Summary
Overview
Work History
Education
Skills
Certification
Languages
References
Timeline
Generic

SHAWN NICKELL

Carthage,USA

Summary

Dynamic and results-oriented oilfield and pipeline inspection professional with extensive experience. Demonstrated expertise in weld integrity evaluation and leadership of RT crews, resulting in improved project efficiency and enhanced safety standards. Proficient in fostering team collaboration and implementing innovative solutions to complex challenges while maintaining compliance and high-quality standards across diverse projects. Career aspirations include further advancing safety protocols and quality assurance in the industry.

Overview

28
28
years of professional experience
1
1
Certification

Work History

General Oilfield Inspector

KNX
03.2020 - Current
  • Identified any potential hazards or areas that needed improvement through visual inspection and testing.
  • Approved incoming materials by confirming specifications and conducting measurement tests.
  • Ensured all products met industry-standard requirements before being released for sale.
  • Collaborated with other departments to troubleshoot problems, develop solutions, and implement corrective action plans.
  • Inspected, tested and measured materials for conformance to specifications and regulatory requirements.
  • Generated detailed reports outlining inspection and testing results.
  • Matched arriving materials with purchase orders, submitted discrepancy forms as necessary.
  • Coordinated with engineers and architects to resolve compliance issues discovered during inspections.
  • Filled out and submitted logs and paperwork on-time.
  • Participated in training to strengthen and develop inspector competencies.
  • Documented all inspection results accurately in accordance with established guidelines.
  • Reported and tracked deviations from quality standards and recommended corrective action to appropriate personnel.
  • Recommended essential corrective actions based on test results.
  • Rejected products and materials failing to meet expectations.
  • Assisted in training new inspectors on safety protocols and standards.
  • Identified acceptable components and rejected defective products.
  • Reviewed supplier documentation and ensured it was compliant with relevant regulations.
  • Documented inspection findings, prepared comprehensive reports, and communicated results to stakeholders.
  • Marked materials with grade or acceptance status.
  • Verified inventory count accuracy by cross-referencing physical counts against computerized records.
  • Provided safety information to contractors, engineers, or test equipment operators.
  • Maintained accurate records of all tests conducted during the inspection process.
  • Noted changes during testing in project documentation.
  • Compiled reports outlining findings from each inspection performed.
  • Monitored production processes to detect deviations from specifications or standards.
  • Managed and resolved conflicts arising from inspection findings, negotiating between parties to achieve compliance.
  • Identified production concerns and worked with supervisors to understand and remedy situations.
  • Notified supervisors or other relevant personnel of test or production issues.
  • Performed visual and NDT inspections using established tools to identify defects.
  • Read blueprints and manuals to determine test procedures or adjustment methods.
  • Managed inventory and supplies to ensure materials were available when needed.
  • Managed time effectively to ensure tasks were completed on schedule and deadlines were met.
  • Worked effectively in team environments to make the workplace more productive.

Welding/Pipeline Utility Inspector

Texray
03.2020 - Current
  • Evaluated whether work was in accordance with all applicable city, state and federal guidelines, as well as applicable discipline-specific codes.
  • Conducted site pre-inspections and coordinated post-construction audits.
  • Collaborated with contractors to ensure proper operation of all components within the system.
  • Verified accuracy of engineering drawings prior to commencement of construction project.
  • Reviewed permits, applications, and related records for each worksite.
  • Checked records related to permits, licenses and insurance policies for each contractor working on a project.
  • Monitored contractor's activities while performing repairs or installations on utilities systems.
  • Responded promptly to emergency situations related to utilities systems failure or malfunctioning equipment.
  • Documented findings from inspections and reported them to management team.
  • Maintained accurate documentation pertaining to all inspections conducted as well as results obtained from them.
  • Performed inspections of current construction, refurbishment, and repair projects.
  • Evaluated construction quality and company policies.
  • Conducted field tests to assess performance of equipment and materials used in construction projects.
  • Completed investigations into complaints, incidents and accidents at work sites.
  • Noted recurrent issues and worked with contractors to prevent re-occurrence.
  • Maintained up-to-date knowledge of inspection techniques, codes, ordinances and regulations.
  • Analyzed data collected during inspections to determine if corrective actions are needed.
  • Gave information about methods and materials to correct problems and bring construction in compliance with ordinances and codes.
  • Read and interpreted drawings and assessed construction against plans.
  • Developed reports detailing defects found during inspections as well as any recommended corrective actions or preventive measures taken in response.
  • Ensured that all work performed by contractors is done according to applicable standards.
  • Documented violations and issued documentation such as stop work orders to contractors or owners.
  • Identified non-conformance issues associated with underground utility installation and provided recommendations for improvement.
  • Assisted with customer requests and answered questions to improve satisfaction.
  • Prioritized and organized tasks to efficiently accomplish service goals.
  • Worked effectively in team environments to make the workplace more productive.
  • Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
  • Managed time effectively to ensure tasks were completed on schedule and deadlines were met.
  • Managed inventory and supplies to ensure materials were available when needed.
  • Collaborated closely with team members to achieve project objectives and meet deadlines.
  • Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.

