Summary
Overview
Work History
Education
Skills
Certification
Timeline
Generic

Stephen Javier

Chula Vista,CA

Summary

Subject Matter Expert with 27 years of experience in Power Systems, Switchboards, Load Centers, Lighting and Distribution Systems, Navigation Lights, Galley Equipment, Motors, Generators, Motor Controllers, Transformers, Sensors, Alarms, AC Units, HES-C, LPAC, MPAC, HPAC, HPBAC, HVAC systems, TMCS, CPS VSD, PLC, Microprocessors, Steering HPU, Damage Control, Fuel Oil Service, Lube Oil Service, Oily Waste, VCHT System, Sea Water Service, Potable Water Service, Anchor Windlass, Boat Davit, Kingpost, Stern Gate, Small Boat, RAST System, SMARTPAC, BHS, Shore Power, and wide variety of test equipment. Excellent managerial skill in Electrical Safety, Tag-out, and 3M programs. Supervised and trained over 400 personnel. Experience in Work Authorization Form. Active Security Clearance until September 2029.

Overview

24
24
years of professional experience
1
1
Certification

Work History

Engineering Technician (Electrical)

Southwest Regional Maintenance Center
San Diego , CA
06.2022 - Current
  • Completed technical trainings for High Efficiency Super-Capacity chiller (HES-C) and Modular Refrigeration System (MRS) at NSWCPD.
  • Led and developed C252 Electrician JQR.
  • Led and trained SMEs in response and execution of ESRs and DFSs IAW SOP.
  • Lead members of a team providing knowledge sharing, coaching peers and building a cohesive work environment. Proven communicator across departmental/command lines with limited oversight and within area of expertise. Input leads to improvements and changes throughout the technical community
  • Utilizes opportunities to increase technical and leadership proficiency, facilitate career progression and development.
  • Utilizes opportunities to improve working relationships with other departments, commands and/or stakeholders.
  • Coaches peers and seeks mentorship opportunities to develop their professional career and personal growth.
  • Trained and developed peer’s skills to properly document FTA/Assessment completion, analyze complex requests for ESR/DFSs and respond with proper Technical Authority.
  • Self-assesses to identify areas that require more development or improvement.
  • Efficiently utilizes time and documents it appropriately in the required system.
  • A key proponent of safety. Identifying potential safety discrepancies and ensuring correct and quick action is taken. In addition, takes safety training seriously. Should a safety event occur, appropriate actions are initiated to ensure lessons learned are generated and implemented? The goal is zero safety violations.
  • Continually training, sharing knowledge and lesson learned with fellow SMEs, Ship's Force, RMCs, TWHs, and ISEAs to ensure tasks are always on time or ahead of schedules.
  • Led and coordinated with SF, ISEA, TWH, OEM, C282, C254, C262, C261, C265, C900, HRMC, NWRMC, and MARMC to accomplish the fleet mission to include the following systems: HES-C, TMCS, CPS VSD, TGVDs, Compressed Air Systems, AC Unit Microprocessor Control Panel, HPBAC, and VCC.
  • Led multiple technical corrections of HPBAC new Spectrum Associate Pressure Switch and associated technical manual wiring configurations and helped TWH to write the procedure.
  • Provided technical advices to NWRMC, HRMC, ISEA, and TWH to include TMCS, HPBAC, HES-C, 200 Ton AC Unit Microprocessor, and VCC.
  • Successfully coordinated and led C252, C265 and C262 SMEs in troubleshooting multiple Ventilation Control Centers (VCC) for USS Tripoli.
  • Successfully coordinated and led C282 and C252 SMEs in troubleshooting and repair of the Thermal Management Control System (TMCS) for USS Halsey which both codes were initially unfamiliar with the system.
  • Led and trained over 300 Sailors in troubleshooting and repair of 192 OBTAs and DS to include 26 C3/C4 with 100% accuracy.
  • Coordinated and led SF, ISEA, and NWRMC in the troubleshooting and repair of CPS VSD.
  • Completes with minimum supervisory guidance 95% of the time. Submits Technical Feedback Reports when applicable. Collaborates within and outside the organization to resolve routine and complex problems. Internal and external networks seek out employee for support. Conform to Technical Authority (TA) Policy and Standards. Active support for TA, including teaching/training team members, making recommendations to ships.
  • Executed 100% applicable mission in accordance with department/enterprise requirements.
  • Submitted technical feedback for HPBAC to TWH and ISEA. ISEA and TWH concurred with my technical feedback and executed the changed.
  • Actively finding ways to improve performance in applicable mission areas to include collaborations with different RMCs and within SWRMC code 200.
  • Effectively communicated (oral and written) with the customer, required stakeholders and departmental leadership in the execution of troubleshooting and repair of TMCS, HES-C, VCC, CPS VSD, and 192 OBTAs and DSs of HVACs, Compressed Air Systems, Refrigeration Plants, and Air Conditioning Plants.
  • Collaborated with ISEAs, RMCs, TWH, and SF in troubleshooting and repair of multiple Air Conditioning Plants, Refrigeration Plants, Compressed Air Systems, and HVAC systems.
  • Able to maintain required systems (i.e. FTS, NMD, eDFS, TA&R) to properly document mission execution.
  • Ensured all decisions and actions were in accordance with technical authority.
  • Led the troubleshooting and repair of 192 OBTAs including 26 C3/C4 with 100% accuracy.

