Summary
Overview
Work History
Education
Skills
Certification
References
Timeline
Generic

Shawn Riebe

Manitowoc,Wisconsin

Summary

Experienced CNC Operator with nearly three decades of job knowledge in various types of machines. Though I am not highly experienced in Programming I have two years of background experience, mostly self trained. Highly-motivated employee with desire to take on new challenges. Strong work ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills.

Overview

29
29
years of professional experience
1
1
Certification

Work History

CNC Burn Table Programmer

Broadwinds Heavy Fabrications
Manitowoc, WI
02.2022 - 01.2024
  • Created nesting programs to cut on CNC Plasm/Oxyfuel Burn Tables
  • Nested subweldment parts according to Excel spreadsheets showing customer demand
  • Verified DXF conformity to customer requirements by use of Solidworks 2021, Draftsight 2023, BOM reports and use of Blueprints
  • Managed DXF part and Plate Inventory Libraries through Pronest 2021 and 2023
  • Created new parts through use of Solidworks 2021
  • Monitored plate inventory and coordinated with purchasing for needed materials and performed quarterly physical inventories to ensure inventory was correct
  • Coordinated with Engineering and Project Managers on new and special projects to create parts for subweldments
  • Worked with Machine Operators to ensure that programs ran correctly and that quality met Customer requirements

CNC Macine Burner IV

Broadwinds Heavy Fabrications
Manitowoc, WI
06.2019 - 02.2022
  • Load nesting programs and run test cycle to ensure that program is correct
  • Material handling ie; Identify material to make sure it is correct thickness and grade, load material on table by use of forklift or overhead crane with the aid of steel "shoes" or large 10,000 lb magnet
  • Monitor Oxygen, Propane and Nitrogen tanks for use in the cutting-scribing operations and set regulators appropriately for the type of cutting operation
  • Cut nesting programs and performing visual quality checks and checking dimensions on parts to ensure that they meet or exceed customer requirements by use of measuring tapes, calipers, square edges, tri-squares and mechanical bevel gauges
  • Clean, palletize parts and supply "travelers" with the product to ensure that it goes to the proper location for the next operation

  • Prioritized and organized tasks to efficiently accomplish service goals.
  • Maintained schedule of class assignments to meet deadlines.
  • Completed day-to-day duties accurately and efficiently.
  • Understood and followed oral and written directions.
  • Monitored machine operation to detect malfunctions or out-of-specification production.
  • Troubleshot issues with the burn table when they arose and took corrective action accordingly.
  • Reported non-conformance issues to supervisor for prompt action.
  • Recognized potential safety hazards associated with working around heavy machinery and took necessary steps to prevent accidents or injuries.
  • Adjusted machine settings as needed to ensure accurate cuts were made.
  • Corrected minor imperfections by removing excess materials and buffing out problems.
  • Performed regular maintenance on the burn table including lubrication, cleaning and replacing worn parts.
  • Provided guidance and training to new employees on proper use of the burn table equipment.
  • Adapted quickly to changing job requirements by using problem solving skills and troubleshooting techniques.

CNC Converting Machine Operator

International Paper
Manitowoc, WI
02.2017 - 06.2019
  • Communicate potential hazards to supervisors immediately upon detection.
  • Verify dimensions of finished products using measuring instruments such as calipers, micrometers and rulers.
  • Collaborated with team members to finish runs on tight deadlines.
  • Follow established company policies and procedures when operating machines.
  • Identify defective items produced by the machine and separate them from good ones.
  • Keep work area clean and organized at all times.
  • Fed raw materials into gluing, coating and slitting rollers via manual and automated methods to achieve desired production speeds.
  • Used hand stampers to stamp dates and other information on products.
  • Maintain accurate records of production output and downtime.
  • Adjust machine settings according to job specifications.
  • Troubleshoot mechanical issues with the machinery.
  • Set up, adjust and operate converting machines to cut, fold, glue and assemble paperboard boxes.
  • Installed attachments to machines in order to complete special operations and projects.
  • Load raw materials into feeder trays of machines.
  • Started machines and moved controls to regulate tension on pressure rolls.
  • Record data from each production run including material used, quantity produced, defects found.
  • Inspected finished items to check for defects.
  • Inspect product for quality assurance.
  • Monitor machine operations to detect malfunctions or out-of-tolerance production and make necessary adjustments.
  • Document daily activities in logbooks or computer systems as required.
  • Utilized automatic stamping devices to stamp products with information.
  • Removed and stacked completed items in preparation for shipment.
  • Cut products to specific measures, carefully using cutting tools.
  • Ensure compliance with all applicable health, safety regulations and standards.
  • Took machines apart to clear jams and replace broken components.
  • Communicate effectively with co-workers regarding any problems encountered during shifts.
  • Ensure that all safety protocols are followed while operating equipment.
  • Completed day-to-day duties accurately and efficiently.
  • Maintained schedule of class assignments to meet deadlines.

