Scott Holtsclaw

• Fabricated metal products using MIG welding techniques for waste equipment.
• Interpreted blueprints and technical drawings to guide welding processes.
• Maintained welding equipment and tools for optimal performance and safety.
• Collaborated with team members to ensure efficient workflow in production area.
• Conducted quality inspections on welds to meet industry standards and specifications.
• Assisted in training new welders on safe practices and operational procedures.
• Ensured compliance with safety regulations and protocols throughout work operations.
• Set up and operated MIG welding machines according to established safety procedures.
• Produced smooth and even welds by maintaining consistent approach.
• Inspected finished products to ensure accuracy in accordance with blueprints and specifications.
• Maintained a clean workspace throughout the day.
• Used correct tools, materials, and attachments for the specific job.
• Repaired worn or damaged parts by cutting out sections using torches or plasma cutters then re-welding them into place.
• Completed welds in flat, horizontal, vertical, or overhead positions.
• Worked collaboratively with other team members to complete complex projects efficiently within deadlines.
• Filled gaps between parts using various types of filler materials such as fluxes, rods, wires and alloys.
• Cleaned workpieces prior to welding using wire brushes, grinders or chemical solutions.
• Connected and turned regulator valves to activate and adjust gas flow and pressure and obtain desired flames.
• Diagnosed hydraulic system failures and identified necessary repairs.
• Repaired and replaced hydraulic hoses, fittings, and pumps as needed.
• Performed routine maintenance on hydraulic machinery and equipment.
• Pulled out old and malfunctioning components such as hoses and replaced with new parts.
• Operated heavy machinery with hydraulics to test functionality after repairs or adjustments.

• Performed regular maintenance and repairs on plumbing, electrical, heating, and air conditioning systems.
• Inspected buildings and grounds for safety hazards and code violations.
• Repaired broken windows, doors, walls, floors, ceilings, roofs, and other building components.
• Performed minor carpentry work such as installing shelves or repairing furniture.
• Operated power tools such as saws and drills to perform various repairs.
• Repaired machines, equipment or structures using tools or equipment.
• Stacked loaded pallets in designated areas using proper stacking methods according to company policies and procedures.
• Assisted in the loading and unloading of goods from trucks, containers and railcars using forklift.

• Performed preventive maintenance tasks, including lubrication and cleaning of machines and equipment.
• Conducted electrical repairs on motors, lighting systems, and other related components.
• Assisted in the installation of new machinery and equipment.
• Repaired or replaced faulty wiring, switches, relays, and other electrical components.
• Performed preventative maintenance on welding tools and equipment.
• Operated manual and semi-automatic welding equipment to fuse metal segments together.
• Completed minor torch ups with MIG welders.
• Prepared broken parts for welding by properly grooving and scarfing surfaces.
• Performed preventative maintenance on the tractor such as lubrication, oil changes, and filter replacements.
• Followed safety protocols while operating heavy machinery.
• Cleaned up debris and removed it from job site areas.
• Inspected tractors for mechanical defects or malfunctions prior to operation.
• Operated tractor and trailer to haul equipment, supplies, and materials.
• Cut stumps flush with ground level after felling a tree.
• Operated chainsaw in a safe manner to fell trees, buck logs and cut firewood.

• Erected trusses using hand tools and power tools such as saws, drills, and nail guns.
• Measured, cut and assembled wooden components to form trusses according to specifications.
• Loaded pre-cut lumber onto jigs for assembly into trusses.
• Set up miter saws and other machines to cut wood to specified lengths.
• Assembled parts of the truss with glue, nails or screws in preparation for welding.
• Checked finished trusses for accuracy and conformance to design standards.
• Read blueprints and technical drawings to determine dimensions of each component needed for construction.
• Maintained accurate records of all materials used in the production process.
• Operated forklifts safely when loading and unloading materials from trucks.
• Assisted with training new employees on proper safety procedures when building trusses.