Engineering Technician (Electrical)

NOBLIS/NSWCPD
San Diego , CA
01.2021 - 06.2022
  • Provided liaison support between NSWCPD Program Managers, ISEAs, NAVSEA sponsors, Type Commanders (TYCOMs), waterfront activities, and Original Equipment Manufacturers (OEMs) to the DDG/CG Modernization Program.
  • Provided certification, training and qualification of shipboard personnel that operate and maintain the systems.
  • Tested and evaluated of upgrades and improvements, as well as verification of compatibility with other installed systems.
  • DDG 51 Power Systems On Sight Representative during alteration, installation, and testing of DVR, UCC, DIU, RSC, and MFM.
  • Coordinated and led DDG 86 shipboard engineers on Dynamic Load Testing on Gas Turbine Generators IAW EOSS and NAVSEA Technical Manual.
  • Troubleshot and trained shipboard electricians on DDG 86 fault circulating current on NO.3 Generator.
  • Coordinated, supervised over-the-shoulder, and trained DDG 88 and DDG 91 shipboard electricians during Alteration, Installation, and Testing of modern HM&E equipment hot and cold checks IAW NAVSEA instructions and technical manuals on machinery control systems to include Power Systems, AC Units, Fuel Oil Service Systems, Lube Oil Service Systems, Oily Waste Systems, Halon Systems on GTG and GTM, Anti-Icing systems, Cross Tie Breakers, Longitudinal Breakers, and GTG bus ties.
  • Managed customer inquiries with a focus on providing timely resolutions while maintaining excellent customer service levels.

Electrical Engineering Technician V

AMENTUM/SWRMC
San Deigo , CA
07.2021 - 12.2021
  • Provided CO/TYCOM/ISIC with overall evaluation of ship's system technical material assessment, intended to improve awareness of C5I/HM&E readiness and ship's force self-sufficiency in areas of assessment,
  • Provided training and technical assistance to over 40 shipboard personnel to define existing and potential problems ensuring a
    high state of Combat Readiness.
  • Supervised and trained newly onboard Engineering Technicians on TSRA by utilizing ICMP Tasks, onboard equipment operational PMS cards, EOSS, and NAVSEA technical manual procedures.
  • Utilized additional applicable equipment/system level operational tests.
  • Reviewed technical documentation, PMS, special tools, test equipment, CSMP, and supply support.
    Provided over-the-shoulder training to ship's company while observing ship's company conducted applicable
    operational PMS cards.
  • Provided and trained troubleshooting techniques training to aid over 40 shipboard personnel in identifying and correcting equipment failures on Hydraulic Controls.
  • Documented all equipment deficiencies identified during the TSRA test period by utilizing Fleet Assessment Support Tool.
  • Provided equipment/system problem identification, determine problem root cause and most effective corrective
    actions.
  • Provided and trained troubleshooting and analysis to eight personnel for discovered electrical and mechanical faults on DDG 1000 Boat Bay Doors and BHS.
  • Provided and trained troubleshooting and analysis to four personnel for discovered electrical fault on LCS Wartstila Propulsion Water Jet Pump Starter.
  • Provided troubleshooting, analysis, and six personnel training for discovered electrical fault on LCS SMARTPAC PLC and main controller.
  • Evaluated engineering proposals and drawings to assess feasibility and conformance with sound electrical engineering practices and safety standards.
  • Interpreted electrical and mechanical schematics, blueprints and diagrams.
  • Examined on-site electrical systems and equipment to identify faults and devise design corrections.