Welding/Pipeline Utility Inspector

Delek Logistics
01.2018 - 03.2020
  • Completed inspections on utilities to assess safety and compliance with applicable regulations.
  • Evaluated whether work was in accordance with all applicable city, state and federal guidelines, as well as applicable discipline-specific codes.
  • Assessed compliance or violations and reported findings.
  • Conducted site pre-inspections and coordinated post-construction audits.
  • Collaborated with contractors to ensure proper operation of all components within the system.
  • Verified accuracy of engineering drawings prior to commencement of construction project.
  • Reviewed permits, applications, and related records for each worksite.
  • Checked records related to permits, licenses and insurance policies for each contractor working on a project.
  • Monitored contractor's activities while performing repairs or installations on utilities systems.
  • Responded promptly to emergency situations related to utilities systems failure or malfunctioning equipment.
  • Documented findings from inspections and reported them to management team.
  • Maintained accurate documentation pertaining to all inspections conducted as well as results obtained from them.
  • Performed inspections of current construction, refurbishment, and repair projects.
  • Evaluated construction quality and company policies.
  • Provided technical advice regarding design, installation, repairs, maintenance and upgrades of various utility systems.
  • Conducted field tests to assess performance of equipment and materials used in construction projects.
  • Noted recurrent issues and worked with contractors to prevent re-occurrence.
  • Maintained up-to-date knowledge of inspection techniques, codes, ordinances and regulations.
  • Analyzed data collected during inspections to determine if corrective actions are needed.
  • Gave information about methods and materials to correct problems and bring construction in compliance with ordinances and codes.
  • Read and interpreted drawings and assessed construction against plans.
  • Developed reports detailing defects found during inspections as well as any recommended corrective actions or preventive measures taken in response.
  • Ensured that all work performed by contractors is done according to applicable standards.
  • Documented violations and issued documentation such as stop work orders to contractors or owners.
  • Identified non-conformance issues associated with underground utility installation and provided recommendations for improvement.
  • Prioritized and organized tasks to efficiently accomplish service goals.
  • Maintained updated knowledge through continuing education and advanced training.
  • Worked effectively in team environments to make the workplace more productive.
  • Managed time effectively to ensure tasks were completed on schedule and deadlines were met.
  • Managed inventory and supplies to ensure materials were available when needed.
  • Collaborated closely with team members to achieve project objectives and meet deadlines.
  • Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.

