Stewart Jackson

• Performed equipment installation and maintenance for heavy machinery.
• Conducted regular inspections to ensure mechanical systems operated efficiently.
• Collaborated with team members to troubleshoot and resolve mechanical issues.

• Tasks overseen include but are not limited to basic form layouts, Leveling

skids. Indicator and laser alignments-rim and face, double reverse, Opti laser, easy laser.

• Experience in using precision tools including but not limited to 98s, dial calipers, dial indicators,

inside/outside micrometers, parallels, A-LINE alignment jigs.

Operated and maintained machinery for installation and repair tasks. Assembled mechanical components according to specifications and blueprints.

• Performed routine preventive maintenance on heavy equipment, reducing machinery downtime and enhancing operational reliability.
• Completed corrective and predictive maintenance on industrial machinery to replace worn parts and prevent breakages.
• Troubleshot equipment failures, identifying and resolving issues to restore functionality swiftly.
• Conducted regular inspections to ensure equipment safety and functionality.
• Inspected and tested all machinery components to ensure proper functionality.
• Aligned motors, pumps, gearboxes, and other mechanical systems.
• Installed new equipment according to manufacturer specifications.
• Ran tests on newly installed machines to verify their optimal functioning.
• Read diagrams and schematic drawings to determine work procedures.
• Reviewed equipment and daily job specifications, drawings, and blueprints to properly and safely assemble machinery.
• Repaired or replaced defective parts using hand and power tools, ensuring optimal equipment performance.
• Used rigging, hoists and equipment to move heavy machinery between locations and complete installations.
• Transported heavy machinery using hoists and dollies to designated areas. and equipment using hoists, dollies, rollers, and trucks.
• Dismantled machines, categorized parts by carefully documenting components and moved equipment into storage.
• Prepared shafts and hubs for coupling installation using hydraulic pumps.
• Pulled failed compressor bundles and installed replacement bundles.
• Installed, replaced, and inspected dry gas seals on compressors and rotating equipment.
• Set, level, position, and install industrial equipment according to plans and specifications.
• Perform oil flushes on rotating equipment and process systems.
• Perform mechanical installation, inspection, maintenance, and troubleshooting in industrial plant environments.
• Interpret P&IDs and assist operations with LOTO procedures.
• Coordinate PMs and CMs to be performed with other departments to ensure productivity is on schedule.The goal is oriented to avoid delays in plant production while also maintaining a safe work environment.Basic start up tasks includes motor runs- bearing temp readings and vibration readings.
• Experience with all related documentation required ie spot check forms. B.I.T.R.s.
• Preventive maintenance, rotating shafts, replacing belts, Greasing, or adding oil to bearings. Flushing oil,replacing filters.
• Pipe stress – tracking travel and torque to flange

• Handled drill pipe, tongs, and slips on rig floor.
• Inspected hoses, fittings, and tools for wear before daily drilling work.
• Greased, cleaned, and serviced rotating equipment and rig components.
• Supported pipe loading, unloading, and staging from catwalk areas.
• Followed safety procedures during heavy lifting and hazardous drilling tasks.
• Communicated with crew members to coordinate floorhand tasks and drilling operations.
• Maintained a safe work environment by adhering to safety rules and regulations.
• Operated power tongs to make-up or break-out drill pipe, casing and tubing.
• Assisted in the rigging up and down of drilling rigs for oil wells.
• Followed instructions given by driller regarding depth increments when tripping pipe into hole or pulling out of hole.
• Used hoists to lift heavy objects onto the rig floor when necessary such as tubulars or pump parts being installed onto pumps and motors .
• Performed general housekeeping duties around the rig site including sweeping floors and picking up debris.
• Cleaned mud pits, tanks, separators, degassers and other equipment as needed.
• Installed safety lines between the rig floor and derrickman while running drill pipe, casing, tubing into the hole during tripping operations.
• Inspected blowout preventer systems on a regular basis for wear and tear and reported any issues found to supervisor immediately.
• Transported tools, supplies and materials from one location to another using company vehicles or pickup trucks.
• Conducted routine inspections of mud pumps and motors for proper operation prior to use.
• Worked closely with service companies coming onsite providing support services like cementing jobs, ensuring their job was done properly without incident.
• Checked all components of BOP stacks before each connection was made up ensuring they were in proper working order with no visible damage present.
• Monitored well control systems during drilling operations for pressure indications or other irregularities that could cause problems with the well bore or production system.
• Obtained proper permits and completed job safety analysis (JSA) prior to beginning each new job.
• Mixed, weighed or measured and monitored shaker and mud tank operations.
• Managed the handling, sorting, and stacking of drilling pipes and drill strings.
• Cleaned and prepared sites for drilling operations and post-operation clean-up.
• Monitored drilling operations and reported any issues to the Driller.
• Assisted in troubleshooting and repairing minor mechanical problems on the rig.
• Assisted in the installation of blowout preventers and other well control equipment.
• Operated and maintained drilling rig diesel motors, transmissions, pumps, and drilling mud systems.
• Performed regular inspections and maintenance on drilling equipment and tools.
• Participated in rig mobilization and demobilization processes, ensuring safe and efficient operations.
• Manipulated sections of pipe and drill during drilling.
• Conducted visual inspections to identify potential hazards and equipment wear.