Electrical Technician

Propulsion Control Engineering
San Diego , CA
05.2021 - 07.2021
  • Supervised job site operations to maintain consistent safety and hazard-free work area.
  • Performed with efficiency and quality while installing and repairing electrical projects.
  • Supervised and trained electricians during shipboard modifications, overhauls, installations, maintaining complete understanding of work scope, safety, and documentation requirements.
  • Followed electrical NAVSEA Standard Items and technical manuals to install and repair electrical systems.
  • Performed testing and troubleshooting of propulsion control systems.
  • Managed and mentored highly effective 14-member team of electricians.
  • Enforced safety regulations and penalized workers for not following work safety agreements.
  • Obtained proper permits to carry out electrical work on shipboard projects.
  • Meticulously tested installations to check continuity of circuits, and compatibility and safety of components using test equipment such as multimeter, megger, ammeter, infrared thermometer, and oscilloscope.
  • Demonstrated self-reliance by meeting and exceeding workflow needs.

Chief Electrician

USS McCain DDG 56
Yokosuka , Japan
10.2017 - 02.2020
  • Supervised and trained 18 personnel during my tenure as Leading Chief Petty Officer of both Electrical and Auxiliary divisions.
  • Repaired 200 Ton AC units using PLC Ladder Diagrams, hand and power tools, and testing and diagnostic equipment.
  • Connected and repaired SWSP motor controllers based on mechanical drawings and electrical prints.
  • Tested and repaired LPAC and HPAC electric motors and controllers.
  • Interpreted PLC electrical and microprocessor schematics, blueprints, and diagrams.
  • Tested energized and de-energized circuits on HPU Steering Units and assisted in RATU and IOU adjustment IAW test procedures, PMS, EOSS, and NAVSEA tech manuals.
  • Trained maintenance journeymen electricians and electrical apprentices.
  • Coordinated with AIT on all electrical wiring installation, test procedures, cold and hot checks during shipyard repair and modernization.
  • Drafted and completed daily, weekly and monthly checklist for shipboard equipment maintenance.
  • Verified equipment certifications and regulatory compliance.
  • Performed Preventive Maintenance Checks and Services (PMCS).
  • Collected, entered and analyzed data, and created reports during Dynamic Load Testing on GTG IAW EOSS and NAVSEA tech manual.
  • Estimated costs of repairs of SHORE POWER breakers to determine feasibility.
  • Collaborated with engineers on testing of equipment modernization and modified instruments.
  • Diagnosed ANCHOR WINDLASS malfunctions and completed repairs to restore equipment and maintain in full combat mission.
  • Traced and diagnosed BOAT DAVIT electrical malfunctions using hand tools and test equipment.
  • Flawlessly executed the WAF, Electrical Safety, and Tag-Out programs during CNO Availability.

Recruit Canvasser

NRD Los Angeles
Yokosuka , Japan
08.2014 - 10.2017
  • Trained and mentored 12 recruiters in successful strategies for areas such as interviewing, qualifying candidates, mentorship of new candidates during delayed entry program.
  • Reviewed referral candidates and contacted qualified individuals to request applications.
  • Planned and executed recruitment events to bring in area candidates.
  • Sourced, qualified and conducted screening interviews with job candidates.
  • Provided recruiting activity reports to management utilizing industry-specific software and guidelines.
  • Collaborated with recruitment and HR professional to achieve hiring goals.
  • Brought in well-qualified, multifaced job candidates to fill open positions.
  • Contacted all job applicants to inform of application status.
  • Strengthened operational efficiencies and traceability by developing organizational systems for maintaining confidential employee records and reports.
  • Kept company in compliance with EEO requirements.
  • Created and maintained strong alliances with local colleges and trade schools to establish trusted relationship and continuous funnel of applicants.
  • Optimized recruitment efficiency and retained top talent by implementing new recruiting program.
  • Conducted interviews to ensure solid cultural alignment between client and candidate.
  • Communicated duties, compensation, benefits and working conditions to all potential candidates, enabling better understanding of job expectations.

