Summary
Overview
Work History
Education
Skills
Education and Training
Timeline
Generic

SHARIF CINTRON

andrews

Summary

Dedicated and adaptable professional with a proactive attitude, quick learner with strong work ethic and effective communication skills. Experienced and dependable general worker with a proven track record of efficiently completing tasks in various settings. Skilled in manual labor, equipment operation, and maintaining a clean and organized workspace. Safety-conscious individual, adapting to different environments. Experienced in electrical installations, maintenance, and troubleshooting, utilizing technical skills to ensure efficient electrical systems. Proven track record of delivering reliable solutions in diverse settings. Ready to contribute to a dynamic team and make a positive impact.

Overview

4
4
years of professional experience

Work History

I/E Compression Electrician I

Rouge Industrial Group
03.2025 - Current
  • Conducted routine inspections to identify electrical malfunctions and implement effective solutions.
  • Clear communication and detailed explanations of electrical work required and performed.
  • Work's well with others, willing to learn from more experienced tradesmen in order to broaden knowledge and understanding of trade.
  • Troubleshooting air compressor stations, replacing damaged control relay's, auto purge devices, faulty motors and damaged wiring.
  • Troubleshooting facility backup generators and preformed weekly PM's to ensure functionality of automated systems
  • Troubleshooting Flare VFD's, temperature controllers and temperature sensor devices.
  • Troubleshooting gas compressor stations, hot start's and lube pump motors.
  • Troubleshooting VRU station VFD cabinets and devices.
  • Troubleshooting glycol/chemical distribution systems.
  • Troubleshooting ATS cabinets and replaced damaged components.
  • Replacing fuses for utility lines, SDS panels, 480v circuits and below.
  • Installed voltage filter/harmonic devices for VFD cabinets.
  • On-call troubleshooting for device failure, replacements and utility power outages.
  • Ensured compliance with local electrical codes and safety regulations during all installations and repairs.
  • Worked from ladders and lifts to install, maintain, or repair electrical wiring and equipment.
  • Installed and wired electrical transformers, service panels, and circuit breakers.
  • Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
  • Preformed routine inspections of electrical equipment and devices to identify hazards, defects, and repair requirements on various electrical systems.
  • Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and ammeters.
  • Preformed quality control by inspecting condition of equipment and tools, storing and maintaining equipment for each job.
  • Demonstrated proficiency with various hand tools, power tools and electrical measuring devices.
  • Reduced downtime for clients by quickly diagnosing and repairing complex electrical issues.
  • Collaborated with construction teams to ensure seamless integration of electrical systems within new builds.
  • Developed strong working relationships with clients through professionalism, reliability, and transparency during projects.
  • Coordinated with other tradesmen seamlessly during large-scale installations or renovations to ensure smooth project progressions.
  • Achieved client satisfaction by prioritizing open communication throughout project stages.
  • Provided exceptional customer service through clear communication, accurate estimates, and timely project completion.
  • Interpreted blueprints and technical diagrams to ensure accurate installation of electrical components.
  • Contributed to safer work environments by following safety protocols and conducting regular risk assessments.
  • Coordinated with construction teams to ensure electrical work was done in alignment with overall project timelines.
  • Supported emergency response efforts, rapidly addressing electrical outages and hazards to minimize impact on businesses.
  • provided timely and effective troubleshooting for electrical issues, leading to minimal disruption.
  • Repaired malfunctioning systems and components.
  • Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
  • Replaced and repaired electrical control and distribution equipment.
  • Installed safety and distribution components for electrical systems, such as E-Stops, switches, circuit-breaker's, distribution panel's.
  • Interpreted drawings, wiring diagrams, flow charts, PDF manual's and written descriptions of project requirements.
  • Examined electrical units for loose connections and broken insulation.
  • Fabricated custom and replacement parts according to specifications, using hand tools.
  • Installed 120/277 volt systems and 480 volt systems.

