators to provide power or heat or move materials.
• Installed sewer, water or storm drain pipes using pipe-laying machinery or laser guidance equipment.
• Measured, marked or recorded openings or distances to construction layout areas.
• Signaled equipment operators to facilitate alignment, movement or adjustment of machinery.
• Coordinated phases of construction projects from inception to completion.

• Installed structures or fixtures using hand or power tools per plan drawings.
• Assisted electrical, plumbing and carpentry teams by completing basic and semi-skilled work.
• Maintained clean, safe working environment by removing debris from job site prior to shift completion.
• Read plans, instructions or specifications to determine work activities.
• Met company and OSHA safety guidelines for work site operations to minimize worker risk.
• Built and disassembled scaffolds, bracing and barricades to assist in vertical construction activities.
• Used picks and shovels to dig, spread and level dirt and gravel.
• Used trowels and floats to smooth and finish freshly poured cement or concrete.
• Collected and removed debris from work sites to maintain team productivity and minimize safety hazards.
• Operated overhead lifts to move heavy and bulky work materials.
• Used laser measuring tools to calculate lengths, widths and heights.
• Utilized two-way radios and hand signals to coordinate communication between equipment operators.
• Signaled operators of construction equipment to facilitate alignment, movement and adjustment of machinery.
• Used wheelbarrow to move debris and material to designated areas on jobsite.
• Logged inventory to track supply counts, organize equipment and gather important materials.
• Performed lock-out-tag-out procedures on equipment prior to service work to promote workplace safety.
• Controlled traffic to protect work site integrity, crew safety and general public welfare.
• Performed demanding physical work over extended periods and modeled positive attitude.
• Cleaned or prepared construction sites to eliminate hazards.
• Understood how to operate and maintain job site equipment safely and for maximum productivity.
• Displayed high standards for quality workmanship and routinely double-checked work.
• Learned and mastered skilled trade specialties under guidance of expert mentors.
• Loaded materials and tools into vehicles and unloaded upon arrival at jobsites.
• Gained independent working skills and guided and mentored less experienced team members.
• Dug ditches or trenches, backfilled excavations or compacted and leveled earth to grade specifications.
• Worked productively as lead or helping team member to drive customer satisfaction.
• Operated equipment with strong focus on safety and ground communication.
• Assisted with diverse construction challenges to help team and customer.
• Lubricated, cleaned or repaired machinery or equipment.
• Loaded or unloaded building materials to distribute machinery or tools.
• Demonstrated best safety practices working at heights and lifting various objects.
• Controlled traffic passing near, in or around work zones.
• Positioned, aligned or sealed concrete wall sections or pipes.
• Inspected sites before and after construction projects.
• Tended pumps, compressors or generators to provide power or heat or move materials.
• Installed sewer, water or storm drain pipes using pipe-laying machinery or laser guidance equipment.
• Measured, marked or recorded openings or distances to construction layout areas.
• Signaled equipment operators to facilitate alignment, movement or adjustment of machinery.
• Coordinated phases of construction projects from inception to completion.

• Preparation of job site and laying out of needed materials to help job run safe, smoothly, and efficiently.
• Digging, backfilling, and leveling of connections of drainage tile.
• Use of a transit and level to ensure grade is established and maintained for proper drainage and watersheding.
• Preformed maintenance and upkeep of all equipment to insure safety and continued longevity of equipment needed for the particular project.
• Practiced and maintained safety to ensure a safe and productive worksite for both myself and others.
• Performed physical activities requiring heavy lifting, walking and standing for long periods of time.
• Completed variety of physical labor tasks.
• Understood and followed oral and written directions.
• Maintained clean, safe working environment by removing debris from job site prior to shift completion.
• Collaborated with team members to complete assigned tasks and meet tight deadlines.
• Met company and OSHA safety guidelines for work site operations to minimize worker risk.
• Used picks and shovels to dig, spread and level dirt and gravel.
• Loaded and unloaded daily material shipments, keeping products organized and secure to prevent damage and optimize handling.
• Read plans, instructions or specifications to determine work activities.
• Performed regular servicing and preventive maintenance on assigned equipment.
• Lubricated and cleaned machinery and tools.
• Mixed, poured, and spread concrete, asphalt gravel and other materials.
• Cut materials into specified sizes for installation using tile cutters and power saws.
• Prepared items for transportation installing bracing, padding and strapping to prevent damage.
• Utilized two-way radios and hand signals to coordinate communication between equipment operators.
• Joined, wrapped, sealed and bedded sections of underground pipe and pipe penetrations.

• Delegated tasks to multiple employees while maintaining efficient workplace.
• Kept records of employees' attendance and working hours for accurate calculation of billable cycle.
• Read and interpreted work order specifications and information to plan, schedule and carry out jobs effectively.
• Enforced company policies, answered coworkers' questions and trained new personnel.
• Observed and monitored utilization of equipment.
• Assigned tasks to employees and monitored productivity, performance and task completion.
• Directed and coordinated production activities, encouraging employees to meet specifications.
• Set up and adjusted machines and equipment to produce pre-determined results.
• Conducted training in equipment operations and safety procedures, briefing employees of hazards associated with work.
• Performed minor equipment repairs to keep jobs on task and notified maintenance department of major machinery failures.
• Conferred with management and subordinates to resolve problems or complaints.
• Recommended opportunities for growth and advancement to motivate employees.
• Ordered equipment parts and repair services during equipment breakdown to avoid further delays.
• Read blueprints and produced the product needed for production or delegated the task as needed.
• Preformed maintenance on various machines and or equipment to insure production ran smoothly and safely.
• Oversaw a clean and safe workplace and directed others in similar tasks dealing with general safety and or housekeeping.

31 uniform training/schooling for U.S. Army (signal support system/tactical satellite communication)