Leading Chief Petty Officer

USS Lassen DDG 82
Yokosuka , Japan
08.2010 - 08.2014
  • Supervised 14 electricians during shipyard AIT, maintaining complete understanding of work scope, safety and documentation requirements.
  • Performed with efficiency and quality while installing and repairing electrical projects.
  • Supervised job site operations during CNO availability to maintain consistent safety and hazard-free work area.
  • Provided empowering leadership to ensure positive production outcomes and consistent team morale.
  • Promoted safety and work site awareness by identifying and removing potential hazards and effectively training team members in safety protocols.
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Developed improved training protocols in alignment with company goals.
  • Managed and mentored highly effective nine-member team of electricians.
  • Took ownership of electrical crew schedule, developing short- and long-term look-ahead schedules to align with execution plans.
  • Reviewed and monitored cost and man-hour budget for installation process to develop staff facilities, equipment and tool requirement plan.
  • Meticulously tested installations to check continuity of circuits, and compatibility and safety of components using test equipment such as ohmmeter, amp meter, voltmeter, and oscilloscope.
  • Obtained proper permits to carry out electrical work on facility and construction projects.
  • Functioned as crew leader, overseeing work of lower-level licensed electricians and trade helpers.
  • Followed electrical code manuals to install and repair electrical systems.
  • Enforced safety regulations and penalized workers for not following work safety agreements.
  • Provided technical supervision and support to Instrumentation and Electrical (I&E) supervisors, Instrument and electrical planners, and contract personnel.
  • Created and compiled all safety training procedures into manuals to disseminate to all staff members.
  • Authored, coordinated and delivered mass educational briefings focused on occupational mishap trends and prevention.
  • Conducted regular inspections of facilities to check compliance with fire, hazard and safety guidelines.
  • Supervised safety audits and oversaw investigations into plant quality issues.
  • Held safety training and traffic safety instructional courses which led to marked improvements in safety culture across personnel groups.
  • Created and implemented programs, policies and procedures designed to effectively reduce or eliminate injuries and hazards in workplace.

Electrician Leading Petty Officer

NAVSTA Norfolk
Norfolk , VA
01.2007 - 08.2010
  • Installed and maintained breaker panels for commercial and residential buildings.
  • Inspected security and fire alarm systems for commercial venues.
  • Led team of apprentice electricians through installing electrical systems and inspected existing circuits.
  • Read blueprints and improved layouts for residential electrical systems.
  • Maintained circuits and wiring with hands-on work and computer systems.
  • Diagnosed equipment malfunctions and completed repairs to restore equipment and maintain uptime.
  • Implemented vast knowledge of electronics principles to resolve complex electrical problems.
  • Repaired electrical equipment using hand and power tools and testing and diagnostic equipment.
  • Connected and repaired equipment based on mechanical drawings and electrical prints.
  • Maintained accurate electronic and instrument inventory to support safe and efficient operation.
  • Trained maintenance journeymen electricians and electrical apprentices.
  • Tested and repaired electric motors, variable frequency drives, alarms and control systems.
  • Tested energized and de-energized circuits, following test procedures and assisted in specialized test procedures.
  • Verified equipment certifications and regulatory compliance.
  • Drafted and completed daily, weekly and monthly checklist for building equipment maintenance.
  • Maintained inventory of parts for immediate and emergency repairs.
  • Estimated costs of repairs to determine feasibility.
  • Installed all electrical wiring during remodeling projects.
  • Kept permits, isolation tags and logs current at all times.
  • Collaborated with engineering staff on testing of prototypes and modified instruments.
  • Established outstanding relationships with electricians and consumers.
  • Interpreted electrical and mechanical schematics, blueprints and diagrams.
  • Performed monthly, semi-annual and annual Preventive Maintenance Checks and Services (PMCS).

Electrician's Mate

ACU 1 Det Westpac
Sasebo , Japan
01.2004 - 01.2007
  • Kept work areas clean, neat and free of hazards.
  • Inspected existing wiring to identify problems such as short circuits.
  • Demonstrated strong foundation of safety knowledge and implemented industry best practices.
  • Adhered to company standards and OSHA regulations for work site safety.
  • Gathered required tools and equipment for each task to increase efficiency.
  • Reviewed blueprints and electrical schematics to perform tasks to specifications.
  • Measured and prepared supplies for electrical tasks.
  • Maintained high levels of accuracy and customer satisfaction by thoroughly checking completed work.
  • Verified measurements and made accurate cuts to avoid wasting materials on job sites.
  • Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
  • Completed preventive maintenance, inspections and electrical safety testing to optimize service environment.
  • Performed troubleshooting and maintenance on electrical equipment.
  • Tested electrical systems and circuit continuity using ohmmeters, voltmeters or oscilloscopes.
  • Addressed and resolved worksite safety hazards to reduce risk.
  • Examined and created solutions for high voltage electrical system problems.
  • Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
  • Assessed project scope and developed quotes to provide project requirements for management.
  • Oversaw project details and adherence to regulations, including diagnosis, wiring and OSHA compliance.
  • Led teams and delegated tasks to install, maintain or repair electrical systems and wiring.
  • Placed and installed safety systems, including emergency lighting, uninterruptible power systems and battery systems.
  • Evaluated electrical systems, equipment and components to identify and resolve defects and safety risks.
  • Used test equipment and hand tools to locate root causes of electrical issues and establish repair plans.
  • Traced and diagnosed electrical malfunctions using hand tools and test equipment.