Electrician

Delta Peak Integrated LLC.
04.2023 - 10.2024
  • Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
  • Tested continuity of circuits with testing devices such as ohmmeters, voltmeters and ammeters.
  • Inspected electrical equipment and systems to identify hazards, defects and the need for adjustment or repair.
  • Repaired or replaced worn or defective parts using hand tools and power tools.
  • Connected wires to circuit breakers, transformers or other components.
  • Ensured that all work was completed in accordance with applicable codes.
  • Identified problems with electrical systems by observing operation, listening for problems and using test equipment such as multi-meters.
  • Resolved safety issues related to faulty wiring installation practices in a timely manner.
  • Worked on high voltage switchgear projects involving transformer hookups and terminations up to 15kv level.
  • Responded quickly to emergency calls regarding electrical malfunctions.
  • Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
  • Conducted troubleshooting operations on complex industrial machinery requiring advanced knowledge of electricity.
  • Installed grounding system per NEC code requirements.
  • Diagnosed malfunctioning systems using schematics diagrams and test instruments such as digital multimeters.
  • Installed conduit, wire and motor controls.
  • Traced and diagnosed electrical malfunctions using hand tools and test equipment.
  • Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
  • Diagnosed issues in electrical circuits and equipment and took proper corrective or preventive measures for repair.
  • Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
  • Worked extensively on three-phase, 277/480 volt power distribution systems.
  • Interpreted blueprints and technical drawings to correctly assemble panels and control boxes.
  • Assessed, tested and operated variety of electrical components and systems.
  • Tested entire electrical assembly for performance levels and safety concerns.
  • Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
  • Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
  • Evaluated electrical systems, equipment, and components to identify and resolve defects and safety risks.
  • Responded to emergency callbacks and provided onsite support.
  • Diagnosed malfunctioning systems, apparatus and components to locate cause of breakdowns and correct problems.
  • Contributed to various projects, providing value to department, company and client base.
  • Troubleshot EMCS and variable frequency drive systems to correct and rectify issues.
  • Performed troubleshooting and diagnosis on malfunctioning systems or components.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Installed leads and connected cables to motors, apparatus and equipment.
  • Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
  • Diagnosed malfunctioning wiring using test equipment to locate faults.
  • Dismantled electrical components using hand tools to disconnect and restore wiring connections.
  • Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
  • Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
  • Trained workers to install, maintain and repair electrical equipment and fixtures.
  • Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
  • Fabricated parts according to specifications using hand and power tools.
  • Advised management on issues of safety in continued equipment operation.

Apprentice Electrician

Expanse Electrical LLC.
12.2021 - 04.2023
  • Installed electrical wiring and fixtures, such as outlets, switches, circuit breakers, junction boxes and wall sockets.
  • Performed general maintenance on electrical systems including replacing worn parts and repairing faulty wiring.
  • Measured, cut and bent wire and conduit using hand tools and power tools.
  • Assembled conduits by threading ends together with couplings or clamps.
  • Followed all safety procedures when handling hazardous materials such as high voltage electricity.
  • Repaired electric motors, pumps, fans.
  • Worked with relay logic circuits.
  • Assisted in troubleshooting problems with various types of control systems.
  • Installed lighting fixtures such as fluorescent bulbs or LED lights.
  • Observed safety regulations while working on energized systems.
  • Used specialized diagnostic tools to locate faults in complex electrical systems.
  • Replaced defective circuit breakers or fuses when necessary.
  • Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
  • Supported journeyman and master electricians in maintaining, operating and repairing electrical systems.
  • Worked in all weather conditions and on multiple types of ladders and mechanical lifts.
  • Worked in team-based environment to accomplish projects.
  • Completed semi-skilled and skilled work under supervision of fully qualified professionals.
  • Installed new electrical components, fixtures and motors.
  • Listened to directives of senior electrical professionals to complete efficient tasks.
  • Gathered required tools and equipment for each task to increase efficiency.
  • Dug trenches and created holes to pull conduit and install supports.
  • Measured and prepared supplies for electrical tasks.
  • Reviewed blueprints and electrical schematics to perform tasks to specifications.
  • Kept work areas clean, neat and free of hazards.
  • Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
  • Followed relevant electrical and building codes for each job.
  • Connected wires to circuit breakers, transformers, or other components.
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Installed leads and connected cables to motors, apparatus and equipment.
  • Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
  • Dismantled electrical components using hand tools to disconnect and restore wiring connections.
  • Addressed and resolved worksite safety hazards to reduce risk.
  • Fabricated parts according to specifications using hand and power tools.

Education

High School Diploma -

Murry Bergtraum High School For Business Careers
New York, NY
05-2012

Skills

  • Teamwork and Collaboration
  • Verbal Communication
  • Dependable and Responsible
  • Quality assurance
  • Electrical repairs
  • Emergency repairs
  • Electrical installation
  • Electrical troubleshooting
  • Lighting systems
  • Fixture installation
  • Electrical panel upgrades
  • Electrical equipment maintenance
  • Wiring diagrams
  • New construction
  • Voltmeter use
  • Attention to detail
  • Project management
  • Field installation
  • Low-voltage systems
  • Sub-panel installation
  • Quality Assurance
  • Organization
  • Basic Math
  • Conflict Resolution
  • Decision-Making
  • Self-Directed
  • Planning
  • Critical Thinking
  • Customer Service
  • Public Speaking
  • Multitasking
  • Scheduling
  • Organizational Skills

Education and Training

other

Timeline

I/E Compression Electrician I

Rouge Industrial Group
03.2025 - Current

Electrician

Delta Peak Integrated LLC.
04.2023 - 10.2024

Apprentice Electrician

Expanse Electrical LLC.
12.2021 - 04.2023

High School Diploma -

Murry Bergtraum High School For Business Careers

Similar Profiles

CREATE PROFILE