Sarah Maye
Saint Johnsville,NY
Summary
Diligent, adaptable, and positive individual with well-honed time management, problem-solving, and multi-tasking skills.
Enthusiastic and outgoing, as well as motivated, hard-working, and safety-conscious. Excelling in both a team environment, and working independently. Eager to learn, reliable, and punctual.
Very well read, written, and spoken. Quick with math and a highly analytical thinker. Seeking a long-term, full-time position that's challenging, rewarding, active, and that highlights the many skills and qualities brought forth, which make for a stellar team-member.
Overview
4
4
years of professional experience
1
1
Certification
Work History
Warehouse Associate
Target Distribution Center
07.2021 - 12.2023
- Licensed on RC forklift, stock picker, and tugger, and used at least one of these pieces of equipment daily. Often times, transitioning from one to another, performing multiple job duties in one shift, as needed.
- Scanning store/product labels and pulling product at various heights and locations with picker.
- Verifying location, labeling, and pulling cartons, and placing them in carts provided.
- Putting locations on hold if not enough inventory available for order, inventory is off, or if location is hazardous to pull from, ie tipped pallet.
- Reinstating stray items back into system. Maintaining inventory and up or down adjusting to reflect physical numbers.
- Was part of cycle count group and performed various specialty functions, using Symbol hand held scanners with company software.
- Pulling from and putting into bulk locations, using RC forklift with onboard scanner and computer with company software for this assignment.
- Safely lifting, pushing, and pulling, sometimes rather heavy, merchandise on daily basis.
- Operated tugger to pull up to 5 carts full of product in chain to various locations and departments. Being alert to your surroundings is critical, as you are pulling lot of weight and must be aware of everything and everyone around you. Good wide-turn skills are extremely important on this vehicle.
- Most functions were production-based and fast-paced, requiring certain rate of speed, fluidity, and accuracy.
- Motivation, initiative, and team-oriented approach and consideration are essential to these functions. What we do individually, influences group as a whole, and in turn, success of company.
Order Selector
Walmart DC 6096
12.2019 - 07.2021
- Numbers, numbers, numbers...This job was all about hitting 100% or better.
- Very physical...Fast paced, with lot of heavy lifting.
- Use of headset to receive information about particular types of "trips" you're assigned. You're recited a group of numbers and repeat back couple of digits in sequence assigned for that day, verbally confirm quantity requested, and adjust accordingly, if short.
- Licensed and trained on QPR, (stands for "quick pick remote"), which is vehicle with rear forks that can be raised or lowered to place or remove material from storage location. Equipped with push button hand remote that allowed to walk along with equipment and stack on pallets stowed behind it. Daily inspection of vehicle performed daily before operation.
- Free stacking merchandise, usually for double, 70 cube pallet, trip.
- Multitasking, time management, attention to detail, and motivation are necessary skills and attributes to becoming fluid and adept in this position.
- In rotation with other employees taking turns running pallet wrapping machines and then removing wrapped pallets and loading them onto trucks with matching store numbers.
- Also in rotation for task of seeking out items that were missing from orders that were about to go out on trucks. Perhaps location was empty when pulling for order, but had been replenished with enough time to get it out to store.
Industrial Painter
Randstad
09.2019 - 01.2020
- Prepared surfaces and surrounding areas for painting using scrapers, sandpaper, tape, and other materials.
- Provided supervisor with daily status report on all job tasks and workers' duties.
- Primed, painted, varnished and lacquered walls and surfaces.
- Repaired wall holes and scrapes.
- Protected surfaces from damage and spills by using drop cloths prior to and during painting.
- Climbed scaffolding, staging, ladders, and planks to reach work area surfaces and observed safety protocols to prevent falls. Used scissor lift to travel to and from any areas throughout factory that were too high for ladder to reach.
- Prepared trim, walls and ceilings for painting by cleaning, smoothing, and priming.
- Evaluated completed work for quality and adherence to standards and client requirements.
- Peeling or chipping paint is important to stay on top of in food production setting. There are stricter building compliance standards to uphold that are enforced by OSHA, FDA, EPA, and USDA. Therefore, full-time painters, or in this case, painter, as I was only one at that time.
- Worked evenings to avoid any unnecessary production interference or risk of food contamination.
- Painted all safety lines and railings throughout facility
- Patience, steady hand, and attention to detail really come into play to be successful in this role.
- Taking pride in quality of ones work and a positive approach, of course.
Education
Associate of Applied Science - Graphic Communications Sales And Marketing
Fulton Montgomery Community College
JohnstownCertificate - Graphic Communications
HFM Career And Technical Center
Johnstown, NYSkills
- Forklift operations
- Shipping and Receiving
- Product Verification
- Freight Labeling
- Merchandise Staging
- Order picker and Tugger licensed and trained
- Warehouse Logistics
- Order Picking and Processing
- Inventory Counting
- Cycle Counting
- Heavy Lifting
- Pallet Jack Operations
- Complex Problem-Solving
Accomplishments
- "Ramped up" on multiple pieces of equipment and trained in a multitude of specialty functions. Earned through regularly demonstrating reliability, proficiency, initiative, and commitment to my job and my team, as well as respect and regard for management and the rest of our workforce as a whole.
- Led a team of 8 employees, assigned to a weekend factory-wide floor painting project.
- Implemented a couple of different templates that were used by other departments and helped eliminate recurring errors and interdepartmental confusion.
- Attended, participated, and studied in the 'Leading to Greatness' program and earned the certificate of completion. Provided by the Center for Employer Services through FMCC.
Certification
RC Forklift, Target, Licensed in 2022
Tugger, Target, Licensed in 2023
Order Picker, Target, Licensed in 2021
QPR, Walmart Distribution Center 6096, licensed in 2019
Scissor lift training, Randstad for Richardson Candy Company
Timeline
Warehouse Associate
Target Distribution Center
07.2021 - 12.2023
Order Selector
Walmart DC 6096
12.2019 - 07.2021
Industrial Painter
Randstad
09.2019 - 01.2020
Associate of Applied Science - Graphic Communications Sales And Marketing
Fulton Montgomery Community College
Certificate - Graphic Communications
HFM Career And Technical Center
Similar Profiles
Daniel ColemanDaniel Coleman
Warehouse Worker at Target Distribution CenterWarehouse Worker at Target Distribution Center
Marsha NobleMarsha Noble
Medcor Worsksite Health Technician/RN Case Manager at Medcor/Target Distribution Center T3892Medcor Worsksite Health Technician/RN Case Manager at Medcor/Target Distribution Center T3892
Gregory LucasGregory Lucas
Warehouse Worker at Target Distribution CenterWarehouse Worker at Target Distribution Center
Natalie TorresNatalie Torres
Warehouse Associate/Forklift Operator at Target Distribution CenterWarehouse Associate/Forklift Operator at Target Distribution Center
Deborah ZeidnerDeborah Zeidner
LPN at Saint Mary's HealthcareLPN at Saint Mary's Healthcare