Steve Shepard
Kirklin,IN
Summary
Experienced and dependable general worker with a proven track record of efficiently completing tasks in various settings. Skilled in manual labor, equipment operation, and maintaining a clean and organized workspace. Safety-conscious with a strong work ethic and the ability to adapt to different environments. Ready to contribute to a dynamic team and make a positive impact.
Overview
34
34
years of professional experience
Work History
Heat Treat Operator
Biddle Precision Components / EMC Precision
Sheridan , IN
1996.05 - 2024.07
- Performed pre-heat treatments on materials in accordance with established procedures.
- Monitored furnace temperatures and adjusted accordingly to ensure accuracy of heat treat processes.
- Cleaned, maintained and operated furnaces for heat treating operations.
- Calculated the proper annealing temperature for metal components according to customer specifications.
- Inspected parts before and after heat treatment process to ensure quality standards were met.
- Maintained detailed records of all heat treating processes including temperatures, times.
- Followed safety regulations while operating furnaces and performing other related tasks.
- Assisted in troubleshooting problems during the heat treating process.
- Loaded and unloaded materials into furnaces manually or using overhead crane equipment as needed.
- Adjusted gas pressure, time cycles, quenching tanks and cooling baths as required by product specifications.
- Operated various types of furnaces such as box, belt or batch type units depending on job requirements.
- Verified that correct material was loaded into the furnace prior to start up of the cycle.
- Checked hardness levels of metals after being subjected to a variety of heat treat processes.
- Communicated with supervisors regarding any issues that may arise during production runs.
- Tested samples from each run for strength, ductility, grain structure and other properties according to customer requirements.
- Identified potential defects in products during inspection phase and reported them immediately.
- Participated in daily maintenance activities such as cleaning furnace chambers and replacing worn out components.
- Examined raw materials and production components to verify quality and characteristics required for successful heat treating.
- Completed visual inspections and manual testing to assess product quality.
- Monitored and adjusted equipment operation to maintain desired temperatures and times.
- Reported non-conformance issues to supervisor for prompt action.
- Measured, tested and visually evaluated finished products to assess conformance with specifications and assign grades.
- Input accurate program numbers for computer-controlled systems.
- Coated raw materials with special materials to promote optimal heat spread and create uniform finishes.
- Performed visual, magnetic particle, liquid penetrant, and radiographic testing on a variety of materials.
- Monitored equipment for proper operation and calibration.
- Evaluated test results to determine if the material met specified requirements.
- Maintained records of all tests performed according to company policies and procedures.
- Participated in meetings with engineers and production personnel to discuss inspection results.
- Inspected parts prior to shipment in order to guarantee customer satisfaction.
Material Handler
Biddle Precision Components / Emc Precision
Sheridan , IN
1996.05 - 2024.07
- Received and distributed incoming materials to designated areas.
- Inspected materials for any damages or defects upon receipt.
- Maintained accurate inventory records of all received items.
- Organized warehouse shelves, racks, and bins for proper storage of materials.
- Loaded and unloaded trucks with appropriate material handling equipment.
- Verified accuracy of shipments against purchase orders and invoices.
- Performed regular cycle counts to ensure accuracy of inventory records.
- Prepared outgoing shipments by packaging, labeling, and loading onto delivery vehicles.
- Operated forklift in a safe manner to move large shipments within the facility.
- Collaborated with supervisors to develop efficient methods for storing goods.
- Assisted with physical inventories as needed by counting parts accurately and quickly.
- Ensured compliance with safety regulations while operating material handling equipment.
- Transported hazardous materials safely according to established protocols.
- Investigated discrepancies between inventory records and actual stock on hand.
- Reported any malfunctions or damages of material handling equipment promptly.
- Updated job knowledge by participating in educational opportunities such as seminars or trainings.
- Supported other warehouse personnel in completing tasks efficiently.
- Managed work area cleanliness by following company guidelines for organization.
- Adhered strictly to company policies concerning the use of protective gear while on duty.
- Organized warehouse inventory according to warehouse plan.
- Utilized forklift to move inventory items.