CNC Machine Burner III

Manitowoc Cranes
Manitowoc, WI
02.2008 - 10.2016
  • Followed established procedures for storage and handling of materials used in production processes.
  • Reported non-conformance issues to supervisor for prompt action.
  • Performed basic repairs and preventive maintenance on furnace equipment.
  • Adapted quickly to changing job requirements by using problem solving skills and troubleshooting techniques.
  • Ensured that all safety measures were followed while operating the burn table.
  • Provided guidance and training to new employees on proper use of the burn table equipment.
  • Assisted in the setup of burn table according to blueprints and design specifications.
  • Utilized various hand tools such as calipers, micrometers, gauges for measuring purposes during pre-production inspection activities.
  • Identified and managed optimal processing sequences, furnace temperatures and heat cycle requirements for each production run.
  • Loaded raw material onto the burn table for cutting operations.
  • Implemented quality control measures during each phase of production process to ensure accuracy of end product.
  • Identified defective parts or components immediately upon discovery and reported them to supervisor.
  • Monitored and adjusted equipment operation to maintain desired temperatures and times.
  • Recognized potential safety hazards associated with working around heavy machinery and took necessary steps to prevent accidents or injuries.
  • Unloaded finished parts from the burn table after completion of cutting process.
  • Adjusted machine settings as needed to ensure accurate cuts were made.
  • Stamped identification marks on completed parts using both manual and machine punch techniques.
  • Maintained records of production data such as quantity produced, cycle times.
  • Measured, tested and visually evaluated finished products to assess conformance with specifications and assign grades.
  • Troubleshot issues with the burn table when they arose and took corrective action accordingly.
  • Inspected parts for conformance with quality standards before packaging them for shipment.
  • Completed visual inspections and manual testing to assess product quality.
  • Received verbal instructions from supervisors regarding daily tasks and assignments related to the work area.
  • Attended regular meetings with supervisor and team leader to discuss progress reports and any problems encountered during shift.
  • Corrected minor imperfections by removing excess materials and buffing out problems.
  • Monitored machine operation to detect malfunctions or out-of-specification production.
  • Delivered products to customer locations on time.
  • Prioritized and organized tasks to efficiently accomplish service goals.
  • Completed day-to-day duties accurately and efficiently.
  • Identified needs of customers promptly and efficiently.
  • Maintained updated knowledge through continuing education and advanced training.

CNC Setup/Operator

Federal-Mogul
Manitowoc, WI
12.1994 - 11.2007
  • Setup and Operation of CNC Trapeze Keystone Machines
  • Inspect and install tooling used in the Keystone Finish Grind Process and grind tooling to proper angle specifications
  • Monitored machine operations to detect malfunctions or out-of-specification operation conditions.
  • Complied with environmental regulations when using, dispensing of, or handling hazardous and non-hazardous materials and waste.
  • Trained other technicians in correct use of tools, safety procedures and machine operations techniques.
  • Learned and followed safety and emergency procedures.
  • Loaded raw materials into production machinery.
  • Followed safety protocols while operating machinery in order to prevent accidents or injuries on the job site.
  • Taught new employees machine operation techniques and important business procedures.
  • Observed and troubleshot equipment and machines to detect malfunctions and notify appropriate personnel of needed repairs.
  • Reported failures, malfunctions or wear issues on equipment to supervisor.
  • Troubleshot and diagnosed equipment malfunctions to minimize downtime.
  • Rotated among various workstations, performing work necessary to meet production needs.
  • Assessed and corrected jams in equipment.
  • Retained safe and clean work area in accordance with Good Manufacturing Practices (GMPs).
  • Performed equipment inspections and preventive maintenance on production machinery.
  • Maintained production and quality documentation.
  • Assisted engineers in developing process improvements for increased efficiency in production processes.
  • Inspected finished products to verify conformity to quality standards.
  • Inspected finished products for conformance to customer requirements and quality standards.
  • Utilized hand tools such as wrenches, hammers, screwdrivers when performing repairs.
  • Completed day-to-day duties accurately and efficiently.
  • Understood and followed oral and written directions.
  • Used measuring tools such as Angle, Width, and Barrel Gauges with proficiency

Education

GED -

NWTC
Sturgeon Bay, WI
12-1993

Skills

  • Work Order Interpretation
  • Maintenance and Repair Abilities
  • Equipment Operation
  • Equipment Monitoring
  • Troubleshooting Skills
  • Conveyor Operation
  • Hand Tool Use
  • Documentation Skills
  • Inspection Abilities
  • Organizational Skills
  • Analytical Thinking
  • Recordkeeping
  • Safety Inspection
  • Production Monitoring
  • Machine Operation
  • Equipment Inspection
  • Measuring Skills
  • Attachment Installation
  • Quality Assurance
  • Interpersonal Communication
  • Flexible and Adaptable

Certification

  • Overhead Crane Certification
  • Forklift Certification

References

References available upon request.

Timeline

CNC Burn Table Programmer

Broadwinds Heavy Fabrications
02.2022 - 01.2024

CNC Macine Burner IV

Broadwinds Heavy Fabrications
06.2019 - 02.2022

CNC Converting Machine Operator

International Paper
02.2017 - 06.2019

CNC Machine Burner III

Manitowoc Cranes
02.2008 - 10.2016

CNC Setup/Operator

Federal-Mogul
12.1994 - 11.2007

GED -

NWTC

Similar Profiles

CREATE PROFILE
Shawn Riebe