Electrical and Utility Inspector for pipeline, laterals, and various oil and gas facilities. Superintendant for a large electrical contracting company building various facilities in the oil and gas industry. Skilled and organized Maintenance Tech with more than 10 years in building maintenance. Possess in-depth knowledge of maintenance, troubleshooting and repair procedures in all areas of facility and mechanical systems for Industrial, commercial and residential buildings. Electrician with over 20 years commercial, residential, and industrial experience, as well as experience in the gas and oil industry. Adept at electrical installations and maintenance and repairs in homes, plant facilities, factories, and gas and oil locations.
Overview
25
25
years of professional experience
1
1
Certification
Work History
Owner/Operator
Lehr Electric
Guymon , OK
11.2020 - Current
Managed day-to-day business operations.
Maintained up-to-date administrative records to monitor operational conditions.
Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code.
Analyzed blueprints to diagnose potential electrical hazards and carry out risk assessments prior to starting new jobs.
Installed and wired electrical transformers, service panels, and circuit breakers.
Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
Instrumentation & Electrical Inspector
Representing Exxon Mobile
Carlsbad, NM
06.2019 - 05.2020
Maintained excellent attendance record, consistently arriving to work on time
Resolved conflicts and negotiated mutually beneficial agreements between parties
Increased customer satisfaction by resolving electrical installation issues
Inspected medium and low voltage installations ensuring that all Exxon Mobile specifications and NEC requirements were met
Resolved several issues with electrical design flaws
Documented all hipot and meggar testing
Documented all instrumentation calibration
Ensured that all terminations were correct
Oversaw entire electrical and instrumentation installation from start-up to commissioning
Utility Inspector
Representing Phillips 66
Tulsa, OK
02.2019 - 05.2019
Checked quality of construction and worksite policies
Reviewed drawings and assessed construction against plans
Inspected stringing process for safety
Made sure all pipe was delivered damage free
Inspected over trenching process for correct depth and safety
Inspected lowering in process making sure product was of good quality
Instrumentation And Electrical Inspector
Onshore Quality Control Specialists, LLC
Austin, TX
11.2017 - 02.2019
Instrumentation and Electrical inspector involved in the start up and completion of four Mid Stream facilities
Extensive knowledge of National Electric code and common industrial electrical practices and installations
Knowledge of low voltage and medium voltage applications, practices, safety, and equipment
Oversaw several hydrostatic tests
Oversaw civil work at project startup
Reviewed and implemented all job specs and National Electric codes
Assisted and coordinated third party contractors during testing and commissioning
Coordinated utility service providers according to project schedules
Performed and documented regular jobsite observations to provide direction for all general contractor personnel
Worked with construction administration to plan field observations and keep production on schedule
Prepared punch lists and ensured that all requirements were met before the job was closed out
Oversaw the entire building turnover process while enhancing communication between all construction management
Offered technical assistance to all construction personnel and service providers
Reported the quality of performance on site to all construction managers
Conducted routine quality audits to ensure that work was progressing per the specifications and codes and initiated corrective action
Supported construction management and operations in emergency repairs and operation procedures for all pipeline systems and equipment
Evaluated construction design information such as detail and assembly drawings, design calculations, specification and code compliance, system layouts and design
Facilitated work site safety by applying knowledge of safety protocol and awareness of potential hazards
Consistently assumed additional responsibilities and worked extended hours to meet project deadlines
Electrical/Utility Inspector
McDaniels Technical Services Inc
Broken Bow, Oklahoma
11.2016 - 11.2017
Reviewed plans and specs during the schematic design of pre-construction
Coordinated utility service providers according to project schedules
Skilled in trenching, lowering in, potholing, boring, bolt up and torqueing procedures
Conducted weekly production and operations contractor meetings, which facilitated stronger communication and the ability to resolve critical issues
Performed regular job site observations to provide direction for all general contractor personnel
Worked with construction administration consultants to plan field observations on schedule
Digitally archived weekly progress and technical “Knowledge Base” photographs of all assigned projects
Prepared and followed through on all required punch lists
Oversaw the entire building turnover process, while enhancing communication between all construction management