Pump Operator

Nichols Oil Tools
03.2017 - 12.2017
  • Monitored gauges and flowmeters to inspect equipment and reported abnormalities.
  • Verified that all fluid levels were within acceptable limits prior to start-up.
  • Performed preventative maintenance on pump systems according to schedule.
  • Responded promptly to emergency situations involving pumping systems.
  • Paid close attention to operations schedules and timelines to achieve targets and maintain optimal productivity levels.
  • Identified potential safety hazards associated with the operation of pumps.
  • Collaborated with coworkers to update safety practices and uphold effective safety behaviors.
  • Instructed personnel on proper usage of pumps during training sessions.
  • Adjusted pump settings to maintain desired flow rates and pressures.
  • Troubleshot mechanical, electrical, and hydraulic issues with pumps.
  • Connected pump hoses and pipelines to transfer material.
  • Inspected valves, seals, gaskets, couplings, and other components for wear or damage.
  • Lubricated and maintained machines prior to setup, calibration and operation.
  • Operated and monitored pumps to ensure proper functioning.
  • Replaced worn or damaged parts in pump systems as needed.
  • Cleaned strainers, filters, tanks, piping systems, and other related components.
  • Executed scheduled shutdowns of pumps in accordance with established procedures.
  • Monitored gauges and pressure pumps throughout tasks to check safety and operational performance.
  • Repaired faulty wiring connections in control panels and junction boxes.
  • Monitored pump performance using gauges, alarms, and other instruments.
  • Ensured compliance with safety regulations when operating pumping equipment.
  • Conducted routine inspections of pumps and related equipment.
  • Responded to emergency situations with calm, professionalism and skill to address and resolve issues and return pump function to ideal levels.
  • Approached customers and engaged in conversation through use of effective interpersonal and people skills.
  • Conducted routine maintenance and repairs on mechanical systems and industrial equipment.
  • Worked effectively in team environments to make the workplace more productive.
  • Completed day-to-day duties accurately and efficiently.
  • Completed routine maintenance and repair.
  • Operated a variety of machinery and tools safely and efficiently.
  • Operated equipment and machinery according to safety guidelines.
  • Conducted system analysis and testing to identify and resolve technical issues or inefficiencies.

Owner

J&S Mechanical
07.2009 - 12.2017
  • Negotiated with vendors to gain optimal pricing on products resulting in substantial increase in profit margin.
  • Set pricing structures according to market analytics and emerging trends.
  • Ensured compliance with local, state, and federal regulations.
  • Provided direction and guidance to employees.
  • Delegated work to staff, setting priorities and goals.
  • Oversaw project execution, phase progress, workmanship, and team performance to drive on-time completion of deliverables.
  • Monitored progress by establishing plans, budgets and measuring results.
  • Conducted performance reviews for employees on a regular basis.
  • Trained new inspectors on proper inspection techniques, safety protocols, and regulatory compliance.
  • Matched arriving materials with purchase orders, submitted discrepancy forms as necessary.
  • Rejected products and materials failing to meet expectations.
  • Filled out and submitted logs and paperwork on-time.
  • Performed visual and NDT inspections using established tools to identify defects.
  • Oversaw disposal of products, materials and equipment not in compliance with tolerances, safety standards, or quality levels.
  • Compiled reports outlining findings from each inspection performed.
  • Notified supervisors or other relevant personnel of test or production issues.
  • Adjusted and monitored production processes or equipment for quality and productivity.
  • Identified acceptable components and rejected defective products.
  • Reported and tracked deviations from quality standards and recommended corrective action to appropriate personnel.
  • Provided safety information to contractors, engineers, or test equipment operators.
  • Compared product and materials colors, shapes, textures and grades with predetermined templates.
  • Generated detailed reports outlining inspection and testing results.
  • Verified inventory count accuracy by cross-referencing physical counts against computerized records.
  • Reviewed technical documents to verify code and safety compliance in both electronic and paper formats.
  • Read blueprints and manuals to determine test procedures or adjustment methods.
  • Identified any potential hazards or areas that needed improvement through visual inspection and testing.
  • Reviewed supplier documentation and ensured it was compliant with relevant regulations.
  • Inspected finished goods prior to shipment to guarantee they meet company standards.
  • Coordinated with engineers and architects to resolve compliance issues discovered during inspections.
  • Monitored production processes to detect deviations from specifications or standards.
  • Identified production concerns and worked with supervisors to understand and remedy situations.
  • Inspected, tested and measured materials for conformance to specifications and regulatory requirements.
  • Repaired malfunctions, reassembled items, and performed final tests.
  • Monitored construction sites to verify adherence to environmental regulations and sustainability practices.
  • Documented all inspection results accurately in accordance with established guidelines.
  • Noted changes during testing in project documentation.
  • Managed and resolved conflicts arising from inspection findings, negotiating between parties to achieve compliance.
  • Ensured all products met industry-standard requirements before being released for sale.
  • Administered competency tests to determine engineers or operators are qualified to use equipment.
  • Cleaned and calibrated dial indicators, fixed gauges, or height gauges prior to tests.
  • Produced official reports of findings to meet regulatory standards and assist senior leadership with improving operations.
  • Approved incoming materials by confirming specifications and conducting measurement tests.
  • Maintained accurate records of all tests conducted during the inspection process.
  • Recommended improvements to production process to facilitate quality control.
  • Documented inspection findings, prepared comprehensive reports, and communicated results to stakeholders.
  • Updated and maintained inspection records and databases for historical reference and compliance tracking.
  • Recommended essential corrective actions based on test results.
  • Analyzed data collected during inspections to ensure accuracy and consistency.
  • Implemented and oversaw inspection schedules to ensure timely and efficient completion of tasks.
  • Worked closely with management teams to help identify process improvements that would improve overall efficiency levels.
  • Marked materials with grade or acceptance status.

