Sean Nye
Conroe,TX
Summary
Team-oriented individual highly skilled in blueprint reading and commercial carpentry. Conscientious Carpenter focused on completing projects on time and exceeding client expectations. Dedicated Carpenter with 9 years of experience in carpentry and construction. Excels at analyzing and solving problems and systems knowledge. Dedicated to completing construction projects on time or ahead of schedule. Journeyman Carpenter knowledgeable in woodworking and repair work. Looking to bring further success to a company through excellent attention to detail and craftsmanship. Forward-thinking individual with commercial and residential window and door installation expertise. Offering more than 9 years of inspecting and repairing damage from dry rot. Highly trained Journeyman Carpenter offering excellent skills in managing teams, framing and wiring. Pursuing a similar position where an understanding of restoration services is highly sought. Quality-focused Carpenter committed to following safety code regulations. Timely and efficient working style takes difficult jobs through to completion within budget. Experienced in both residential and commercial construction. Perform detail-oriented and precise carpentry work with every job. Focused on outperforming customer expectations while accomplishing budget and timeline demands. Direct work of assistants while teaching common and advanced carpentry abilities. Talented Journeyman Carpenter offering over 9 years of experience in commercial construction environments. Well-organized planner with good multitasking and time management skills. Knowledgeable about both rough and finish carpentry techniques. Successful at managing supplies and site crews to lead safe and efficient projects.
Overview
9
9
years of professional experience
7
7
Certification
Work History
Journeyman Carpenter
Hensel Phelps
Houston, TX
11.2022 - Current
- Discarded debris and disposed waste to maintain cleanliness and quality standards.
- Planned and executed work with proper tools and materials to maximize productivity.
- Inspected job sites to identify potential hazards and establish protection and safety standards.
- Followed established job site safety regulations and maintained safe and clean work area.
- Demonstrated close attention to detail to verify quality and accuracy of work.
- Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls.
- Coordinated movement of materials and equipment to job sites.
- Planned projects by identifying necessary equipment, tools, and required assistance.
- Observed all OSHA and corporate safety regulations and procedures.
- Measured materials to determine sizes and quantity required for construction project.
- Planned and executed work with proper tools and materials to maximize efficiency.
- Measured and marked cutting lines on materials using pencil or chalk and marking gauge.
- Assisted with movement of materials and equipment to job sites.
- Followed protocols and stayed organized to provide personal and teammate safety.
- Specialized in foundations, framing and finish carpentry.
- Shaped or cut materials to specified measurements using hand tools, machines and power saws.
- Effectively used nails, screws, pneumatic nailing systems, concrete anchors, powder-actuated fasteners and framing connectors.
- Operated forklifts and other heavy equipment.
- Cut materials according to specifications in preparation for installation.
- Safely operated electric cordless and hammer drills and cutting torches.
- Prepared materials accurately using hand and power tools to make precise cuts.
- Cut and shaped materials to meet outlined measurements.
Journeyman Carpenter
FransenPittman
Englewood, CO
03.2018 - 10.2022
- Discarded debris and disposed waste to maintain cleanliness and quality standards.
- Planned projects by identifying necessary equipment, tools, and required assistance.
- Cut, shaped and installed siding, roofing and framing to protect interior of properties from harsh weather conditions.
- Assisted in training new carpenters to demonstrate techniques, apply best practices and comply with protocols and regulations.
- Installed and repaired woodwork, millwork and cabinetry.
- Observed all OSHA and corporate safety regulations and procedures.
- Measured materials to determine sizes and quantity required for construction project.
- Planned and executed work with proper tools and materials to maximize productivity.
- Developed and implemented new processes and procedures to improve productivity and workflow.
- Inspected job sites to identify potential hazards and establish protection and safety standards.
- Followed established job site safety regulations and maintained safe and clean work area.
- Demonstrated close attention to detail to verify quality and accuracy of work.
- Measured, drilled and sawed materials to perform successful home improvements.
- Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls.
- Read and interpreted blueprints, sketches and specifications to understand job.
- Collaborated with other construction workers to coordinate projects and streamline process.
