Shacor Cotman

Work History

Electrical Technician

ABB

Richmond, VA

11.2023 - Current

Applies safety rules and safe practices as well as environmental responsibilities. Reports unsafe practices and incidents
Contributes to customer satisfaction by planning and executing Service work according to customer order and expectation
Clear understanding of sense of urgency and care in the direct area of responsibility
Ensures customer retention by delivering superior customer experiences and effectively communicating service work timeline and expectations
While on site, work with the customer to identify opportunities for improving the customers operations and eliminating pain points
Utilize the local practices for notifying the account team of opportunities
Performs field service tasks, identifies technical problems and makes analysis through remote or on site activity in service categories and products for which they are certified to perform
Coaches associate technicians and associate engineers
Prepare material lists needed for service activity and ensures that all materials, parts and equipment are available and at the appropriate quality for Service activities
Prepares all documents and customer reports to be signed by the customer representative utilize all relevant tools
Reports work done in a timely manner and follows up when needed
Troubleshoot Equipment/Process failures and requests proactive corrective actions and makes recommendations to avoid repeating the problem in the future
Proactively plans and executes work on a first time right approach with customers and ensures the job is done on time and on quality
Identifies improvement needs and potential solutions for them in the way of working
Provides technical guidance to associates
Acts as trainer when needed, for field service associates and customers
Created detailed documentation of all repair processes including notes on product defects or malfunctions encountered during service calls.
Tested completed products to ensure compliance with safety regulations and industry standards.
Developed detailed testing procedures for new products to ensure quality control standards were met.
Assisted engineers in designing new products by providing feedback on design features and functionality.
Trained other technicians in the use of specialized diagnostic tools and software programs.
Documented repairs, inspections and testing for equipment in logging database.
Utilized SAP to process work orders, check stock quantity and place orders for parts.
Interpreted engineering diagrams to successfully troubleshoot faults.
Installed, diagnosed and disposed of uninterruptible power supply devices.
Operated and maintained computerized automated test equipment and special equipment test devices.
Evaluated and tested PDU, STS, and DPA products using measurement and diagnostic devices to adjust, test and repair equipment.
Leveraged outstanding communication, interpersonal and people skills to work well with clients.
Assembled and tested components, wiring and systems, locating and correcting faults to optimize production results.
Performed diagnostics and testing to locate root causes and resolve issues for optimal performance.
Assembled electrical systems or prototypes using hand tools or measuring instruments.

Electrical Technician

Eaton Corporation

Richmond, VA

01.2022 - 11.2023

Position and install component parts according to material list and blueprints.
Assembly includes a wiring task whereby it is necessary to stand, sit, bend and work from a ladder throughout the day.
Wire lugs are crimped on the end of the wire and are done with manual and automatic crimpers and strippers.
Execute Point-to-Point wiring diagrams in order to install electrical wiring. Routing of wire from one point to the other requires the ability to plan ahead and work from a schematic.
Able to work off ladders and in tight spaces.
Focus on quality, customer service, safety, productivity.
Performed routine maintenance on electrical systems such as motors, transformers, and generators.
Tested existing electrical components to ensure proper functioning.
Inspected all electrical components for damage or wear and tear.
Calibrated instruments used for testing purposes in order to maintain accuracy of readings.
Worked closely with other technicians to complete projects efficiently.
Reviewed blueprints and engineering drawings to determine project scope and objectives.
Conducted performance tests on newly installed equipment to ensure optimal operation.
Ensured that all work was completed in compliance with industry standards and regulations.
Repaired electrical equipment using hand and power tools and testing and diagnostic equipment.
Provided electrical services and control wiring for diverse locations.
Frequently worked overtime, weekends and holidays.
Tested energized and de-energized circuits, following test procedures and assisted in specialized test procedures.
Established outstanding relationships with electricians and consumers.
Collected and analyzed data and created reports based on findings.
Tested and repaired electric motors, variable frequency drives, alarms and control systems.
Climbed towers, worked in confined crawl spaces and worked flexible, non-standard workweek.
Performed diagnostics and testing to locate root causes and resolve issues for optimal performance.
Leveraged outstanding communication, interpersonal and people skills to work well with clients.
Read and interpreted technical manuals, drawings and schematics to make accurate repair decisions.
Conducted statistical studies to analyze or compare production costs for sustainable or nonsustainable designs.

