Scott Bruechert
Manitowoc,WI
Summary
Im a hardworking individual with21/2 years in Maintance role as shadowing super intendent of maintance for that time, the other about21/2 just in general labor. Skilled in forklift operations, equipment repair and maintenance, general electrical, fabrication and welding . Fimilure with opening and closing plant for a little more then2 years. Dedicated to helping team succeed by working hard and fast completing any task given to110% of my ability, also with quality. Capable of understanding and following orders, reading technical manuals and using hand and power tools. Excellent physical stamina with flexible schedule, and willing to work over time. Motivated maintenance professional with strong mechanical aptitude and knowledge of system operations. Exsperanced in LOCK-OUT-TAG OUT procedure. Always willing to grow my skills and learn new things .
Overview
15
15
years of professional experience
Work History
Level 2 Assembler
CNH Agriculture Industry
01.2024 - 11.2025
- Increased production efficiency by assembling components quickly and accurately.
- Enhanced workplace safety by maintaining a clean and organized work area at all times.
- Maintained high-quality standards with thorough inspections of assembled parts.
- Demonstrated a strong work ethic by consistently arriving on time, prepared to begin work immediately, and contributing positively to the team''s overall success.
- Assemble Chassis with provided parts such as A-Arm, Front and Rear Legs, Hydraulic Lines, Panels, Steering Parts, Large and Small Bolts provided by multiple rolling Parts Carts with various parts, Install sliders and hydraulic blocks (valve) all with adjustments.
- Installing of Hydraulic cylinders into rear legs and large impact bolts.
- Various uses of different styled Air Tools including large Impacts and Hand tools.
- Moving of Sprayer Machine into and out-of Station.
- Installing of Roller-Pins.
- Movements of parts into Station Area and use of Overhead Cranes.
- Install of all the Hardware such as Bolts, Washers, And Nuts of Various Sizes. Seals where needed.
- Drive-Motor(PTO) installation on Legs and torque
- Install of Spacer Shim's
- Make sure machine was presentable and clean by wiping down and cleaning up any hanging parts or hydraulic lines.
Landfill Technician
Waste Management Services (landfill)
03.2019 - 09.2023
- Maintained a safe work environment by strictly adhering to established safety protocols and guidelines.
- Trained new technicians on standard operating procedures, ensuring consistency across the team.
- Performed troubleshooting and diagnosis on malfunctioning equipment.
- Completed complex repairs quickly by leveraging strong diagnostic skills and attention to detail.
- Replace gas lines that were dug up and/or damaged along with certified butt-fuzz welding and Fazzer for surface cuts to even Premium Pipes to set together evenly.
- ADT certified through company, Payloader, Water Tanker, and Large standard dump and Roller
- Maintenance of Site by making sure it was presentable for customers and state
- Ph readings 4x a month on Bio Pile with a Voc Meter for state records and per-permit
- On-site transfers of materials such as large pipes, metal material, fence material, etc.
- Transfers on materials with heavy equipment, watering roadways, use of tractor, smoothing of roads and resurfacing, was able to drive on slope sides when weather cooperated
- Switching out pull pumps that were inside of gas pulling pipe lines (on-site)
- On and Off-site operation with heavy equipment and with driving 4x4 vehicles
- Moving various material to different location, moving of wind screens, and various bucket for excavator and tractor
- Build custom fences of various sizes (7ft & 6ft) use of machinery and hand tools
- Washing of tilt (lg. well) pumps (3 types)
- Acid washing of Port-Wells, pressured
- Passed 2 of the 3 State Required tests for well-tech and certified(2)
- Plowing of roads and roadways as needed with Front-End loader and farm tractor with 12ft. plow
- Under supervision, checked and repaired power panels to well appliances
- Replaced Push blade for compactor and filled water truck at water facility and and overhead well systems
- Power washed heavy equipment and cut lawn with a zero turn (diesel)
- Move on site materials such as large and small dumpsters switched buckets and forks on heavy equipment and made minor repairs and greased all grease points
- Use of a VAC system with PTO.