- Supervised [Number] apprentices and offered specific recommendations to improve work quality.
- Completed installations of building structures, trim, flooring, and cabinetry.
- Read and interpreted blueprints to follow specifications of projects.
- Coordinated movement of materials and equipment to job sites.
- Organized project work by reading blueprints and assessing job specifications to determine optimal plans.
- Planned and executed work with proper tools and materials to maximize efficiency.
- Interpreted specifications and construction drawings to understand tasks necessary to complete each job.
- Measured and marked cutting lines on materials using pencil or chalk and marking gauge.
- Repaired damaged doors, windows and other structures.
- Installed insulation, trim and other finishing touches.
- Built and hung custom doors and frames.
- Assisted with movement of materials and equipment to job sites.
- Followed protocols and stayed organized to provide personal and teammate safety.
- Specialized in foundations, framing and finish carpentry.
- Shaped or cut materials to specified measurements using hand tools, machines and power saws.
- Installed and repaired woodwork, millwork, and cabinetry under supervision of master carpenter.
- Effectively used nails, screws, pneumatic nailing systems, concrete anchors, powder-actuated fasteners and framing connectors.
- Kept job site cleaned up properly and all debris disposed of in respective containers.
- Built flooring, window frames and countertops according to custom carpentry project specifications.
- Gained valuable education in residential and commercial building codes.
- Monitored tool and equipment condition and arranged repairs.
- Operated forklifts and other heavy equipment.
- Assembled and installed furniture and cabinetry.
- Cut materials according to specifications in preparation for installation.
- Safely operated electric cordless and hammer drills and cutting torches.
- Prepared materials accurately using hand and power tools to make precise cuts.
- Calculated dimensions and amount of needed materials by accurately measuring job site and structures.
- Installed drywall, ceilings, trim and fabricated replacement trim and moldings.
- Measured, cut and installed drywall, paneling and other materials.
- Managed inventory of tools, supplies and equipment.
- Inspected buildings to identify repair needs.
- Cut and shaped materials to meet outlined measurements.
- Facilitated harmonious working relationships with crew members to prevent problems and conflicts.
- Read and interpreted blueprints and construction documents to determine project directives.
- Interpreted blueprints and instructions to meet exact construction specifications.
Apprentice Carpenter
Mendel And Company Construction
Englewood, CO
03.2016 - 03.2018
- Planned and executed work with proper tools and materials to maximize efficiency.
- Interpreted specifications and construction drawings to understand tasks necessary to complete each job.
- Measured and marked cutting lines on materials using pencil or chalk and marking gauge.
- Repaired damaged doors, windows and other structures.
- Installed insulation, trim and other finishing touches.
- Built and hung custom doors and frames.
- Assisted with movement of materials and equipment to job sites.
- Followed established job site safety regulations and maintained safe and clean work area.
- Followed protocols and stayed organized to provide personal and teammate safety.
- Specialized in foundations, framing and finish carpentry.
- Completed installations of building structures, trim, flooring, and cabinetry.
- Shaped or cut materials to specified measurements using hand tools, machines and power saws.
- Installed and repaired woodwork, millwork, and cabinetry under supervision of master carpenter.
- Effectively used nails, screws, pneumatic nailing systems, concrete anchors, powder-actuated fasteners and framing connectors.
- Observed all OSHA and corporate safety regulations and procedures.
- Kept job site cleaned up properly and all debris disposed of in respective containers.
- Built flooring, window frames and countertops according to custom carpentry project specifications.
- Gained valuable education in residential and commercial building codes.
- Monitored tool and equipment condition and arranged repairs.
- Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls.
- Operated forklifts and other heavy equipment.
- Assembled and installed furniture and cabinetry.
- Cut materials according to specifications in preparation for installation.
- Safely operated electric cordless and hammer drills and cutting torches.
- Prepared materials accurately using hand and power tools to make precise cuts.
- Calculated dimensions and amount of needed materials by accurately measuring job site and structures.
- Installed drywall, ceilings, trim and fabricated replacement trim and moldings.