Well Test Technician

Southern Petroleum Labs
05.2014 - 02.2017
  • Diagnosed and repaired faulty testing equipment to prevent false or misleading data within dataset.
  • Prepared test equipment and materials to properly simulate field conditions and idealized scenarios.
  • Repaired malfunctions, reassembled items, and performed final tests.
  • Marked materials with grade or acceptance status.
  • Compared product and materials colors, shapes, textures and grades with predetermined templates.
  • Cleaned and calibrated dial indicators, fixed gauges, or height gauges prior to tests.
  • Noted changes during testing in project documentation.
  • Created maintenance records to root out consistently faulty test equipment.
  • Created reports documenting all test results, including defect descriptions and corrective action taken.
  • Learned new testing methods through continued education and research.
  • Selected samples for use as test models.
  • Maintained accurate records of all tests performed including setup parameters used, results obtained, modifications made.
  • Documented test procedures and steps carefully to allow for testing duplication and review.
  • Performed regular maintenance checks on test equipment such as calibrating instruments according to manufacturer's instructions.
  • Inspected, tested and measured materials for conformance to specifications and regulatory requirements.
  • Prepared and set test articles, fixtures and components to accurately conduct testing procedure.
  • Provided safety information to contractors, engineers, or test equipment operators.
  • Notified supervisors or other relevant personnel of test or production issues.
  • Diagnosed defective components using schematics diagrams and other reference materials as required.