Provided safety kits to all construction personnel, which complied with safety protocols for the job site
Prepared regular interval progress reports
Offered technical assistance to service providers
Reported the quality of performance on site to all site construction managers
Conducted routine quality audits to ensure that work was progressing per the specifications and initiated corrective actions
Guided and directed third-party inspectors through project construction, commissioning and closeout
Avoided construction delays by efficiently following through with all site inspections in a timely manner
Supported construction management in emergency repair and restoration on oil pipeline systems and equipment
Conducted site visits to plan the locations of equipment and interconnection to the site existing electrical system
Evaluated construction design information such as detail and assembly drawings, design calculations, system layouts and sketches or specifications
Provided technical support during construction, startup, testing, system commissioning and performance monitoring
Obtained, updated, and maintained standard operating procedures
Inspected industrial and municipal facilities to ensure compliance
Electrical Superintendant
Pyramid Instrumentation and Electric
Grand Junction, CO
11.2014 - 11.2016
Job Duties consist of only Industrial Electrical and Instrumentation for gas and oil industry and some production factory environments
Build and field wire PLC's and troubleshoot after programming
Cut , thread and run GRC conduit systems for all hazardous location classes
Mount, wire, adjust, and calibrate various instruments
Build electrical services up to 2000 amperes
Install, test, troubleshoot, and maintain heat trace systems
Coordinated utility service providers according to project schedules
Obtained building and specialty permits from local jurisdictional agencies
Determined the project schedule, which included the sequence of all construction activities
Prepared regular interval progress reports
Scheduled all contractors and materials deliveries
Ensured proper installations through accurate reading of blueprints
Followed standards and procedures to maintain safe work environment
Director of Maintenance and Transportation
Wiley School District
Wiley, CO
04.2010 - 06.2014
As Director of Maintenance my duties include; maintaining all electrical, plumbing, mechanical systems throughout the campus; over see custodial crews, maintain all department budgets, and help with planning for all new construction projects
As Director of Transportation my duties consisted of the planning of all routes, implementing all state and federal regulations, and general upkeep of all fleet vehicles
Structural Trades II
Lamar Community College
Lamar, CO
02.2004 - 04.2010
Support to the physical plant to insure heat, air conditioning, boilers, pumps, motors, lights, mechanical and pneumatic equipment function properly for safety, comfort, and well being of the occupants; assure that mechanical equipment related to heating and air conditioning are working properly and make adjustments and repairs as necessary
I monitor and make changes to the building automation systems; assure plumbing is in proper working order by cleaning drains and making minor repairs of leaking, damaged or broken components; assure that electrical equipment is functioning properly by inspecting and making repairs or replacing units that have burned or worn out; assure facilities are kept up by replacing floor and ceiling tiles, repairing roofs, floors, walls and related equipment; analyze closed water and steam systems by testing and adding chemicals to prevent corrosion; re
Master Electrician
Grett Electrical Contracting
Lamar, CO
06.1998 - 02.2004
Duties included all aspects of the electrical trade
Capable of taking a job from a set of blueprints to a finished product
Proficient in but not limited to supervision, planning and layout, control wiring, trouble shooting, motors, electrical circuitry and phasing, single and three phase systems, alarm systems, transformers, surge suppressors, underground installations, overhead installations, motor control centers, pump panels, and the installation of electrical services from meters to main distribution panels, and sub-panels
Apprentice Electrician
Hartford Electric
Longmont, CO
03.1996 - 05.1998
Job duties included all phases of the electrical trade, but mainly consisted of wiring new houses, remodels, apartments and condos
Limited time wiring commercial and industrial installations
Education
High School Diploma - General Studies
Skyline High School
1988
University of Wyoming
Skills
Consistently meet goals
Efficient multi-tasker
Project management
Organized
Instrumentation skill and knowledge
Detail-oriented
Motivated self-starter
Multi-tasking
Subcontractor management
OSHA Certified
Strong knowledge of National Electric Code (NFPA 70)
Architectural and electrical drawings interpretation
Control circuit troubleshooting
Relays and pressure switches
Electrical provisions installation
Electrical panel upgrades
Knowledgeable in construction safety
Strong industrial electric skill and knowledge
Proficient in low and medium voltage installations