Engineering Technician with twenty years of experience in the manufacturing environment. Personable individual, capable of thriving in a multiplex of high-pressured environments while assisting engineers with designs, analysis, shop processes and procedures. Strong aptitude in troubleshooting, testing, and repairing electronic equipment. Strong background writing, executing and reporting test data. Dedicated to offering product insight throughout development and deployment.
Hi, I’m
Tiffany Hamilton
Heartland,TX
Summary
Overview
20
years of professional experience
Work History
Raytheon
Combat Systems Senior Technician
09.2023 - Current
Job overview
- (DoD) Active Secret Security Clearance
- Align, Test and troubleshoot the Improved Target Acquisition System (ITAS)
- Test and troubleshoot the Fire Control Subsystem (FCS)
- Align, Test and troubleshoot Sub-Assemblies for the ITAS unit
- Perform Acceptance Test on ITAS unit and FCS unit
- Perform Leak Tests on ITAS unit and FCS unit
- Proficient at reading and interpreting drawings
- Perform measurements and troubleshoot electronic test equipment
- Experience using a variety of digital and other electronic test equipment
- Familiar with different measuring device models
- Experience using the Thermotron chambers
- Knowledge of ESS Burn-In and Vibe Testing
- Order Sub-Assemblies replacement parts
- Replace damaged Sub-Assembles
- Assist Engineering with troubleshooting
- Proficient at using Loctite’s, Double-Bubble, and other Solvents
- Proficient at using BlackBody temperature controller, Oscilloscopes, Digital Meters, DC Power Supplies
- Proficient at a variety or torque tools, Allen wrenches, drivers, screwdrivers, and bits
- Collaborate with Mechanical and System Engineering
- Proficient in using Prism, SAP, CMES, and Common PDM Windchill
- Test systems for DCMA Auditors
- Knowledge of OSHA Safety Guidelines
- Knowledge of EHS and PPE requirements
- 6Sigma Certified
- Hoisting Crane Certified
- Highly Effective Performance Rating
- Performed troubleshooting and diagnosis on malfunctioning equipment.
- Reduced downtime for critical systems through effective troubleshooting and root-cause analysis.
Raytheon
Additive Manufacturing Engineering Technician
06.2015 - 09.2023
Job overview
- Create Engineering Prototypes, Tooling and Fixtures to improve the functionality of parts
- Contributed to a safer working environment through strict adherence to safety protocols, guidelines, and regulations.
- Collaborated closely with engineers in developing new products or improving existing ones, providing valuable input from a technician's perspective.
- Improved equipment reliability by performing regular maintenance and calibrations.
- Consistently met high-quality standards for all completed work while adhering to established timelines, ensuring client satisfaction with final results.
- Operated 3D Systems SLA 501 & 503 Machines
- Operated 3D Systems SLS Powder Machine
- Operated Stratasys PolyJet Machine
- Operated Concept Laser Metals M2 Gen 1, Gen 5, and XLine Machines
- Knowledge of RPMi and Arcam Metals Machines
- Proficient in Post Op processes
- Proficient in Repairing Prototypes and Fixtures
- Proficient with GrabCad and Paint 3D Software
- Performed Tensile Bar strength testing
- Ability to mix SLS Duraform Powder
- Highly Effective/Exceeds Performance Ratings
- Quality Audit Specialist/Facilitator
- Sieve Aluminum, Titanium, Inconel, Stainless Steel and Duraform Powders
- Operate Curing Ovens and Sand Blasters
- Communicate and Coordinate with Customers
- Create Transportation Requests, Package and Ship parts to Customers
- Perform routine Preventive Maintenance on Machines
- Troubleshoot failures and PLC errors
- Respirator trained
- Validation and Qualification testing
- Employee Recognition Award
- Safety Starpoint and Ergo Starpoint
- Order chemicals and materials
- SAP/Prism
- Created QOI/SP documentation
Raytheon
Production Associate Sr.
04.2013 - 06.2015
Job overview
- (DoD) Active Secret Security Clearance
- Classified Secret Room ESSM Assembler
- Read and interpret drawings for hardware installation and inspection
- Installed hardware per SP and Work Instructions
- Deburred Powderpainted Parts
- Knowledge of JDEdwards Program
- Performed Marking/Touch-up on Powderpaint parts
- Experienced using a variety of adhesives and bonding agents
- Experienced using helicoil installation tools, C-Clamps, and Rivet Guns
- Experienced using calipers to measure parts per drawing requirements
- Created RFTA's
- 6Sigma Core Certified
- Safety Starpoint
- Experienced using Thermtron Chambers.
- Organized work to meet demanding production goals.
- Inspected final products to assess compliance with quality standards and established tolerances.
Raytheon
Technical Support Associate Sr.
02.2008 - 02.2013
Job overview
- (DoD) Active Secret Security Clearance
- Perform Unit test on ITAS system
- Perform Final Acceptance test on ITAS, FTL's and FCS's
- Align and troubleshoot the ITAS system
- Align and troubleshoot FTL's
- Align and troubleshoot sub-assemblies
- Replace damaged parts
- Reconfiguration and configuration of parts
- Pit Standard Type Forklift or Reach Fork Certified
- Hoisting Crane Certified
- Proficient in using Prism, VM, and Word Programs
- Ability to read and interpret drawings
- Perform measurements and troubleshoot electronic test equipment
- Experience using a variety Digital and other electronic test equipment
- Familiar with different measuring device models
- Work in different indoor/outdoor environments
- Experience using the Thermotron chambers
- Knowledge of ESS Burn-In and Vibe Testing
- Assist Engineering with Qualification Testing on the IE project
- Performed demos for clients and for future customers
- Collaborated with Customers for final acceptance of products
- Assisted engineering on the first prototypes of the GSI project
- Conduct morning meetings when needed
- Knowledge of OSHA Safety Guidelines
- 6Sigma Certified
- Employee Recognition Award.