Electrical Apprentice

Davis and Green

Richmond, VA

09.2020 - 01.2022

Clean or prepare construction sites to eliminate possible hazards
Signal equipment operators to facilitate alignment, movement or adjustment of machinery, equipment, or materials
Read and follow construction instructions or specifications to determine work activities
Used hand tools such as wire strippers, cutters to prepare wires for connections to boxes, terminals.
Connected cables from service entrance to meters and main distribution panel boards.
Identified problems with circuits or equipment using testing devices such as multimeters or oscilloscopes.
Worked with a variety of materials including PVC conduits, copper wiring, aluminum wiring and MC cables.
Cut openings in walls or floors to accommodate the passage of pipes or electrical conduit using power saws or cutting torches.
Installed ground fault circuit interrupter outlets per code requirements.
Pulled wires through conduit runs using fish tapes or pull strings when necessary.
Inspected transformers and circuit breakers to identify any potential issues before they become major problems.
Assembled junction boxes according to code requirements.
Maintained accurate documentation of all work performed.
Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
Worked in team-based environment to accomplish projects.
Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
Listened to directives of senior electrical professionals to complete efficient tasks.
Measured and prepared supplies for electrical tasks.
Completed semi-skilled and skilled work under supervision of fully qualified professionals.
Dug trenches and created holes to pull conduit and install supports.
Ensured compliance with relevant electrical and building codes throughout assignments.
Reviewed blueprints and electrical schematics to perform tasks to specifications.
Maintained organization, cleanliness and safety in work areas.
Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
Adhered to company standards and OSHA regulations for work site safety.
Kept work areas clean, neat and free of hazards.
Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
Inspected existing wiring to identify short circuits.
Kept work areas clean, neat and organized for efficient operations.
Verified measurements and made accurate cuts to avoid wasting materials on job sites.
Resolved issues with existing systems and replaced malfunctioning parts.
Demonstrated strong foundation of safety knowledge and implemented industry best practices.
Tested electrical systems to ensure proper functioning and safety.
Repaired faulty or damaged components on existing electrical systems.
Installed and maintained electrical wiring, equipment, and fixtures in accordance with local codes and regulations.
Read and interpreted blueprints, schematics, diagrams, and technical documents for installation of new systems.
Performed preventive maintenance procedures on electrical systems.
Replaced defective circuit breakers, fuses, switches, outlets, lighting fixtures and other components as needed.
Installed conduit systems including EMT, rigid conduit, flexible conduit.
Performed troubleshooting and diagnosis on malfunctioning systems or components.
Pulled insulated wires or cables through conduits to complete circuits.
Successfully installed leads and made cable connections for multiple motors, apparatus, and equipment.
Effectively utilized test equipment to diagnose and pinpoint faults in malfunctioning wiring.
Dismantled electrical components using hand tools to disconnect and restore wiring connections.
Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
Trained workers to install, maintain and repair electrical equipment and fixtures.
Planned layout and installation of wiring and fixtures based on project specifications and building codes.
Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
Reviewed blueprints to determine electrical component and wiring locations.
Collaborated with architects on electrical systems design for new construction.
Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
Optimized equipment configurations for peak performance.
Built controllers and panels to complete system installations.
Transported required supplies and employees from headquarters to job site using company vehicles.
Installed new electrical components, fixtures and motors.

Summary

Overview

Work History

Electrical Technician

Electrical Technician

Electrical Apprentice

Education

Electricity 1, And 2 -

Advanced Diploma - Electrcial

Electrician - Electrician

Skills

Additional Information

Graduation Date

Accomplishments

Languages

Affiliations

Certification

References

Timeline

Similar Profiles

Miguel ZambranaMiguel Zambrana

Charles HahneCharles Hahne

MiJamin KingMiJamin King