Company Overview: Newport Lateral North Expansion Project
Lead Inspector (project supervisor) working hand in hand with contractor to assure client a satisfying and completed project
Lead CPWI+V assisting on all stages of welding giving visual inspection on finished welds
Responsible for detailed daily reports to client and contractor, including pictures, and brief description of duties performed by contractor as well as my inspection crew
Responsible for building and completing As Built Welding Book for 4 mile project
Responsible for signing off on all film and Xray reports
Responsible for other inspectors working with contractor throughout project
Newport Lateral North Expansion Project
NACE Coating Inspector / General Utility Inspector
Dominion
Salem, WV
11.2019 - 11.2020
Company Overview: ACP Supply Header
Checking erosion controls daily, following best management practices to meet agency requirements
Overseeing the sandblasting of main line and tie in welds
Overseeing the contractor taking anchor profile patterns with replica tape on blasted welds
Monitored the application of SP2888 and Denso 7125 coatings
Checking ambient conditions including steel temp, air temp, dew point, relative humidity, etc
Observing use of holiday detection device to find any holidays or imperfections in the coating
Monitored the contractor trenching, padding, backfilling, laying stone and digging road bores
Turning in daily reports on coating, trenching, padding and backfill, and keeping a photo log
ACP Supply Header
NACE Coating Inspector / General Utility Inspector
Synergy Inspections
Brant/Collins, NY
05.2019 - 11.2019
Company Overview: National Fuel/Gas RM 32 & RM22S
Overseeing the sandblasting of main line and tie in welds on 16 and 12 in take up and re-lay
Taking anchor profile patterns with replica tape on blasted welds
Monitored the application of SP2888 coatings
Checking ambient conditions including steel temp, air temp, dew point, relative humidity, etc
Observing use of holiday detection device to find any holidays or imperfections in the coating
Monitored the contractor trenching, padding, backfilling, including wetland and stream crossings
Documenting daily activities in field book to turn in at end of project
Turning in daily reports on coating, trenching, padding, backfill and daily activities
National Fuel/Gas RM 32 & RM22S
Chief Inspector
Hawk Technical Services
Birmingham, AL
02.2019 - 05.2019
Company Overview: Magellan Orion West/Sirius Pipeline
Oversaw the FBE and ARO application process for 20 and 24 in pipe for multiple projects
Managed and delegated responsibilities for other employees including data processing, final and steel bench, load out and repairs
Monitored daily testing including Adhesion, Flexibility, 24 hr CDT (Cathodic Disbondment), 48 hr Moisture Perm, Interface and Cross-Section Porosity, Interface Contamination, and Impact Resistance
Generated daily detailed reports with Microsoft excel and or Word spreadsheets including environmentals, batch expiration dates and batch numbers, as well as pictures and pipe info
Magellan Orion West/Sirius Pipeline
NACE Coating Inspector / General Utility Inspector
Dominion
Salem, WV
07.2018 - 01.2019
Company Overview: ACP Supply Header
Checking erosion controls daily, following best management practices to meet agency requirements
Overseeing the sandblasting of main line and tie in welds
Overseeing the contractor taking anchor profile patterns with replica tape on blasted welds
Monitored the application of SP2888 and Denso 7125 coatings
Checking ambient conditions including steel temp, air temp, dew point, relative humidity, etc
Observing use of holiday detection device to find any holidays or imperfections in the coating
Monitored the contractor trenching, padding, backfilling, laying stone and digging road bores
Turning in daily reports on coating, trenching, padding and backfill, and keeping a photo log
ACP Supply Header
NACE Coating Inspector / Utility Inspector
Cleveland Integrity Services
Bethany, WV/Lancaster, PA
06.2017 - 06.2018
Company Overview: Meridian East 2 - Sunoco
Overseeing the sandblasting of main line and tie in welds
