SHAWN MCCARTNEY
Halifax,MA
Summary
Highly-motivated employee with desire to take on new challenges. Strong work ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills.
Overview
17
17
years of professional experience
Work History
Quality Supervisor
SRC Medical, Inc
Hanover, MA
12.2016 - Current
- Developed and implemented quality control processes to improve product reliability.
- Monitored production activities for conformance with established standards.
- Conducted training sessions for employees on quality assurance procedures and methods.
- Performed root cause analysis of non-conforming products and identified corrective actions.
- Analyzed customer feedback to identify areas of improvement in the product design process.
- Documented inspection results, maintained records, and reported on data trends.
- Conducted audits of suppliers and vendors to ensure compliance with quality standards.
- Investigated complaints from customers regarding product defects or malfunctions.
- Reviewed test results, inspected finished products, and monitored production operations for compliance with specifications.
- Created detailed reports summarizing quality assurance findings and provided recommendations for improvement.
- Established metrics to measure the effectiveness of existing quality control systems.
- Developed standard operating procedures for various aspects of the production process.
- Audited supplier performance against contractual obligations related to quality requirements.
- Enforced adherence to industry standards by monitoring employee performance during inspections.
- Audited production floor and monitored metrics, verified adherence to standard work instructions and corrected deficiencies.
- Conducted inspections with quality control team members.
- Checked calibration certificates and administered system to keep instrumentation accuracy compliant with known standards.
- Kept records of quality reports and statistical reviews.
Hand Finisher/Quality Control Inspector
Smith & Nephew, Inc
Mansfield, MA
10.2013 - 12.2013
- Polished product surfaces with abrasive materials and tools.
- Filed, scraped, sanded, and polished rough edges of metal and plastic parts.
- Inspected pieces for defects before proceeding with finishing process.
- Measured dimensions of completed items to verify conformance to specifications.
- Assembled small components onto large assemblies after completion of finishing process.
- Conducted routine maintenance checks on all equipment used in the finishing area.
- Maintained inventory levels of supplies required for hand-finishing operations.
- Followed safety protocols while operating machinery or working with hazardous chemicals.
- Inspected finished products for quality and adherence to customer specifications.
- Kept work areas clean, neat and free of safety hazards to maximize efficiency.
- Worked with grinding, polishing and cutting tools to give products smooth finish.
- Adhered to blueprints and production specifications to complete high-quality work.
- Filed grooved, contoured and irregular surfaces of metal objects to meet blueprint specifications.
- Inspected products for defects and conformance to customer specifications using precision measuring instruments.
- Verified accuracy of product labels, including expiration dates and lot numbers.
- Tested finished goods prior to shipment according to established protocols.
- Analyzed plans, specifications and blueprints to understand product requirements.
- Compared product and materials colors, shapes, textures and grades with predetermined templates.
Power Equipment Technician
Gillis Equipment
Hanson, MA
04.2012 - 12.2012
- Performed preventive maintenance on a variety of complex machinery and equipment.
- Inspected and tested malfunctioning equipment to diagnose faults and malfunctions.
- Used hand tools, power tools and diagnostic equipment to troubleshoot problems with mechanical components.
- Assembled new pieces of equipment following blueprints or other instructions from manufacturers' manuals.
- Completed standard inspections to assess wear and damage to vehicles.
- Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
- Overhauled and repaired equipment such as tractors and harvesters to maintain efficient farm operations.
Off Lease Inspector
SGS Automotive Services
Cincinnati, OH
01.2010 - 05.2011
- Assessed damaged property to determine the extent of damage and develop repair estimates.
- Prepared detailed reports on findings that included photographs, diagrams, and estimated costs for repairs.
- Identified and collected evidence and determined value to specific claim to properly assess conditions.
- Documented vehicle damage and condition by taking meticulous notes and photographs.
- Determined salvage value for total-loss vehicles.
Electrical Apprentice
Wayne Thomas Electrician
Nantucket, MA
09.2007 - 09.2009
- Installed and maintained electrical wiring, equipment, and fixtures in accordance with local codes and regulations.
- Tested electrical systems to ensure proper functioning and safety.
- Repaired faulty or damaged components on existing electrical systems.