- Packed merchandise into boxes and containers in preparation for safe shipment.
- Loaded completed orders on pallets according to delivery numbers.
- Operated lift equipment to safely move stock in and out of high bay areas and around premises.
- Protected company inventory by maintaining and organizing storage areas.
- Checked incoming deliveries for quality and quantity to promptly identify damage or issues pertaining to orders.
- Managed warehouse receiving, storing and shipping.
- Logged unit quantities and entered data into inventory database.
- Palletized boxes to increase movement and shipment efficiency.
- Disposed of debris and hazardous materials properly to avoid contamination.
- Unloaded cargo from trucks with mechanized equipment.
- Sorted cargo for accurate shipment to target locations, preventing unnecessary delays, and promoting productivity.
- Worked with internal departments to locate missing packages and remedy incorrect deliveries.
- Kept up to date on safety procedures and correct lifting techniques to prevent injuries.
- Loaded and unloaded shipments from trucks and picked up and moved heavy packages and items using forklifts.
- Packed boxes and stock using organizational guidelines.
- Placed bins, carts and containers in convenient locations to assist with loading efficiency.
- Reviewed work orders before starting work to determine necessary materials and meet deadlines.
- Operated large vehicles, forklifts and pallet jacks to transport multiple freight loads.
- Protected items by wrapping in cling film, padded moving blankets and tape.
- Counted number of boxes or units in loading docks to confirm proper completion of work orders.
- Cleaned empty storage areas to achieve proper sanitation regulations and make area fit for future use.
- Used digital database to keep records of units and stock moved.
- Tagged and wrote identifying information on containers, boxes and cargo.
- Followed organizational procedures to stack and store cargo in transit sheds, ship holds and warehouses.
- Collaborated with other movers when loading large equipment to prevent potential accidents.
- Placed bracing, straps and other protective devices onto items in transit to prevent damage.
- Coordinated cargo unloading with other workers to achieve efficient and safe transportation.
- Loaded cargo onto transportation devices and attached affixing tools to achieve safe transportation.
- Carried necessary tools and supplies to transportation vehicles and returned to proper storage areas after use.
- Operated cranes to lift, move and place materials in designated areas.
- Maintained crane operations logs and records of maintenance activities.
- Performed daily inspections of all crane components prior to use.
- Loaded and unloaded material from trucks and other vehicles using the crane.
- Worked closely with riggers to ensure proper load handling techniques were used during lifts.
- Monitored loads for stability during lifting operations.
- Ensured adherence to safety regulations at all times while operating the crane.
- Communicated effectively with co-workers and supervisors regarding any issues or concerns related to the job site or equipment operation.
- Kept abreast of changing technologies through continuing education courses or seminars related to safe crane operation practices.
- Calculated weight limits based upon boom length, angle of lift, radius of swing and type of load being lifted.
- Verified that all safety devices are functioning properly before each shift.
- Reported any mechanical problems or malfunctions immediately so they can be addressed promptly.
- Assisted other workers in securing loads onto pallets for transport by forklift truck or overhead crane.
- Confirmed that all personnel are clear from the area before moving a load with the crane.
- Observed and followed signals of those from individuals directing moving and positioning of loads.
- Maintained accurate crane operator log books detailing seat time, jobs, locations, cranes used and daily hours.
- Maintained cranes by inspecting for defects or wear, lubricated ropes and winches and replaced worn out cables.
- Inspected equipment and materials for defects prior to operating cranes to prevent malfunction or damage.
- Trained and monitored junior crane operators, communicating tasks clearly and giving regular, constructive feedback.
- Inspected and maintained inventory of all slings, chains, ropes and shackles.
- Determined crane's load chart and rigging weight to calculate net capacity of every possible configuration.
- Calculated load weights and verified lifting capacities to prevent overload.
- Loaded or unloaded deliveries and shipments, taking care to avoid damage and safety risks.
- Mentored new employees on safety protocols and equipment procedures.
- Monitored cables and grappling devices for wear and replaced cables according to preventive maintenance schedule.
