SAMUEL GABLE

• Collaborated with team members to ensure the contractor is performing tasks under appropriate standards and procedures.
• Coordinated with regulatory agencies during projects.
• Reviewed inspection reports for accuracy and completeness before submission.
• Met with employees to discuss job performance and offered suggestions to improve efficiency.
• Provided guidance on how best to handle difficult situations encountered during the project.
• Collaborated with other departments within the organization to ensure that all inspection requirements are met.
• Assessed the performance of inspectors and provided feedback for improvement.
• Maintained records of all inspection results and documented any discrepancies found during inspections.
• Communicated effectively with construction manager/ project manager about any changes needed on the project.
• Ensured that all equipment used for inspections is properly calibrated before use.
• Identified potential hazards or risks associated with various processes inspected.
• I perform QC over the contractor with the sandblasting and coating process of ARO and FBE pipe using a variety of two-part epoxies. When I am not overseeing coating being done, I oversee HDD operations, I QC basic utility work such as stripping topsoil, segregating soils, digging, backfilling, and the stringing, skidding up of pipe on skids, as well as pigging operations, and pressure testing. I am also versed in shooting in GPS locations using Trimble. I am knowledgeable when it comes to distribution work in the road but all aspects of pipeline as well including transmission.
• Verified that all welders have the necessary qualifications prior to production welding.
• Maintained accurate records of all inspections conducted within the facility.
• Ensured that safety guidelines were followed during welding operations.
• Reviewed blueprints, drawings, and welding procedures to verify conformance with applicable codes and standards.
• Documented inspection results in accordance with company policies and procedures.
• Conducted visual inspections and non-destructive testing of welds to ensure code compliance.
• Inspected welding operations for adherence to quality control standards.
• Conducted inspections of surface preparation applied to steel pipe.
• Performed profile readings after sandblasting to determine correct anchor profile with blast media being used.
• Verified environmental parameters in specification to prepare for blasting and coating activities.
• Evaluated quality of paints, managed mixes and checked coverage for compliance with job specifications.
• Documented inspection results and maintained detailed records for compliance reporting.
• Pressure testing newly installed pipelines in accordance with the gas company and the contractor.
• Conducted pipeline pigging operations to ensure system integrity and efficiency.
• Supervised HDD processes to maintain safety and quality standards.
• Executed GPS data collection using Trimble equipment for accurate site mapping.
• Reviewed drawings and blueprints to complete inspections at designated levels.
• Identified production concerns and collaborated with supervisors to develop solutions, ensuring project standards were met.
• Filled out and submitted logs and paperwork on time.
• Generated detailed reports outlining inspection and testing results.
• Documented inspection findings in detailed reports, highlighting performance metrics, quality assessments, and defect rates.
• Evaluated construction quality and company policies.
• Worked closely with team members to deliver project requirements, develop solutions and meet deadlines.
• Communicated project progress, site challenges, and labor status to supervisors, facilitating informed decision-making.
• Established and enforced procedures and work standards, promoting team performance and safety.
• Kept detailed progress records to hit strict deadlines and adjust plans.

• Delegated tasks and monitored progress to ensure timely completion of daily work assignments.
• Reviewed documentation and safety materials and implemented work site procedures.
• Managed sites by focusing on safety, operations and productivity.
• Tracked and reported units and labor hours prior to submission of timecards.
• Planned and delegated work to meet planned project and production goals.
• Ensured compliance with safety, productivity, and quality standards on every job site.
• Communicated positively with employees, demonstrating high company standards and mitigating issues immediately.
• Led worksite preparation and project planning for smoothly run jobs.
• Worked closely with team members to deliver project requirements, develop solutions and meet deadlines.
• Motivated and encouraged team members to communicate more openly and constructively with each other.
• Accomplished tasks according to schedule, assisting team members to meet deadlines.
• Cleaned and lubricated equipment on regular schedules to maintain life of machinery and achieve consistent operations.
• Conducted daily JSA meetings to clarify tasks and responsibilities.
• Managed daily reports and time to be sent into the HR department.
• Talked with the inspector to ensure that our daily reports line up, having the same number of pay items listed.
• Observe the process of readying the ROW for access with machines and work trucks by installing truck mats.
• Observe the process of bridging over existing lines and across creeks with timber bridge mats.
• Install goal posts and flagging under power lines.
• Oversee a crew of 4 to 6 employees in the process of anomaly digs.
• Took photos to document site images.
• Laid out and fielded staked utility lines and other features, facilitating accurate measurements.
• Located and determined depths of underground facilities and lines using locating equipment.
• Oversaw the excavation process by ensuring operator keeps his 2' distance on top and the sides of the existing pipe.
• Observed potential hazards and obstructions, including utility lines, equipment, workers and falling objects, maximizing safe working conditions.
• Observed hand signals, grade stakes and markings to operate machines within performance specifications.
• Assigned and supervised team activities while providing constructive feedback to maintain project momentum.
• Maneuvered trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
• Adhered to all workplace safety standards and OSHA regulations.
• Installed type A and B sleeves over the existing pipeline.
• Observed the backfill operations after the coating process in done, backfilling and padding dirt in 1' lifts to ensure proper compaction.
• Observed the seeding and fertilizing after the backfill operations. Final stabilization of ROW by blowing straw over newly seeded area.
• After job is complete, we started on the clean up of the ROW, removing all equipment and everything brought in to do the job.
• Kept up with daily notes of what my days consist of.
• Organized daily tasks to enhance productivity.