- Measured, cut and installed drywall, paneling and other materials.
- Managed inventory of tools, supplies and equipment.
- Cut and shaped materials to meet outlined measurements.
- Read and interpreted blueprints and construction documents to determine project directives.
- Planned and executed work with proper tools and materials to maximize productivity.
- Interpreted blueprints and instructions to meet exact construction specifications.
Laborer
Blueprint Skilled Services
Lakewood, CO
11.2015 - 03.2016
- Loaded, unloaded, and moved material to and from storage and production areas.
- Performed general housekeeping and cleaning tasks.
- Managed safe and efficient use of tools and equipment on construction sites.
- Moved and cleared debris from work sites to dispose of in designated areas.
- Followed proper equipment operation and maintenance procedures to keep equipment in good working condition.
- Worked alongside team to accomplish work goals according to schedule.
- Followed instructions and safety protocols while operating machinery and equipment.
- Provided labor support to carpenters, masons and other skilled trades.
- Helped with erecting scaffolding and ladders.
- Understood and followed verbal and written instructions to complete work correctly.
- Loaded and unloaded materials onto trucks and trailers.
- Assisted in digging, trenching and backfilling trenches and foundations.
- Prepared job sites by removing debris and setting up materials and tools.
- Loaded and unloaded materials and equipment onto and off construction sites.
- Mixed and poured concrete for variety of projects.
- Followed instructions and safety protocols to prevent accidents and injuries.
- Completed tear-down of existing structures to prepare for new construction.
- Used variety of hand and power tools to complete tasks.
- Dug trenches, backfilled holes and compacted earth to prepare for new construction.
- Organized materials, tools, and equipment to supply team members.
- Inspected tools and equipment to maintain safety and efficiency.
- Assembled and disassembled formwork to facilitate correct shaping and pouring of concrete.
Education
Journeyman of Carpentry - Carpentry
Construction Industry Training Council of Colorado
Denver, CO04.2020
GED -
Chaparral High School
Parker, CO2009
Skills
- Carpentry
- Drywalling
- Installation
- Carpentry and Woodworking
- Woodwork Restoration
- Hand Drywall
- Structure Assembly
- Precision and Accuracy
- Siding and Trim
- Project Layout
- Study Layout Diagrams
- Finishing Techniques
- Forming and Pouring
- Concrete Form Construction
- Demolition and Cleanup
- Equipment Rigging
- Stud Framing
- Work Crew Coordination
- Install Fixtures
- Power Tool Maintenance and Care
- Cabinet Building
- Structural Support Fabrication
- Site Maintenance
- Structural Knowledge
- Order Lumber
- Refinish Wood Surfaces
- Minor Plumbing and Welding
- Hand and Power Tool Operation
- Calculations and Measurements
- Residential and Commercial Renovations
- Cut Wood to Size
- Measure Distances
- Material Selection
- Blueprint Reading
- Drilling and Framing
- Power Saws
- General Laborer
- Cabinetry Installation
- Equipment Management
- Hammer Drills
- Exceptional Finish Carpentry Skills
- Stairs and Railings
- Form Systems Knowledge
- Heavy Lifting
- Material Prepping
- Carpenter's Levels
- Strong Analytical Skills
- Repair Work
- Apprentice Supervision
- Basic Plumbing Knowledge
- Maintaining Clean Work Areas
- Building Code Regulations
- Basic Electrical Knowledge
Certification
- Froklift Training - 2017- Current
- Skidsteer Training - 2017 - Current
- Excavating Training- 2017 - Current
- Osha 30 Training - 2017
- CPR/First Aid Training - 2017 - Current
- Journeymans Certification - 2020
Timeline
Journeyman Carpenter
Hensel Phelps
11.2022 - Current
Journeyman Carpenter
FransenPittman
03.2018 - 10.2022
Apprentice Carpenter
Mendel And Company Construction
03.2016 - 03.2018
Laborer
Blueprint Skilled Services
11.2015 - 03.2016
Journeyman of Carpentry - Carpentry
Construction Industry Training Council of Colorado
GED -
Chaparral High School