- Used floor scales to weigh pallets and bundles, documenting weights for company records.
- Used floor scales for weighing bundles.
MRO Buyer
Emc Precision
Sheridan , IN
2012.04 - 2022.09
- Reviewed purchase requisitions and verified that items requested were in line with company policy.
- Negotiated cost savings on materials, services, and equipment purchases.
- Evaluated vendor quotes and selected suppliers based on price, quality, selection, service, support, availability of parts and reliability.
- Coordinated shipments from vendors to ensure timely deliveries of goods.
- Managed the return process of defective or non-conforming material to suppliers.
- Resolved vendor or contractor grievances and claims against suppliers.
- Developed relationships with key vendors and suppliers for better pricing terms and conditions as well as improved product availability and delivery times.
- Received verbal and written instructions from the Purchasing Manager concerning assignment objectives.
- Identified new sources of supply by researching industry trends and developments through trade journals and other resources.
- Participated in periodic meetings with internal stakeholders to discuss purchasing strategies and initiatives.
- Executed purchase orders according to established procurement processes and guidelines.
- Assisted in resolving discrepancies between invoices and purchase orders.
- Processed payments for approved invoices in a timely manner.
- Inspected incoming items for conformance with specifications prior to acceptance into inventory.
- Maintained supplier relationships to improve lead time, cost and quality.
- Worked with suppliers to expedite open purchase orders and shipments in-transit.
- Requested pricing quotes from suppliers to determine best source of supply.
- Negotiated with selected suppliers to obtain lowest unit cost.
- Researched competitors and sourced new vendors.
- Liaised with accounting and vendors to minimize and clear up invoice discrepancies.
- Prepared and presented reports on purchasing activities, savings achieved, and challenges faced to management.
- Developed and maintained strong relationships with key suppliers to ensure reliable supply chains.
- Participated in continuous improvement initiatives to streamline purchasing processes and reduce costs.
- Attended trade shows and industry events to stay informed about new products and market trends.
- Tracked product and supply inventories and reported findings to supervisors.
- Examined, selected and purchased merchandise consistent with specification requirements.
- Collaborated with company managers regarding product pricing, promotions and markdowns.
Materials Manager
Biddle Precision Components/ EMC Precision
Sheridan , IN
2003.06 - 2022.09
- Reviewed and revised inventory levels to ensure adequate stock of materials.
- Analyzed supplier performance, identified cost savings opportunities, negotiated contracts, and managed vendor relationships.
- Monitored production processes to ensure compliance with safety regulations and quality standards.
- Maintained accurate records of all materials received, issued, returned, or discarded.
- Inspected incoming shipments for accuracy and condition prior to acceptance into inventory system.
- Implemented new methods for organizing inventory data in order to increase efficiency of operations.
- Resolved discrepancies between physical inventories and computer records on a timely basis.
- Collaborated with other departments such as Production, Purchasing, Quality Control., to ensure that raw materials were available when needed.
- Communicated regularly with suppliers regarding delivery dates and product availability.
- Conducted regular cycle counts of stored items in order to verify accuracy of stock records.
- Evaluated existing procedures related to material management processes and recommended improvements where necessary.
- Monitored planning to proactively adjust stock purchasing and management strategies.
Entry Level In Feed Grinder
Biddle Precision Components / EMC Precision
Sheridan , IN
2010.06 - 2016.05
- Adjusted grinding wheels to obtain specified dimensions and surface finish of workpiece.
- Measured workpieces with micrometers, calipers, and precision measuring instruments to ensure accuracy.
- Calculated size adjustments and machine settings to achieve specified results.
- Verified conformance of finished work piece to specifications using measuring instruments such as gauges, micrometers, and dial indicators.
- Observed operation of equipment to detect malfunctions or out-of-tolerance grinding.
- Inspected parts for surface defects, wear, proper clearance and conformance to specifications.
- Operated manual or automatic loading devices to feed parts into production machinery.
- Notified supervisors when major repairs were needed on grinding machines.
- Dressed wheels according to shape and size of the part being ground.
- Recorded data from each operation performed on the job card.