Taking anchor profile patterns with replica tape on blasted welds
Monitoring the application of SP2888 and R95 coatings
Checking ambient conditions including steel temp, air temp, dew point, relative humidity, etc
Using holiday detection device to find any imperfections in the coating
Monitoring the contractor trenching, padding, backfilling and road bores
Keeping up with survey station numbers (Including any trench breakers)
Turning in daily reports on coating, trenching, padding and backfill, and keeping a photo log
Monitored anomaly dig ups
Monitored contractor through final restoration and clean up including: ripping/decompacting sub soil, removal of rocks (3" or bigger in agriculture areas, 4" or bigger in wooded areas), removal of trash off ROW, removal of old/existing silt sock replacing with new, digging trenches for drain tile, seeding, hairing, mulching, repairing/replacing any and all ECD's, removal of timber, removal of mats, building water bars, building sumps, building rock approaches, pushing top soil, grading ROW, keeping track of loads of broken mats, number of trash loads hauled, number of good mats we save, photo log, and keeping in touch with land agent to make sure line list is being upheld and to LO standards
Meridian East 2 - Sunoco
Lead Coating Inspector
Intertek
Bessemer, AL
02.2017 - 06.2017
Company Overview: Ornelas, Meccon, and SCANA
Monitored the ID Lining of International 850 both buff and white of 24" pipe and assorted fittings
Monitored the application process of Powercrete DD Tan to OD of 24" line pipe
Monitored the application process of 323 Green to assorted fittings
Generated daily reports with Microsoft excel and or Word spreadsheets detailed with environmentals, batch expiration dates and batch numbers, as well as pictures
Ornelas, Meccon, and SCANA
Chief Inspector / Materials Coordinator
McDaniel Technical Services
Hamel, IL
01.2016 - 02.2017
Company Overview: Energy Transfer
Received and inspected all weld, thread, bolt-up fittings, and small bore valves for all spreads of ETC's 1,100 mile DAPL and ETCOP pipeline project
Checked in material delivered and verified that all items met or exceeded the specifications set forth in ETC's P.O.'s with regards to grade, wall thickness, dimensions, engineering modifications, and applicable industry codes
Recorded manufacturer data and heat number/s for each item to insure that the materials were sourced from approved manufacturers and that all MTR's were on hand and filed with the corresponding purchase orders
All non-conforming or defective materials were quarantined and returned to the vendor
Materials were signed over to the contractor upon request and recorded with signed and dated material transfer logs
Energy Transfer
Chief Inspector
McDaniel Technical Services
Patoka, IL/Jacksonville
08.2015 - 01.2016
Company Overview: Energy Transfer
Oversaw delivery and staging of FBE and ARO coated carbon steel line pipe to receiving yard for Energy Transfer Pipeline project
Oversaw daily operations and managed Inspection crews as well as working as active liaison between the onsite supplier representative and ETC project management
Kept detailed books of any and all paperwork including but not limited to NCR's (quarantined pipe), Job Safety Analysis, Incident Reports, Timesheets, Expense Reports, Daily Progress Reports, Coating Repair Log, BOL's, Rail Tally Sheets, Etc
Maintained daily, detailed, pipe tracking manifest that included multiple wall thicknesses, coatings, length breaks, damages, repairs, traceability issues and any other notable anomalies
Generated daily reports which consisted of Microsoft Excel spreadsheets detailing daily material received, total length received, total joint count, damaged pipe, NCR Reports and Log, Repair Application Log, Receiving Report, Running Manifest, Etc
Energy Transfer
Chief Inspector
Intertek
Baton Rouge, LA
02.2015 - 05.2015
Company Overview: Energy Transfer
Energy Transfer
Chief Inspector
Project Consulting Services
Birmingham, AL
01.2015 - 02.2015
Company Overview: NRG TCV PIPELINE
NRG TCV PIPELINE
Chief Inspector
Project Consulting Services
Panama City, FL
12.2014 - 01.2015