Project Superintendent

Crandall and Sons
02.1997 - 06.2002
  • Provided leadership, insight and mentoring to newly hired employees to supply knowledge of various company programs.
  • Developed work teams and delegated project tasks according to individual strengths.
  • Managed subcontractors, ensuring that all work was completed according to project specifications and standards.
  • Cleaned or prepared construction sites to eliminate hazards.
  • Responded quickly and effectively to emergency situations such as weather delays or unexpected obstacles encountered during construction process.
  • Hired and delegated tasks to subcontractors to complete projects faster.
  • Monitored project progress to enforce adherence to deadlines and quality standards.
  • Inspected worksites on a regular basis to ensure safety regulations were followed and quality control standards were met.
  • Completed investigations into complaints, incidents and accidents at work sites.
  • Kept work areas organized and clean according to industry standards.
  • Conducted site inspections to ensure compliance with safety regulations and building codes.
  • Interpreted complex technical documents such as contracts, purchase orders, change orders.
  • Utilized spreadsheets, calendars and reports to gauge work productivity and monitor progress.
  • Implemented onsite safety protocols and procedures and properly trained team members on prevention measures.
  • Created work crew schedules and delegated assignments.
  • Scheduled staff and subcontractors to maintain adequate coverage and complete jobs on time.
  • Read and interpreted drawings and assessed construction against plans.
  • Conducted walk-throughs with clients to identify rework needs and answer client questions.
  • Reviewed project blueprints and specifications to determine number of workers needed to complete jobs.
  • Collaborated with architects, engineers, owners and other stakeholders on design changes or modifications needed during construction process.
  • Conducted pre-job site visits to evaluate potential risks and hazards associated with each job assignment.
  • Obtained appropriate permits and paperwork from local authorities.
  • Ensured compliance with local building codes as well as company policies throughout the duration of the project.
  • Held weekly meetings with subcontractors to review job performance, discuss potential problems, and provide guidance for improvement.
  • Verified work compliance with applicable regulations, codes and specifications.
  • Reviewed blueprints and drawings prior to commencement of work to ensure accuracy in material ordering and installation process.
  • Prepared and planned worksites to help jobs run smoothly.
  • Maintained records of construction progress and reported any discrepancies or delays immediately to the Project Manager.
  • Kept detailed progress records to hit strict deadlines and adjust plans.
  • Conducted site pre-inspections and coordinated post-construction audits.
  • Assisted in resolving conflicts between subcontractors regarding cost overruns or missed deadlines.
  • Eliminated project lags by organizing work-in-progress and delegating tasks.
  • Coordinated phases of construction projects from inception to completion.
  • Informed stakeholders of daily activities and progress by providing in-depth field reports.
  • Maintained logs of on-site operations and reported findings to supervisors.
  • Coordinated with other departments to ensure timely completion of projects.
  • Supervised day-to-day operations of construction sites, including scheduling of workers, materials delivery, and equipment usage.
  • Monitored labor hours against estimated costs for each task in order to stay within budget limits.
  • Inspected sites before and after construction projects.
  • Completed day-to-day duties accurately and efficiently.
  • Provided excellent service and attention to customers when face-to-face or through phone conversations.

Education

Some College (No Degree) - Business Administration

University of Missouri
Columbia, MO

Skills

  • Weld Integrity Evaluation
  • Precision Fabrication
  • Maintenance Repairs
  • Coating Quality Inspection
  • Experienced in Polly Fusion Techniques
  • Hydrostatic Testing Proficiency
  • Utility System Inspection
  • CPWIV
  • Manage RT Crews
  • Film Analysis
  • Holiday Detection
  • Proficient in Operating Heavy Equipment
  • Material Inspection
  • Credential Verification
  • Oversee Pipe Yard Operations
  • Inventory Management
  • Evaluated Proposed Change Orders
  • Conducted Post-Construction Audits
  • Conducted Safety Inspections on Construction Sites
  • Manage Completion Notifications
  • Certified Compliance Professional
  • Comprehensive Daily Reports
  • Oversight of Multiple Teams
  • ROW
  • Fencing
  • Ditching
  • Lowering-in
  • Backfill
  • Padding
  • Clean up
  • Concrete
  • Bolt ups
  • Torque Measurement Expertise
  • Map Creation Using Blue Beam
  • LACT System Installation
  • Project Issue Resolution
  • Commissioning of Pipelines
  • Permit Preparation
  • Installation of Well Separators
  • Meter Run Installation
  • Assess Fuel Quantity
  • Chloride Measurement
  • Expertise in Measuring Condensate Levels

Certification

  • Certified Pipeline Welding Inspector (CPWI+V), Certification #63766737
  • Occupational Safety and Health Administration (OSHA) 30-Hour Certification, #14-602030061

Languages

English
Professional

References

References available upon request.

Timeline

General Oilfield Inspector

KNX
03.2020 - Current

Welding/Pipeline Utility Inspector

Texray
03.2020 - Current

Welding/Pipeline Utility Inspector

Delek Logistics
01.2018 - 03.2020

Pump Operator

Nichols Oil Tools
03.2017 - 12.2017

Well Test Technician

Southern Petroleum Labs
05.2014 - 02.2017

Owner

J&S Mechanical
07.2009 - 12.2017

Project Superintendent

Crandall and Sons
02.1997 - 06.2002
  • Certified Pipeline Welding Inspector (CPWI+V), Certification #63766737
  • Occupational Safety and Health Administration (OSHA) 30-Hour Certification, #14-602030061

Some College (No Degree) - Business Administration

University of Missouri
SHAWN NICKELL