• Installed parts along production line in constant operation.
• Tested components, assemblies and systems to diagnose problems.
• Organized, analyzed and prepared technical data reports.
• Monitored the supply inventory and submitted orders as needed while complying with maintenance budget restrictions.
• Performed repairs and scheduled maintenance of company equipment including small engines and electrical bumper cars.
• Maintained optimal supply levels to meet expected demands without overreaching budget targets.
• Coordinated efficient maintenance schedules to keep amusement rides up an running.
• Inspected and completed work.
• Improved operations by working with team members and customers to find workable solutions.
• Created agendas and communication materials for team meetings.
• Worked closely with team members to deliver project requirements, develop solutions and meet deadlines.
• Provided excellent service and attention to customers when face-to-face or through phone conversations.
• Improved customer satisfaction by finding creative solutions to problems.
• Repaired broken or cracked parts using cutting torches and welding equipment.
• Determined appropriate filler metal type based on joint design and material being joined together.
• Operated manual or semi-automatic flame-cutting equipment to cut metal for fabrication of products.
• Gathered required materials for each project in order to meet production deadlines.
• Adjusted settings on machines such as current level so it matches the specifications outlined in blueprints and drawings. Weld and repaired all track and carts for state inspections.
• State inspections every 6 months
• Fabricated new parts when necessary from metal stock or other materials.
• Ordered replacement parts as needed based on diagnostic tests results.
• Maintained records of time spent on each job performed.
• Cleaned and lubricated parts with solvents or lubricants.
• Inspected parts for wear and damage using precision instruments.
• Performed diagnostics and repairs on a variety of small engines, including lawn mowers, snow blowers, chainsaws and leaf blowers.
• Installed new engines in place of old ones utilizing appropriate tools.
• Repaired electrical systems including wiring harnesses, ignition systems and switches.
• Participated in training sessions designed to increase knowledge about safe operation of high reach forklifts.
• Conducted daily safety checks on equipment and reported any issues immediately.
• Operated high reach forklift to transfer materials between warehouse locations.

• Installed parts along production line in constant operation.
• Tested components, assemblies and systems to diagnose problems.
• Organized, analyzed and prepared technical data reports.
• Worked from layout and work order, created programs and set up machines to produce required parts.
• Rebuild motors and high pressure pumps for commercial pressure washers

I stared out as a custodial work then moved to high pressure. pressure washer mechanic then move to facility maintance department

• Conducted routine checks of fire alarm system components to ensure they are working properly.
• Responded quickly to emergency repair requests from tenants or visitors at the facility.
• Ensured that all safety protocols were followed when performing maintenance tasks.
• Repaired broken windows, doors, walls, roofs, and other building components.
• Cleaned and maintained all equipment used in facility maintenance operations.
• Installed new plumbing fixtures such as sinks, toilets, showers, tubs, valves.
• Inspected buildings' structures to determine the need for repairs or renovations.
• Used ladders or scaffolding to access hard-to-reach areas during maintenance tasks.
• Operated power tools such as drills and saws to perform necessary repairs.
• Cleaned and lubricated parts with solvents or lubricants.
• Maintained records of time spent on each job performed.
• Ordered replacement parts as needed based on diagnostic tests results.
• Inspected parts for wear and damage using precision instruments.
• Installed new engines in place of old ones utilizing appropriate tools.
• Repaired electrical systems including wiring harnesses, ignition systems and switches.
• Disassembled engines to gain access to defective parts for removal or repair.
• Rebuilt starters, generators and alternators as needed.
• Kept workshop and bench area tidy and clean.
• Followed company and manufacturer guidelines for completing repairs.
• Documented work performed on each piece of machinery to back up customer invoices.
• Overhauled entire engines to restore functionality and keep equipment running at peak levels.

• Pruned trees and bushes to improve visibility and shapes.
• Read and followed landscaping plans to install plants and fixtures for residences and businesses.
• Protected customer lawns by applying weed and pest control chemicals.
• Cleared pathways of overgrowth and debris or hazards such as snow.
• Troubleshot mechanical issues and completed basic repairs to keep equipment working at peak levels.
• Prepared soil and gardens for planting with mulch and sod.
• Trimmed shrubbery and trees and carried out general garden maintenance.
• Lined flower beds with wood mulch.
• Maintained equipment and notified supervisors of needed repairs.
• Pulled weeds and sprayed lawn with weed killer and other chemicals.
• Loaded and unloaded equipment from trailers and trucks.
• Mowed and edged grass to trim lawn and removed cut grass using gas-powered leaf blower.

• Notified supervisors of faulty operations and defective materials.
• Supported project managers in developing effective work schedules for each project team and stage.
• Sustained safety protocol by ensuring proper, cost-effective and safe handling of equipment and materials.
• Completed routine carpentry work, including installing crown molding and wood flooring to meet customer preferences.
• Coordinated communication between equipment operators by using two-way radios and hand signals.
• Built and disassembled scaffolds, bracing and barricades.
• Renovated various structures under tight timelines and on strict budgets.
• Built new structural components and replaced worn parts with updated pieces meeting current code standards.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Transported tools, materials and supplies to job locations.
• Built controllers and panels to complete system installations.
• Maintained organization, cleanliness and safety in all work areas.
• Kept work areas clean, neat and free of hazards.
• Kept resources current, organized and maintained in optimal condition.
• Troubleshot and resolved problems with programs and systems.
• Expanded systems with new features and structural components.