Company Overview: Genesis
Genesis
Assistant Chief Inspector
Quality Integrated Services
Birmingham, AL
04.2014 - 10.2014
Company Overview: Williams
Inspection of carbon steel line pipe for gouges, pits, dents, various steel defects/anomalies etc
Inspection of FBE and ARO mill applied coatings for proper substrate preparation, coating procedure, holidays, customer specified mil thickness, etc
Maintained a daily record of all inspections of the pipe during all phases of production and acted as primary liaison between customer and contract supplier
Oversaw Steel Bench Inspectors and Coating Mill Inspectors
Observed all tests including the Steel Lab's Tensile, Charpy, Guided Bend, and Drop Weight tests as well as all Coating Labs including CDT, DSC (Thermal Analysis) Scans, Profile Analysis, Flexibility, Adhesion, Impact Resistance and Visual Analysis
Sent out daily reports included but were not limited to; a detailed description of day's activities, any equipment malfunctions or break-downs, footages and piece count to date of both prime and reject/re-work (damaged) material
Williams
Assistant Chief Inspector
Quality Integrated Services
Panama City, FL
02.2014 - 04.2014
Company Overview: Williams
Williams
Utility Inspector
Quality Integrated Services
Fontana, CA
01.2014 - 02.2014
Company Overview: Medallion Midstream
Medallion Midstream
Utility Inspector
Quality Integrated Services
Fontana, CA
01.2013 - 09.2013
Company Overview: OneOk, Glass Mountain
OneOk, Glass Mountain
Utility Inspector
Quality Integrated Services
Fontana, CA
11.2012 - 12.2012
Company Overview: Conoco Phillips
Conoco Phillips
Utility Inspector
Quality Integrated Services
Sidney, NE
07.2012 - 11.2012
Company Overview: OneOk
OneOk
Utility Inspector
Quality Integrated Services
Mckeesport, PA
08.2011 - 05.2012
Company Overview: Bear Paw and OneOk
Inspecting pipe for defects, gouges, pits, dents, etc
In both steel and coating
Maintained a daily record of various measurements on the pipe during all phases of production
Worked on both the Final Steel Bench and The Coating Final Bench (platform) as well as overseeing the Load out yards Truck and Rail Car loading process
Observed and signed off on all tests including the Steel Labs Tensiles and Charpys as well as the Coating Labs CDT, DSC (Thermal Analysis) Scans, Profile Analysis, Flexibility, and Adhesion
Bear Paw and OneOk
Inspector
OMC International
Baton Rouge, LA
03.2011 - 05.2011
Inspecting pipe for defects, gouges, pits, dents, etc
In both steel and coating
Maintained a daily record of various measurements on the pipe during all phases of production
Submitted daily reports about the production for the day
Worked on both the Final Steel Bench and the Coating Final Bench (Platform)
Field supervisor
O.C. Communications
San Leandro, CA
09.2009 - 12.2010
Hold weekly meetings with employees to go over production numbers to help maintain the proper industry standards for installations
End of day reports on Microsoft Excel spreadsheets (i.e
Keeping and maintaining records of employees payroll and attendance as well as productivity in the field
Responsible for doing site surveys to verify serviceability for future installations
Responsible for training new employees, Field safety checks to make sure all employees were within OSHA standards, Installing and checking the proper equipment
Timeline
Project Supervisor/Chief Inspector
York County Natural Gas
08.2024 - 03.2025
NACE Coating Inspector / General Utility Inspector
Dominion
11.2019 - 11.2020
NACE Coating Inspector / General Utility Inspector
Synergy Inspections
05.2019 - 11.2019
Chief Inspector
Hawk Technical Services
02.2019 - 05.2019
NACE Coating Inspector / General Utility Inspector
Senior Operations Engineer - Focal Point at Comgás (Sao Paulo Gas Company) - the largest distributor of piped natural gas in Latin AmericaSenior Operations Engineer - Focal Point at Comgás (Sao Paulo Gas Company) - the largest distributor of piped natural gas in Latin America
Natural Gas Compression Mechanic/Pipefitting at Natural Gas Compressions Systems/ArchrockNatural Gas Compression Mechanic/Pipefitting at Natural Gas Compressions Systems/Archrock