Electrician’s Mate

USS Coronado
San Diego , CA
01.2000 - 12.2004
  • Performed troubleshooting and maintenance on electrical equipment.
  • Installed and repaired cables and wiring.
  • Analyzed and documented test results.
  • Completed preventive maintenance, inspections and electrical safety testing to optimize service environment.
  • Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
  • Reviewed blueprints to determine electrical component and wiring locations.
  • Used test equipment and hand tools to locate root causes of electrical issues and establish repair plans.
  • Performed troubleshooting and diagnosis on malfunctioning systems or components.
  • Worked extensively on three-phase, 277/480 volt power distribution systems.
  • Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
  • Utilized wide breadth of testing equipment to assess electrical systems, circuit continuity and accessory fixtures.
  • Connected wires to circuit breakers and transformers.
  • Investigated and corrected problems with electrical and mechanical components.
  • Maintained accurate accountability for all auxiliary equipment, including air compressors, cooling water pumps, pre-lube pimps, fuel oil pumps and centrifuges as part of strict security protocols.
  • Performed testing, repair and upgrades on instruments, gauges and recording devices to maintain safety.
  • Performed routine tests, incidental maintenance, electrical switching and other activities necessary to uphold continuity of power generation.

Education

Associate of Applied Science - Computer Electronics Engineering Technology

ITT Technical Institute-Norfolk
Norfolk, VA
05.2009

Skills

  • NAVSEA regulations and compliance
  • Technical Authority
  • NAVSEA Standard Items
  • Fleet Technical Support (FTS)
  • TA
  • CMO
  • TSRA
  • ESR
  • DFS
  • TAVR
  • ICMP
  • MBPS
  • MFOM
  • SOP
  • NSTM and SIB
  • Supervision
  • Lean Six Sigma Green Belt
  • Job planning
  • Project management
  • Workforce Management
  • Schematics and blueprints
  • Electrical diagnostics
  • Electrical system knowledge
  • Electrical maintenance and operation
  • OSHA 10 Certified
  • Safety protocols
  • Safety oversight
  • Safety hazards analysis
  • Safety awareness and reporting
  • Conflict resolution
  • Decision-making
  • Team building
  • Relationship building
  • Quality assurance controls
  • Workforce training
  • Time management
  • Planning
  • Training & Development
  • Production and scheduling
  • Microsoft Office proficient
  • Maintenance & Repair
  • Reliable and trustworthy

Certification

  • Electrician Ship and Boat USMAP
  • Recovery Assist, Secure and Traverse Electrical
  • Electrician's Mate
  • Military History Detachment
  • Recruit Canvasser Enlisted and NROTC
  • Lean Six Sigma Green Belt Certified

Timeline

Engineering Technician (Electrical)

Southwest Regional Maintenance Center
06.2022 - Current

Electrical Engineering Technician V

AMENTUM/SWRMC
07.2021 - 12.2021

Electrical Technician

Propulsion Control Engineering
05.2021 - 07.2021

Engineering Technician (Electrical)

NOBLIS/NSWCPD
01.2021 - 06.2022

Chief Electrician

USS McCain DDG 56
10.2017 - 02.2020

Recruit Canvasser

NRD Los Angeles
08.2014 - 10.2017

Leading Chief Petty Officer

USS Lassen DDG 82
08.2010 - 08.2014

Electrician Leading Petty Officer

NAVSTA Norfolk
01.2007 - 08.2010

Electrician's Mate

ACU 1 Det Westpac
01.2004 - 01.2007

Electrician’s Mate

USS Coronado
01.2000 - 12.2004

Associate of Applied Science - Computer Electronics Engineering Technology

ITT Technical Institute-Norfolk
  • Electrician Ship and Boat USMAP
  • Recovery Assist, Secure and Traverse Electrical
  • Electrician's Mate
  • Military History Detachment
  • Recruit Canvasser Enlisted and NROTC
  • Lean Six Sigma Green Belt Certified

Similar Profiles

  • Brennan Williams

    Brennan WilliamsBrennan Williams

    Calibration Technician at Southwest Regional Maintenance CenterCalibration Technician at Southwest Regional Maintenance Center

    View Profile
  • Kyle Dion

    Kyle DionKyle Dion

    Navy Diver at Southwest Regional Maintenance Center - USNNavy Diver at Southwest Regional Maintenance Center - USN

    View Profile
  • Ami Son

    Ami SonAmi Son

    2nd Class, 1st Class, Tool Issue Room Custodian at Southwest Regional Maintenance Center, U.S. Navy2nd Class, 1st Class, Tool Issue Room Custodian at Southwest Regional Maintenance Center, U.S. Navy

    View Profile
Stephen Javier