- Monitored systems in operation and quickly troubleshot errors.
Fiber Systems International
Fiber Optic Assembler
10.2005 - 01.2008
Job overview
- Conduct fusion splicing between two separate fiber optic cables
- Cleave fiber from connectors after curing
- Soldered inch sized wire into pin socket connectors
- Polished connectors ST's, SC's and TFOCA
- Inject epoxy into connector and terminate the end of fiber optic cable
- Calculated, measured and cut cables to desired lengths
- Crimped connectors using automated and manual tools
- Mixed and prepared epoxy for connector installation
- Increased production efficiency by assembling components quickly and accurately.
- Assembled components with minimal supervision, exceeding expected project milestones.
- Collaborated effectively with team members to meet production targets consistently.
Texas Instruments- Volt Temp Agency
Manufacturing Specialist
01.2004 - 03.2004
Job overview
- Prepared wafers for the diffusion process
- Operated the HD040 and HD041 machines
- Performed chemical changes on the machines
- Received and transported wafers to workstations
- Clean-Room Environment.
Omnicom- Snelling Temp Agency
Tester/Refurbisher/QC
01.2005 - 04.2005
Job overview
- Inspected the quality of cell phones
- Programmed cell phones with appropriate software
- Tested cell phones for mechanical failures
- Replaced damaged parts on the cell phones.
Samsung- Verion Temp. Agency
Special Project
08.2004 - 01.2005
Job overview
- Programed software into cell phones
- Inspected the quality of cell phones along with packaging
- Unpacked and verified hardware materials
- Created and installed bar coded labeling.
CDS Datacom- Snelling Temp. Agency
Fiber Optic Tester
01.2004 - 03.2004
Job overview
- Cleaned fiber optic connectors
- Polished the connectors
- Tested cables and verified diameter of fiber
- Created records of all test data.
Education
Eastfield Community CollegeMesquite, TX
AAS Electronics/Computer Technology
01.2007
University Overview
- This curriculum is designed to prepare a graduate to work as a technician on devices that require digital circuits such as computers, test equipment, automatic control units and central distribution systems. The student will learn schematic interpretation, test equipment usage, and technical communications.
- GPA: 3.48
Skills
- 20 years' experience in Aerospace and Defense Manufacturing Industry
- Active Secret Security Clearance
- Quality Audit Specialist/Facilitator
- R6Sigma Specialist/Core Apprentice Certification
- Ability to read and interpret drawings
- Experience with customers collaboration
- Experience conducting demos and tours
- Perform measurements, troubleshoot electronic equipment, System and Sub-Assembly failures
- Experienced using a wide variety Digital and electronic test equipment
- Train new Program support
- Experienced Viscosity and pH tester
- Knowledge of MSDS
- Ability to type 40 words per min
- Strong Verbal and Communication Skills
- Compliant to procedures/regulatory requirements
- Experienced with various measuring devices
- Experienced with manual and electric tools
- Experienced Microsoft User, SAP, Prism
- Experienced in GradCad 3D Print Software
- Knowledge of AutoCad software
- Experienced Haas TcmIS/Incora user
- Soldering
- Knowledge of OSHA/EHS safety requirements
- Safety Starpoint, Ergo Starpoint
- Conduct Monthly FOD Audits
- Satellite Accumulation Area Inspector
- Experienced Assistant Manager
- Knowledge of Microsoft Office (Word, Excel, PowerPoint)
- SAP PRISM
Timeline
Combat Systems Senior Technician
Raytheon
09.2023 - Current
Additive Manufacturing Engineering Technician
Raytheon
06.2015 - 09.2023
Production Associate Sr.
Raytheon
04.2013 - 06.2015
Technical Support Associate Sr.
Raytheon
02.2008 - 02.2013
Fiber Optic Assembler
Fiber Systems International
10.2005 - 01.2008
Tester/Refurbisher/QC
Omnicom- Snelling Temp Agency
01.2005 - 04.2005
Special Project
Samsung- Verion Temp. Agency
08.2004 - 01.2005
Manufacturing Specialist
Texas Instruments- Volt Temp Agency
01.2004 - 03.2004
Fiber Optic Tester
CDS Datacom- Snelling Temp. Agency
01.2004 - 03.2004
Eastfield Community College
AAS Electronics/Computer Technology
Similar Profiles
ABIGAIL BARTONABIGAIL BARTON
Manufacturing Technician /Crew Trainer at RaytheonManufacturing Technician /Crew Trainer at Raytheon
John GreenJohn Green
Operations Supply Chain Finance Supervisor/Manager at RaytheonOperations Supply Chain Finance Supervisor/Manager at Raytheon
Rishi PatelRishi Patel
Affordability and Design to Cost Engineer at RaytheonAffordability and Design to Cost Engineer at Raytheon
tony Cupparitony Cuppari
Principal Member of Technical Staff- Supplier Eng at RaytheonPrincipal Member of Technical Staff- Supplier Eng at Raytheon
Uralisa MillsUralisa Mills
Product Manager at Hotwire CommunicationsProduct Manager at Hotwire Communications