Sammy T. Pina
Bosque
Summary
Dynamic individual with hands-on experience in Electrical Installation, reading schematics and talent for navigating challenges. Brings strong problem-solving skills and proactive approach to new tasks. Known for adaptability, creativity, and results-oriented mindset. Committed to making meaningful contributions and advancing organizational goals.
Overview
11
11
years of professional experience
1
1
Certification
Work History
Electrical Field Engineer
The Industrial Company
Florence, AZ
12.2023 - Current
- Established a reputation as a reliable resource for colleagues seeking advice on complex technical issues or innovative solutions in the field.
- Performed comprehensive site surveys to identify potential challenges before starting a project, reducing unexpected delays.
- Mentored junior engineers, providing guidance on best practices for fieldwork and problem-solving techniques.
- Reduced system downtime with thorough equipment testing and maintenance.
- Spearheaded quality control initiatives that resulted in fewer errors during installations or repairs, saving both time and resources for the company and clients alike.
- Ensured compliance with industry standards by staying updated on current codes, regulations, and best practices.
- Inspected completed installations to observe operations and verify conformance to design and equipment specifications.
- Monitored installation and operations to consistently meet rigorous customer requirements.
Electrical Estimator
The Industrial Company
Lone Tree, CO
06.2023 - 11.2023
- Contributed to successful project bids by accurately estimating labor hours, materials costs, and overall timelines for completion.
- Supported cost control efforts by assisting in material take-offs and estimating tasks as needed.
- Reduced material waste by accurately estimating required quantities for each job, minimizing excess materials.
- Used computer programs such as MC2, Bluebeam and Excel to assist with the estimating of future potential projects.
- Streamlined communications between departments through regular progress reports and updates on key performance metrics related to estimating activities.
Industrial Electrical Foreman
The Industrial Company
Lovelock, NV
04.2022 - 06.2023
- Contributed to a positive organizational culture by fostering teamwork among crew members while holding everyone accountable for their performance at all times.
- Ensured compliance with local, state, and federal regulations by staying up-to-date on industry news and changes in legislation affecting industrial electrical work.
- Connected wires to circuit breakers, transformers, and other components.
- Maximized team productivity through continuous training on new technologies, industry best practices, and safety procedures.
- Installed, maintained and repaired electrical wiring, controls and lighting systems.
- Tested circuit continuity to determine electrical compatibility and component safety.
Electrical Foreman
The Industrial Company
Gregory, Texas
10.2020 - 07.2021
- Read and understood the schematics and work packs for the area we work completing the work in, estimating the material and footage we needed to complete the work from the blueprints.
- Monitored employee performance and adherence to job specifications to maintain quality standards and high client satisfaction.
- Facilitated work site safety by applying knowledge of safety protocol and awareness of potential hazards.
- Streamlined operations by managing a team of electricians, assigning tasks, and ensuring timely completion of projects.
- Monitored employees to enforce safety and work performance standards.
- Supervised installation of channel tray, cable tray, wire pulling to instruments from junction boxes, and terminations of the wires according to pull and termination schedules.
- Evaluated job site and project specifications to determine supply needs, coordinating availability of equipment and materials.
- Supported company objectives by consistently meeting deadlines without compromising quality or safety standards in the process.
- Mentored junior electricians to develop their skills through hands-on training sessions and regular performance evaluations.
- Collaborated with other trades professionals to coordinate efforts across multiple disciplines during large-scale construction projects.
Electrician
The Industrial Company
Gregory, Texas
09.2019 - 10.2020
- Performed 13.8 kv and 35 kv stress cone terminations inside link boxes and transformers.
- All terminations were hipot tested and passed.
- Performed instrumentation terminations inside panels and inside instruments according to the termination schedules
- Pulled cable according to the pull schedule, phoned the cables to ensure they were labeled correctly and in the correct area, and megged the cable to ensure that the cable was not damaged during the pull.
- Installed busduct and busbars from transformers to substation openings.
- Followed all safety procedures and LOTO when working inside of a live substation, tested before touching anywhere to verify that it is not energized before working inside of a panel or junction boxes.
- Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
- Mentored apprentice electricians in proper installation techniques, safety protocols, and troubleshooting methods to enhance their skill sets.
- Coordinated with other tradespeople seamlessly during large-scale installations or renovations to ensure smooth project progressions.
Electrician
Dilling Group Inc.
La Porte, Texas
11.2018 - 08.2019
- Performed 13.8 kv terminations from switchgear to plant substation. Terminated 480V motors, instruments and PLC cabinets.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters and voltmeters.
- Increased productivity by effectively managing multiple projects simultaneously while maintaining high-quality workmanship.
- Enhanced customer satisfaction by providing timely and effective troubleshooting for electrical issues, leading to minimal disruption.
- Troubleshot and repaired malfunctioning systems and components.