At the position I held, I performed QC over the contractor with the sandblasting and coating process of ARO and FBE pipe using a variety of two-part epoxies, installation of Canusa Scar-Guard over the ARO pipe before a drill or bore section is pulled, and the painting of above ground fabrications using Sherwin Williams paints. When I am not overseeing coating being done, I QC basic utility work such as stripping top soil, segregating soils, digging, backfilling, and the stringing, skidding up of pipe on skids. I am knowledgeable when it comes to distribution work in the road but all aspects of pipeline as well including transmission.

• Reviewed drawings and blueprints to complete inspection at appropriate levels.
• Identified production concerns and collaborated with supervisors to address and resolve issues.
• Filled out and submitted logs and paperwork on-time.
• Generated detailed reports outlining inspection and testing results.
• Conducted inspections of surface preparation applied to steel pipe.
• Performed profile readings after sandblasting to determine correct anchor profile with blast media being used.
• Monitored environmental parameters to ensure compliance with specifications prior to blasting or coating.
• Evaluated construction quality and company policies.
• Collaborated with team members to achieve project requirements, develop effective solutions, and meet deadlines.
• Wrote detailed reports outlining performance, quality and defect rates.
• Evaluated quality of paints, managed mixes and checked coverage for compliance with job specifications.
• Reported project progress, site problems and labor status to supervisors.
• Established and enforced procedures and work standards, promoting team performance and safety.
• Maintained detailed progress records to ensure adherence to strict deadlines and facilitate necessary adjustments.

• Planned and delegated work to meet planned project and production goals.
• Maintained high standards of safety, productivity and quality for every job.
• Communicated positively with employees, demonstrating high company standards and mitigating issues immediately.
• Led worksite preparation and project planning for smoothly run jobs.
• Worked closely with team members to deliver project requirements, develop solutions and meet deadlines.
• Fostered open communication among team members, enhancing collaboration and addressing issues promptly.
• Accomplished tasks according to schedule, assisting team members to meet deadlines.
• Cleaned and lubricated equipment on regular schedules to maintain life of machinery and achieve consistent operations.
• Holds daily JSA meetings so everyone has an understanding of the tasks.
• Compiled and submitted daily reports and time records to HR, ensuring accurate documentation of project activities.
• Talk with the inspector to ensure that our daily reports line up, having the same number of pay items listed.
• Observe the process of readying the ROW for access with machines and work trucks by installing truck mats.
• Observe the process of bridging over existing lines and across creeks with timber bridge mats.
• Install goal posts and flagging under power lines.
• Oversee a crew of 4 to 6 employees in the process of anomaly digs.
• Assist TEAM in the assessment of the coating and pipe.
• Oversee the application of installing wax tape wrap, Powercrete-F1, SP-2888 and SP-4888 epoxy coating.
• Took photos to document site images.
• Laid out and fielded staked utility lines and other features, facilitating accurate measurements.
• Located and determined depths of underground facilities and lines using Pipehorn locating equipment.
• Oversee the excavation process by ensuring operator keeps his 2' distance on top and the sides of the existing pipe.
• Observed potential hazards and obstructions, including utility lines, equipment, workers and falling objects, maximizing safe working conditions.
• Observed hand signals, grade stakes and markings to operate machines within performance specifications.
• Directed team activities by assigning tasks, supervising progress, and providing constructive feedback to ensure project alignment.
• Maneuvered trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment are properly positioned.
• Adhered to all workplace safety standards and OSHA regulations.
• Observe the backfill operations after the coating process is done, backfilling and padding dirt in 1' lifts to ensure proper compaction.
• Observe the seeding and fertilizing after the backfill operations. Final stabilization of ROW by blowing straw over newly seeded area.
• After job is complete, we start on the clean up of the ROW, removing all equipment and everything brought in to do the job.
• Also working in every aspect of new construction.
• Performed tie-ins to connect pipeline sections securely.
• Setting trench boxes
• Sloping to appropriate types of soil
• Installing shoring
• Pressure testing with charts, crystal gauges, deadman weights
• Running pigs and caliper tools
• Using air dryers
• Keeping up with daily notes of what my days consist of.
• Managed time effectively to meet project deadlines and objectives.

