Salvador Lucio
Harlingen ,TX
Summary
Organized and dependable candidate successful at managing multiple priorities with a positive attitude. Willingness to take on added responsibilities to meet team goals.
Overview
10
10
years of professional experience
Work History
Pipefitter/Structural Fitter
SpaceX
01.2021 - Current
- Taking on the role as a POC to assist supervision run delegate jobs to Contractors to complete projects .
- Tested For 1/4" max, GTAW, Unlimited SMAW, and Plate and pipe 1" OD and over in any position WELDER STENCIAL IS SGF-119
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Promoted a safe work environment by adhering to company safety policies and procedures at all times during pipefitting operations.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
- Facilitated smooth project execution by interpreting isometric drawings for accurate installation or modification of piping systems.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
- Contributed to overall company success by maintaining a strong work ethic, adaptability, and commitment to delivering exceptional service on all projects undertaken.
- Supported fellow team members in their tasks, fostering a collaborative work environment that prioritized both safety and efficiency.
- Maintained high-quality standards through consistent attention to detail while fitting pipes according to building code requirements.
- Consistently met client expectations through timely completion of projects while maintaining high levels of quality control checks throughout the process.
- Supported team efficiency through clear communication regarding progress updates and potential issues during the course of projects.
- Assisted in achieving project deadlines through effective organization of work assignments and prioritization of tasks based on urgency.
- Collaborated effectively with supervisors to ensure that all necessary permits were obtained before commencing work on new projects.
- Optimized workflow by organizing tools and materials beforehand, setting stage for efficient task execution.
- Reduced material waste by accurately measuring and planning pipe routes, contributing to cost savings.
- Delivered custom fabrication projects within tight deadlines, utilizing precise cutting and welding techniques to meet specific requirements.
- Prevented project delays, skillfully navigating last-minute changes to designs or schedules with adaptability.
- Enhanced team performance with strong leadership in collaborative projects, setting clear goals and expectations.
- Fabricated components and supports.
- Continuously advanced skill set by attending training programs, staying updated on industry trends, and acquiring new certifications as necessary.
- Supported continuous improvement initiatives by providing feedback on best practices for executing fitting tasks more efficiently.
- Enhanced project efficiency by fabricating and assembling steel structures according to specified plans.
- Assisted crane operators in safely rigging loads for transport ensuring minimal disruptions onsite.
- Operated [Number]-ton overhead crane to insert plates and parts.
- Maintained quality control with thorough inspections of welded joints and structural connections.
- Reduced rework needs by conducting dimensional checks on materials before final assembly activities commenced.
- Strengthened team dynamics through active participation in group meetings, sharing knowledge, and assisting colleagues as needed.
- Tacked weld clips and brackets in place for permanent welding.
- Resolved issues by effectively communicating with engineers to clarify design specifications when needed.
- Upheld industry standards while working at heights or confined spaces using appropriate fall protection measures.
- Demonstrated adaptability in working across diverse industries such as commercial construction, shipbuilding, oil refineries, power plants with consistent attention to detail.
- Increased project completion rate by effectively prioritizing and managing multiple tasks simultaneously.
- Optimized work performance through regular maintenance of tools and equipment for uninterrupted operations.
- Fabricated, assembled, installed and maintained piping systems.
- Laid out, positioned, aligned and secured parts for welding and bolt-up.
- Corresponded with supervisor to identify and carry out projects, implementing repairs, expansions and new installations according to customer requirements.
- Fabricated and installed various types of supports for piping systems and implemented proper hanger spacing.
- Recorded center to center measurements of area requiring field run systems and fabricated system based on measurements taken, applying specialized fit up techniques as appropriate.
Pipefitter Leadman
World Wide Performance Group
11.2019 - 01.2021
- Fabricated, assembled, installed and maintained piping systems.
- Fabricated and installed screw pipe, socket weld pipe and stainless steel tubing.
- Threaded pipes using piping machines.
- Read and interpreted blueprints, sketches and specifications and set up [Type] machines prior to beginning work.
- Supervised 2 apprentices, answering questions and providing feedback on work.
- Identified issues and brought to job foreman to be resolved.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Utilized welding equipment and other hand tools with utmost safety and efficiency.
- Employed skills in cementing and welding to finalize high-quality piping systems.
- Drilled holed into parts of existing structures to complete piping
- Plumbing systems with correct piping, fittings and valves.
- Fabricated piping pieces and components in line with design specifications for each system.
- Located and repaired or replaced worn and broken components to enhance system functionality and durability.
- Used precision measuring instruments, templates, and fixtures to measure dimensions of finished work pieces.
- Collaborated with other trades on-site for seamless integration of piping systems in large-scale construction projects.
- Reduced material wastage by accurately measuring, cutting, threading, and bending pipes according to project specifications.
- Achieved project deadlines through diligent task prioritization and efficient coordination among team members.
Pipe Foreman
Mcderrmott
02.2019 - 08.2019
- Liaised between field engineers and trade workers to ensure construction projects complied with drawings and specifications.
- Reviewed and approved employee time reporting.
- Assembled and secured pipes, tubes, fittings and related equipment according to project specifications.
- Thoroughly inspected pipes and piping systems to assess quality and condition.
- Read and interpreted blueprints and schematics to determine locations, quantities and sizes of materials required.
- Operated wide variety of equipment including power saws, sanders, grinders, cranes drill press, forklift and basic hand tools.
- Reviewed plans from architects and consulted with clients to gain deeper understanding of project plans, constraints and objectives.
- Assessed engineering documentation to determine order of construction operations.
- Followed standards and procedures to maintain safe work environment.