- Proper clean-up practices if chemical mixtures were to be spilled on concrete inside and/or outside.
- Gator (UTV) driving hours with Pipe-Pull and tow rope
- Lime-Away use with high-flow power washing
- Defibulator and CPR Certified, Fire Safety Trained (A,B,C)
Maintenance Technician
Jagemann Plating Company INC
04.2014 - 08.2019
- Operated hand and power tools to complete repairs, replacing limit switches and head units and body's along with switch levers, rebuilding wet air pumps such as diaphragm's, pistons, seals, floats and reinstalling them (large and small, cast iron ,some with a bronze cooling gear and hardened plastic)
- Replacements of Trolley/ Cart wheels and adjustments
- Installing machine lift (goose neck) and balancing them from adjustable brakers for correct usage
- Uninstalling and reinstalling rollers for balance of goose lift and adjustments
- Monitored building security and safety by locking doors after operating hours and checking electrical appliances to prevent safety hazards such as fires and fines
- Lock out and tag out knowledge on jessup, and cyclemaster machines and main cabinets along with breaker boxes to use as main shut off switches
- Dismantling machinery and reinstalling new appliances
- Uninstalling rectifiers and installing back up rectifiers, Installing main power and ground lines, cut and bend bussing panels and installing with adjustments
- Valve,and check valve replacements (pvc,cpvc, and conduit)
- Bend and install fitting on conduit airlines with cpvc and occasionally pvc
- Filter replacements on carbon and zinc filters, along with involving pipework duties and securing lid
- Hanging pipes under and above catwalks, and cutting to fit, hardener and glue
- Main breaker emergency routine such as fire and flood drills as required
- Evaluated systems in use to uncover problems, complete maintenance and recommend solutions (arc-flash)
- During Monday Openings, would make sure Waste Management Area was running and operating properly along with additions of Lime, and also Water adding to a 3 Barrel system to properly improve water quality that was being returned to outside systems and to make sure Propellors were mixing and lines were not closed off.
- Replacing barrel drive motors and drive gears and transmissions, burn barrels to open pin holes
- Also replacement of axles and bushings
- Changing out fuse boxes and buss fuses on main shut off switches and spin dryers (3-WAY), relighting pilot on pickle during start-ups
- Fix chain hoist and troubleshoot problems for repair (rebuilds) and chain untangling, remote replacement
- Diagnosed problems with mechanical and electrical systems and equipment using advanced troubleshooting abilities
- Replacements of hydraulic seals and replacement of hydraulics on machines and adjustment, torque
- Checking contactor's and magnums and replacements, scope, and adjustments and electrical check (pilot-lite)
- Replacements of valves and acid wash steel heat pipes in cleaner tanks
- Hose and cooling coil line replacements and coils
- Performed simple carpentry tasks, cleaning cat-walks and floor piping system, including installing shelves, light switches and plugs, large shelving with anchor bolt systems
- Replacements of pulleys and pulley belts on such things as ventilation recirculators and spin dryers and cleaning filters
- Switching out barrel drive motors and gears while unit is still operating (performance) as sometime required (production)
- Replacing gears and stators, contacts and overlimit contact switches, and also micro switches
- Also repair lift bars and lift levers, push dogs and guides with railings
- Replace contact bars and guides along with buss bars
- Inspected components of industrial equipment for accurate assembly and oversee installations to prohibit defects, such as loose connections, frayed wires, correct installment and neatness
- Cleaning of scrubber vents and plastic welding
- Turning on and off of motor such a heaters and replacement, mains switches, ventilation vent motors, air pump motors, and wet pump pumps, recirculators systems with and without transmission motors tall and short
- Replace motor plugs, boots and cables
- Can use a kerosene power sprayer and scissor lift (1- year)
- +3 years forklift experience through company certification
Meat Packer
Salm Products