- Ensured that all safety procedures were followed while operating the grinder.
- Cleaned all machines after use before leaving the area.
- Maintained a safe working environment by adhering strictly to safety regulations.
- Contributed to team-based environment to maintain line productivity and meet expected deadlines.
- Operated equipment in environment with attention towards safety to avoid workplace accidents.
- Maintained work area safety and appearance, focusing on safety, organization and cleanliness.
- Reviewed pieces to assess compliance and note defects.
- Understood and complied with plant environmental, health and safety, environmental and OSHA regulatory requirements.
- Equipped machines with levers.
Entry Level Machinist
Biddle Precision Components
Sheridan , IN
1994.12 - 1996.05
- Performed routine maintenance on machinery, including lubrication, cleaning.
- Calculated dimensions and tolerances using knowledge of mathematics and instruments such as micrometers or vernier calipers.
- Adjusted machine feed and speed, changed cutting tools, or adjusted machine controls when automatic programming was faulty or if machines malfunctioned.
- Drilled holes in parts using drill presses.
- Assembled machined parts into mechanical units using hand tools and power tools.
- Observed machine operations to detect malfunctions or out-of-tolerance machining and adjust machines accordingly.
- Changed worn cutting tools as needed during operation.
- Used grinding equipment for finishing surfaces and sharpening cutting edges on machined parts.
- Monitored production output levels and made adjustments as necessary to maintain production goals.
- Operated hand tools, drill presses, riveting machines and tap burners to safely produce projects.
- Gauged and maintained tolerances on grinding diameters, depths, squareness and parallelism.
- Sustained lockout and tag-out safety protocols by properly using equipment and materials.
- Inspected material after completion for accurate measurements of dimensions.
- Separated scrap waste and related materials for reuse or recycling.
Laborer Operator
Arcadia Meats
Arcadia , IN
1990.03 - 1994.12
- Cleaned and sanitized knives, scales, tables, counters and other equipment used during processing.
- Loaded packed meat into containers for delivery or pickup by customers.
- Used tools, sprayers and cleaning solutions to disinfect work areas.
- Received and stored incoming meat products in refrigerated rooms.
- Weighed, portioned, and packaged meat for individual sale or bulk orders.
- Ensured accurate labeling of packages with weight, price, and expiration date.
- Maintained cleanliness of work areas including floors, walls, equipment and tools.
- Assembled boxes and crates to store finished product in the warehouse.
- Operated packaging machines to wrap products for shipment or storage.
- Utilized hand tools such as knives, saws, bandsaws, for cutting meat into smaller portions.
- Followed all safety protocols while operating machinery such as grinders and slicers.
- Prepared ground meat using grinder.
Education
High School Diploma -
Hamilton Heights High School
Arcadia, IN1993-05
Skills
- Forklift Operation
- Material Handling
- Warehouse Organization
- Precision measurement
- Adaptability
- Equipment Operation
- Workplace Safety
- Self motivated
- Team Player
References
References available upon request.
Timeline
MRO Buyer
Emc Precision
2012.04 - 2022.09
Entry Level In Feed Grinder
Biddle Precision Components / EMC Precision
2010.06 - 2016.05
Materials Manager
Biddle Precision Components/ EMC Precision
2003.06 - 2022.09
Heat Treat Operator
Biddle Precision Components / EMC Precision
1996.05 - 2024.07
Material Handler
Biddle Precision Components / Emc Precision
1996.05 - 2024.07
Entry Level Machinist
Biddle Precision Components
1994.12 - 1996.05
Laborer Operator
Arcadia Meats
1990.03 - 1994.12
High School Diploma -
Hamilton Heights High School
Similar Profiles
James AbneyJames Abney
CNC Machinist at Emc PrecisionCNC Machinist at Emc Precision
Benjamin GiffordBenjamin Gifford
Final Quality Inspector at Align Precision and ComponentsFinal Quality Inspector at Align Precision and Components
Hailey GarscaddenHailey Garscadden
General Laborer at Molded Precision ComponentsGeneral Laborer at Molded Precision Components