- Maintained compliance with company standards to perform all maintenance activities.
- Used hoists and cranes to lift work pieces to machine.
- Communicated operational issues and changes to supervisor on regular basis.
- Enhanced project efficiency by implementing effective pipe installation and repair strategies.
- Increased crew productivity through regular training sessions on safety protocols and industry best practices.
- Delivered exceptional results under tight deadlines by prioritizing tasks, delegating responsibilities, and overseeing all aspects of pipe installation projects from start to finish.
Pipefitter Leadman
Mcderrmott
03.2018 - 01.2019
- Followed safe work practices, which included fall protection and personal protective equipment.
- Threaded pipes using piping machines.
- Fabricated and installed screw pipe, socket weld pipe and stainless steel tubing.
- Supervised [Number] apprentices, answering questions and providing feedback on work.
- Utilized welding equipment and other hand tools with utmost safety and efficiency.
- Identified issues and brought to job foreman to be resolved.
- Fabricated, assembled, installed and maintained piping systems.
- Fabricated piping pieces and components in line with design specifications for each system.
- Conducted thorough inspects and tests of previously installed systems to locate and correct faults.
Pipefitter Leadman
Sauls Barry
01.2018 - 03.2018
- Followed safe work practices, which included fall protection and personal protective equipment.
- Threaded pipes using piping machines.
- Fabricated and installed screw pipe, socket weld pipe and stainless steel tubing.
- Supervised [Number] apprentices, answering questions and providing feedback on work.
- Coordinated movement of materials and equipment to job sites.
- Identified issues and brought to job foreman to be resolved.
- Fabricated, assembled, installed and maintained piping systems.
- Installed piping for plumbing systems for domestic and HVAC lines.
- Fabricated piping pieces and components in line with design specifications for each system.
Pipefitter
Sauls Burry
10.2017 - 12.2017
- Followed safe work practices, which included fall protection and personal protective equipment.
- Fabricated and installed screw pipe, socket weld pipe and stainless steel tubing.
- Threaded pipes using piping machines.
- Utilized welding equipment and other hand tools with utmost safety and efficiency.
- Coordinated movement of materials and equipment to job sites.
- Fabricated, assembled, installed and maintained piping systems.
- Identified issues and brought to job foreman to be resolved.
Pipe Fitter
Avs
01.2017 - 09.2017
- Identified issues and brought to job foreman to be resolved.
- Coordinated movement of materials and equipment to job sites.
- Threaded pipes using piping machines.
- Installed piping for plumbing systems for domestic and HVAC lines.
- Fabricated, assembled, installed and maintained piping systems.
- Fabricated and installed screw pipe, socket weld pipe and stainless steel tubing.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Conducted thorough inspects and tests of previously installed systems to locate and correct faults.
- Employed skills in cementing and welding to finalize high-quality piping systems.
- Located and repaired or replaced worn and broken components to enhance system functionality and durability.
- Fabricated piping pieces and components in line with design specifications for each system.
Pipe Fitter
Saulsburry
03.2016 - 06.2016
- Fabricated, assembled, installed and maintained piping systems.
- Fabricated and installed screw pipe, socket weld pipe and stainless steel tubing.
- Utilized welding equipment and other hand tools with utmost safety and efficiency.
- Read and interpreted blueprints, sketches and specifications and set up machines prior to beginning work.
- Threaded pipes using piping machines.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Identified issues and brought to job foreman to be resolved.
- Fabricated piping pieces and components in line with design specifications for each system.
Pipefitter
Ntact Construcción
08.2014 - 11.2015
- Fabricated and installed screw pipe, socket weld pipe and stainless steel tubing.
- Utilized welding equipment and other hand tools with utmost safety and efficiency.
- Coordinated movement of materials and equipment to job sites.
- Installed piping for plumbing systems for domestic and HVAC lines.
- Identified issues and brought to job foreman to be resolved.
- Fabricated, assembled, installed and maintained piping systems.
- Threaded pipes using piping machines.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Conducted thorough inspects and tests of previously installed systems to locate and correct faults.
- Assessed engineering documentation to determine order of construction operations.
Education
High School Degree -
Harlingen High School
Harlingen 05.2014
Skills
- Materials ordering
- Pipefitting
- Welding
- Installation and maintenance
- Preventive and reparative maintenance
- Team oversight
- Blueprints and specifications
- Piping specifications
- Blueprints and schematics
- Safety and compliance
- New construction and renovation
Timeline
Pipefitter/Structural Fitter
SpaceX
01.2021 - Current
Pipefitter Leadman
World Wide Performance Group
11.2019 - 01.2021
Pipe Foreman
Mcderrmott
02.2019 - 08.2019
Pipefitter Leadman
Mcderrmott
03.2018 - 01.2019
Pipefitter Leadman
Sauls Barry
01.2018 - 03.2018
Pipefitter
Sauls Burry
10.2017 - 12.2017
Pipe Fitter
Avs
01.2017 - 09.2017
Pipe Fitter
Saulsburry
03.2016 - 06.2016
Pipefitter
Ntact Construcción
08.2014 - 11.2015
High School Degree -
Harlingen High School
Similar Profiles
Derrek ShipeDerrek Shipe
Integration Technician - Dragon at SpaceXIntegration Technician - Dragon at SpaceX
Sergio SandovalSergio Sandoval
CNC Machinist/Metal Spinner at SpaceXCNC Machinist/Metal Spinner at SpaceX
Catherine Oliva-CatalanCatherine Oliva-Catalan
Dining Room Attendant at SpaceXDining Room Attendant at SpaceX