• Maintained high standards of safety, productivity and quality for every job.
• Planned and delegated work to meet planned project and production goals.
• Reported to supervisors weekly regarding project progress, site problems and labor status.
• Followed company policies by performing thorough equipment inspections prior to and after each shift.
• Identified and addressed potential hazards, including utility lines, equipment, workers, and falling objects, to enhance safe working conditions.
• Worked in accordance with DOT regulations when performing lane shifts or lane closures during roadwork operations.
• Operated heavy equipment in compliance with company's operating safety policies and procedures.
• Followed signals from ground crew and other operators to safely move materials and prevent dangerous interactions or missed cues.
• Maintained machinery by repairing and replacing broken and malfunctioning components.
• Kept equipment fueled and ready for immediate use to support scheduling demands.
• Located and marked underground pipes and wires to determine accurate digging locations.
• Reviewed and carefully followed all safety policies and procedures.
• Learned about new equipment and related attachments while maintaining knowledge of items used daily to meet job requirements.
• Observed company safety protocols, including trench safety and perimeter establishment, to reduce job site accidents.
• Implemented strict safety protocols for machinery operation, ensuring compliance with company standards.
• Oversee a crew of 4 to 6 laborers on the offloading, stringing up and welding of steel pipe on properly built skid settings.
• Delegated duties to each employee based upon his or her skills set and monitored progress daily.
• Encouraged and guided field workers to improve work quality and efficiency, contributing to overall project success.
• Oversee the sandblasting and coating process of steel pipe with two-part epoxy, Denso 7200 and Canusa two part epoxy and Scarguard.
• Oversee the jeeping of pipe with a holiday detector.
• Planned and delegated work for multiple construction crews.
• Controlled traffic around job sites to prevent dangerous situations and job interruptions.
• Suspended dangerous activities posing active or potential threat to worker health and safety.
• Oversee the lowering in and HDD pulling of pipe into a bore hole.
• Oversee the application of Scarguard.
• Assist in the pumping around of creeks and rivers.
• Communicated positively with employees, demonstrating high company standards and mitigating issues immediately.
• Managed team member schedules and individual assignments for work crew.
• Followed all rules and regulations to ensure that job sites were safe for workers, contractors and visitors.
• Trained crew members how to perform high-quality work with safety and efficiency in mind.
• Ensured complete working knowledge of project scope by carefully reviewing blueprints and specifications prior to starting job.
• Assisted with TD Williamson operations, including hot tapping and nitrogen purging of lines.
• Monitored team member work and assisted with accomplishing objectives.
• Examined pipelines using a pressure gauge, hydrostatic testing, [Deadman weights, and other methods.
• Worked closely with team members to deliver project requirements, develop solutions and meet deadlines.
• Evaluated materials for quality and sorted parts and final products.
• Accomplished tasks according to schedule and helped struggling team members.
• Cleaned and lubricated equipment on regular schedules to maintain life of machinery and achieve consistent operations.
• Trained crew members on how to safely and efficiently operate excavators, skid steers, sweepers, and asphalt rollers.

• Promoted a safe and clean working environment.
• Built relationships with construction manager and contractors to align project priorities and objectives.
• Maintained safe and secure job site for entire workforce to prevent injuries and errors.
• Managed work with little supervision.
• Completed Daily Field Reports to document site activities
• Completed weekly time sheets to accurately track labor hours
• Kept and reported multiple receipts on a daily basis.
• Planned and delegated work for multiple construction crews.
• Set high standards for safety, productivity, and quality for every job.
• Operated excavators and other construction equipment to proper depth of ditch on and near hot lines and other utilities.
• Confirmed adherence to all safety protocols by team members and followed strict measures to avoid accidents and injuries.
• Improved operations by working with team members and customers to find workable solutions.
• Led laborers in stringing and welding steel pipe on properly constructed skid settings, ensuring quality and compliance.
• Oversee the sandblasting and coating of steel pipe with two part coatings.
• Oversee the ditch digging for appropriate depth and width.
• Oversee the lower in process with multiple pieces of equipment.
• Oversee the backfilling process for adequate coverage.
• Updated supervisors weekly on project progress, site challenges, and labor status to maintain transparent communication.
• Assigned duties to each employee based upon his or her skills set and monitored progress daily.
• Planned and delegated work to meet planned project and production goals.