- Read and interpreted blueprints, schematics, diagrams, and technical documents for installation of new systems.
- Performed preventive maintenance procedures on electrical systems.
- Replaced defective circuit breakers, fuses, switches, outlets, lighting fixtures and other components as needed.
- Installed conduit systems including EMT, rigid conduit, flexible conduit.
- Used hand tools such as wire strippers, cutters to prepare wires for connections to boxes, terminals.
- Connected cables from service entrance to meters and main distribution panel boards.
- Worked with a variety of materials including PVC conduits, copper wiring, aluminum wiring and MC cables.
- Cut openings in walls or floors to accommodate the passage of pipes or electrical conduit using power saws or cutting torches.
- Installed ground fault circuit interrupter outlets per code requirements.
- Pulled wires through conduit runs using fish tapes or pull strings when necessary.
- Assembled junction boxes according to code requirements.
- Installed new electrical components, fixtures and motors.
- Dug trenches and created holes to pull conduit and install supports.
- Installed leads and connected cables to motors, apparatus and equipment.
- Dismantled electrical components using hand tools to disconnect and restore wiring connections.
- Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
- Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
- Reviewed blueprints to determine electrical component and wiring locations.
Education
Lead Auditor Training - Lead Auditor ISO 13485:2016
Oriel Stat A Matrix
Boston, MA09-2018
High School Diploma -
Silver Lake Regional High School
Kingston, MA05-1988
Auto Body Repair -
Silver Lake Regional High School
Kingston, MA05-1988
Some College (No Degree) - Automotive Damage Appraisal
Northeastern University
Boston, MASkills
- ISO Standards
- Focused on quality in ISO 13485:2016
- Lead QMS Auditing
- Non Conforming Material Reports And Corrective and Preventative Actions
- Precision Measurement Instruments such as: Calipers, Micrometers, Comparators, Dial Indicators, Height Gauges, Digital Force Gauges Go/No Go Gauges
- Product and Component Inspection
- FDA QSR CFR21 Part 820
- SOP Writing and Process Mapping in risk based systems
- Electrical Experience
- Generator and Transfer Switch Installation
- Automotive and Motorcycle Repair
- Hand and Power Tools
- Blueprint and Diagram Reading
- Engine Maintenance and Rebuilding using manuals and detailed diagrams
- Motorcycle Suspension rebuilding and tuning
Affiliations
Hobbies including High fidelity stereo and speaker design and building. Designing and testing passive crossovers in speaker systems. Collecting vintage stereo and speakers. Riding motorcycles. Maintaining and repairing motorcycles and automobiles.
Timeline
Quality Supervisor
SRC Medical, Inc
12.2016 - Current
Hand Finisher/Quality Control Inspector
Smith & Nephew, Inc
10.2013 - 12.2013
Power Equipment Technician
Gillis Equipment
04.2012 - 12.2012
Off Lease Inspector
SGS Automotive Services
01.2010 - 05.2011
Electrical Apprentice
Wayne Thomas Electrician
09.2007 - 09.2009
Lead Auditor Training - Lead Auditor ISO 13485:2016
Oriel Stat A Matrix
High School Diploma -
Silver Lake Regional High School
Auto Body Repair -
Silver Lake Regional High School
Some College (No Degree) - Automotive Damage Appraisal
Northeastern University
Similar Profiles
Tiana SosaTiana Sosa
General Manager at SRC Care HomesGeneral Manager at SRC Care Homes
Sarina MedinaSarina Medina
Custom Apparel Coordinator / Safety PPE Coordinator at SRC SupplyCustom Apparel Coordinator / Safety PPE Coordinator at SRC Supply
Kiel MartinKiel Martin
Operations Supervisor at SRC LogisticsOperations Supervisor at SRC Logistics
Danielle MylettDanielle Mylett
Individualized Community Connector at Momentum - South Shore Supports ServicesIndividualized Community Connector at Momentum - South Shore Supports Services
Cassidy PattenCassidy Patten
Office Manager/ Bookkeeper/ Executive Assistant at Elliott Investments LLCOffice Manager/ Bookkeeper/ Executive Assistant at Elliott Investments LLC