01.2014 - 03.2015
- Used tools, sprayers and cleaning solutions to clean contaminants from work areas
- Loaded raw beef from racks into dicing equipment with consistent speed and flow to maintain synchronized operations with different stations
- Troubleshooted problems with equipment, devices or products
- Maintained clean and organized work areas
- Started up and shut down processing equipment
- Consulted welding chart specifications to select appropriate type and thickness of metal
Caregiver
Personal
01.2011 - 11.2014
- Ambulated patients in personal spaces, across facilities and in public locations with supportive care and attention to personal requirements
- Planned and prepared nutritious meals and snacks to meet client dietary requirements such as diabetic, low sodium and high protein
- Transported clients to locations such as medical appointments and group meetings to maintain social connections and meet medical needs
- Helped clients handle all personal needs, from simple cleaning and daily exercise to bathing and personal grooming
- Assisted families in planning for meals and shopping for ingredients to meet nutritional plans
- Completed general housekeeping work to help clients, including preparing healthy meals and keeping personal areas neat
- Provided basic care for elderly patient, including scheduling appointments and managing finances and legal matters
- Worked to improve patient outlook and daily living through compassionate care
Education
High School Diploma -
Two Rivers High School
Two Rivers, WIBachelor of Science - Environmental Engineering
Unity Environmental University
Maine10-2028
Skills
- First aid, cpr and safety equitment priorities(PPE)
- Records management and stock inventory, leave detailed notes for the next shift
- Compassionate client care
- Good Communication and direction skills able to leave a detailed note upon leaving shift
- Can use a mig and stick welders and other equipment such as running/operating tools such like essetalling tourch and plasma tourch
- Quick learner and always try to keep a clean work space
- Can work well with others and also alone
- Complex problem solving (computer skills)
- Troubleshooting strength, voltage meter and voltage pen knowledge and use Knowing how to test for shorts
- Codes compliance
- Power and hand tool use as in tape measures, sawsall, hacksaw, drills, drill press, grinder wheels, impact wrenches and torque wrenches Asetelling tourch as well as a propane tourch Threaders and back-out bits
- Safety protocols (lock out tag out), Arch flash trained Replacing floor I-Beam supports on barrel units or other machines, heaters and wire in heats(element heaters) Work with3 phase motors, shafts, bearings, and seals such as ram seals Oil and filter replacements/ belts and oil lines
- General plumbing(pipe fitting) of kirks and pipe clamps and straps ( PVC, and CPVC) and installing leg bolts to walls and floors minor steel tubing Replacements of scrubber motors and lovejoys
- PM equipment maintenance and failure diagnostics, magill and relay replacement and service box Knowledge of digital and manual cabinet functions Changing out master relay timers and light bulbs, also bus fuse replacments
Timeline
Level 2 Assembler
CNH Agriculture Industry
01.2024 - 11.2025
Landfill Technician
Waste Management Services (landfill)
03.2019 - 09.2023
Maintenance Technician
Jagemann Plating Company INC
04.2014 - 08.2019
Meat Packer
Salm Products
01.2014 - 03.2015
Caregiver
Personal
01.2011 - 11.2014
High School Diploma -
Two Rivers High School
Bachelor of Science - Environmental Engineering
Unity Environmental University
Similar Profiles
Yusuph McheleYusuph Mchele
Finance Manager at Tanzania Chamber of Commerce Industry & Agriculture (TCCIA)Finance Manager at Tanzania Chamber of Commerce Industry & Agriculture (TCCIA)
TONI ROSE BARROGATONI ROSE BARROGA
Veterinarian III at Department of Agriculture-Bureau of Animal IndustryVeterinarian III at Department of Agriculture-Bureau of Animal Industry
Nayomi Jones-RapierNayomi Jones-Rapier
Biological Laboratory Intern at United States Department Of Agriculture-Agriculture Research Service-National Center Of Agriculture Utilization ResearchBiological Laboratory Intern at United States Department Of Agriculture-Agriculture Research Service-National Center Of Agriculture Utilization Research