- Megged cables/motors to ensure the insulation of the cables and/or the windings of the motor were in good working conditions.
- Assisted Start Up and Commissioning with rewiring panels and relays when they were not responding correctly.
Electrician
Higdon Construction
Houston, Texas
04.2018 - 11.2018
- Performing terminations on MOV's, motors, UPS panels, 480 panels, and PLC's according to termination schedules and one line schematics.
- Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
- Operated manlifts to access higher work platforms when not easily accessible from the ground or a ladder.
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- Installed and wired electrical transformers, service panels, and circuit breakers.
- Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
- Stored and maintained power tools and equipment for each job.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
- Increased productivity by effectively managing multiple projects simultaneously while maintaining high-quality workmanship.
Electrician
The Industrial Company
Thompsons, Texas
01.2018 - 04.2018
- Replaced and repaired lighting fixtures and electrical control and distribution equipment.
- Reterminated panels and junctions boxes after pulling them back to complete work that could not be done with the flex and wires in the area.
- Examined electrical units for loose connections and broken insulation.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
- Operated manlifts to access elevated work areas.
- Assisted insulation, pipe, and mechanical disciplines in various tasks including installing insulation metal and blankets, flying and fitting pipe and installing compressor motor components
- Welded temporary structures to install junction boxes to be installed.
- Worked 7 days a week, 12 hour days to meet a strict scheduling deadline.
Electrical Apprentice
The Industrial Company
Convent, LA
03.2017 - 01.2018
- Analyzing and interpreting engineer prints to install and bend conduit accordingly.
- Worked under supervision of journeyman electrician to learn trade and develop electrical knowledge.
- Coordinating with the journeyman and foreman to meet scheduling deadlines.
- Provided safety training for new hires, and attended safety and productivity meetings daily.
- Terminated wiring and connected circuits with correct techniques.
- Contributed to a positive work environment by maintaining professionalism and adhering to company policies at all times.
- Supported project success by assisting with wiring layouts, conduit bending, circuit connections, and other essential tasks as directed by senior electricians.
Electrical Apprentice
The Industrial Company, Grand River Energy Center
Chouteau, OK
12.2016 - 02.2017
- Performed terminations in motors, programmable logic controller cabinets, and the motor control center
- Followed all safety procedures and guidelines to promote safety while working on electrical systems.
- Testing cable insulation and motor functionality with a megger to ensure safe operation of startup
- Supported project success by assisting with wiring layouts, conduit bending, circuit connections, and other essential tasks as directed by senior electricians.
- Developed practical skills by actively participating in hands-on training sessions under the guidance of experienced electricians.
Electrical Apprentice
Petra Nova Carbon Capture
Thompsons, TX
09.2014 - 12.2016
- Developed professional relationships with the heat trace vendor to receive and install heat trace according to vendor specifications.
- Displayed quality standards in terminations and installation of cable and conduit.
- Developed safety and productivity goals through weekly meetings with field engineers.
- Developed practical skills by actively participating in hands-on training sessions under the guidance of experienced electricians.
- Exceeded expectations for apprenticeship requirements, completing assigned tasks accurately and efficiently under minimal supervision.
- Spliced, joined and connected wire to accurately install new electrical systems.
Education
Electrical License - Electrical Installation
The Industrial Company Apprenticeship Program
Steamboat Springs, CO04-2023
No Degree - High School
Albert M. Lowry High School
Canyon, Winnemucca01.2010
Skills
- Installation scheduling
- Vendor engagement
- Wiring installation
- Schematics interpretation
- Electrical safety compliance
- Electrical troubleshooting
- Equipment installation
- Field testing
- Team leadership
- Wiring schematics
Accomplishments
- Instrumentation Level 1 - NCCER.
- Electrical Apprentice Level 3 - NCCER.
- TIG Welding - Champions Welding Academy.
Certification
- Colorado Electrical License
Timeline
Electrical Field Engineer
The Industrial Company
12.2023 - Current
Electrical Estimator
The Industrial Company
06.2023 - 11.2023
Industrial Electrical Foreman
The Industrial Company
04.2022 - 06.2023
Electrical Foreman
The Industrial Company
10.2020 - 07.2021
Electrician
The Industrial Company
09.2019 - 10.2020
Electrician
Dilling Group Inc.
11.2018 - 08.2019
Electrician
Higdon Construction
04.2018 - 11.2018
Electrician
The Industrial Company
01.2018 - 04.2018
Electrical Apprentice
The Industrial Company
03.2017 - 01.2018
Electrical Apprentice
The Industrial Company, Grand River Energy Center
12.2016 - 02.2017
Electrical Apprentice
Petra Nova Carbon Capture
09.2014 - 12.2016
Electrical License - Electrical Installation
The Industrial Company Apprenticeship Program
No Degree - High School
Albert M. Lowry High School