Tim King
Summary
Personable and dedicated with strong aptitude for hands-on work and problem-solving. Familiar with basic principles of metalwork and welding, and capable of reading blueprints and technical drawings. Ready to contribute to high-quality fabrication projects and ensure precise, durable results.
Overview
17
17
years of professional experience
Work History
Lawn Care Technician
Weed Pro Lawn Care
01.2025 - Current
- Collaborated with team members to complete large-scale projects on time and within budget constraints.
- Removed weeds, hazards, and debris from common pathways to improve usability.
- Used trimmers and chainsaws for grounds maintenance, brush clearing, and tree removal and thinning.
- Demonstrated flexibility, adapting to scheduling changes and last-minute requests while maintaining a positive attitude.
Mechanic
Alpha Rental Tools
10.2023 - 07.2024
- Performed diagnostic and troubleshooting procedures to find and identify root causes of mechanical issues.
- Kept equipment in good working order by following operating instructions, troubleshooting breakdowns, and maintaining supplies.
- Replaced damaged, missing, or defective parts with new and refurbished components.
- Maintained a safe working environment at all times by adhering to company guidelines and OSHA regulations, reducing workplace accidents.
- Improved workshop efficiency with proper organization and inventory management of tools and parts.
- Applied strong problem-solving skills when faced with unusual problems or challenges during repairs, ensuring optimal solutions were put into action.
- Listed work performed on each unit in order to properly invoice customers.
- Optimized inventory control by maintaining accurate records of parts usage and restocking as needed.
- Reduced equipment downtime by performing routine maintenance on lawn mowers, snow blowers, and other small machinery.
- Upheld company values while interacting with customers, creating positive relationships built on trust and reliability.
- Lubricated, cleaned and repaired parts and components to carry out effective small engine preventive and reparative maintenance processes.
- Tested and inspected engines to determine malfunctions, locate missing and broken parts and verify repairs using diagnostic instruments.
- Followed factory service manual protocols to restore, maintain and test small engine equipment.
- Removed, disassembled, inspected and completely renewed engines to perform complete equipment overhauls.
- Dismantled engines using hand tools and examined parts for defects.
- Restored and modified equipment using welding and metal fabrication techniques.
- Diagnosed and repaired hydraulic and electrical systems to maintain equipment function.
- Replaced defective wiring systems, hydraulics, and braking systems to return machines to service.
- Analyzed malfunctioning equipment and determined type of repairs required.
- Reassembled and tested equipment after repairs to verify function and performance.
- Selected hand tools, power tools and precision measuring instruments according to task requirements.
- Developed custom solutions to address unique challenges posed by complex or outdated machinery.
- Exhibited adaptability by working on various types of heavy equipment including bulldozers, excavators, loaders, and cranes.
- Maintained a clean work environment that promoted safety while enhancing overall productivity.
- Provided on-site emergency repair services, minimizing operational disruptions during critical project phases.
- Increased customer satisfaction through timely completion of repair projects while adhering to high-quality workmanship standards.
- Performed welding, soldering and brazing to repair damaged components on mobile heavy equipment.
- Maintained Fleet of Skid Steers, Excavators, Diesel generators.
- Maintained lots of small engine rental equipment like tamps, chainsaws, jack hammers, pressure cleaners,
- Maintained Mini skids, Excavators,Georgia buggies, trenchers.
Service Technician
D and D Outdoor Equipment.
02.2021 - 10.2023
- Replaced defective wiring systems, hydraulics, and braking systems to return machines to service.
- Removed worn or faulty components for replacement or repair.
- Restored and modified equipment using welding and metal fabrication techniques.
- Performed routine maintenance and repairs on heavy equipment such as bulldozers and backhoes.
- Selected hand tools, power tools and precision measuring instruments according to task requirements.
- Troubleshot equipment malfunctions utilizing diagnostic tools and technical manuals.
- Maintained meticulous records of all repair work that was made to machines and equipment.
- Replaced worn or damaged parts and components, ensuring equipment safety and functionality.
- Fabricated and installed custom parts and components to meet specific equipment needs.
- Conducted thorough safety checks and maintenance, reducing incidence of equipment-related accidents on job site.
- Provided on-site emergency repair services, minimizing operational disruptions during critical project phases.
- Maintained accurate records of equipment maintenance, repairs, and parts inventory to ensure efficient tracking and cost control.
- Improved workshop efficiency with proper organization and inventory management of tools and parts.
- Ensured seamless communication with coworkers, fostering an environment conducive to teamwork and collaboration on challenging projects.
- Reduced equipment downtime by performing routine maintenance on lawn mowers, snow blowers, and other small machinery.
- Contributed to a positive work environment by demonstrating a strong work ethic and dedication to customer satisfaction.
- Organized and maintained hand tools and equipment used daily to maximize work performance.
- Changed out parts, fixed systems and refurbished elements to complete repairs on different types of small engines.
- Tested and inspected engines to determine malfunctions, locate missing and broken parts and verify repairs using diagnostic instruments.
- Followed factory service manual protocols to restore, maintain and test small engine equipment.
Metal Fabricator
Kubota Manufacturing Of America
05.2020 - 12.2022
- Conducted rigorous quality control checks, ensuring all products met strict industry standards.
- Improved work area organization by implementing efficient storage solutions for tools, materials, and finished products.
- Performed routine maintenance on fabrication equipment, prolonging the life of machinery and preventing costly repairs or downtime.
- Maintained high standards of craftsmanship, ensuring all fabrications met aesthetic and functional requirements.
- Utilized various metalworking tools such as shears, press brakes, plasma cutters, and punches to produce precise cuts and bends in sheet metals.
- Adhered strictly to industry regulations and safety standards, maintaining a clean work environment free of hazards.
- Operated welding equipment to assemble and repair metal structures and elements.
- Followed Operational Safety and Health Administration (OSHA) regulations to promote safe equipment operation and workplace safety.
- Lifted or moved materials and finished products using large cranes.
- Altered and trimmed existing metal fabrications to meet size and position requirements.
- Straightened warped or bent parts using sledges, hand torches, or bulldozers.
- Maintained machinery and tools to keep fabrication processes running smoothly.
- Complied with safety regulations while operating machinery and tools to protect against injury.
Steel Fabricator
Titan Steel Corporation
01.2019 - 03.2020
- Set up and operated production equipment according to daily work orders and safety procedures
- Observed safe work practices and procedures as instituted by the company
- Maintained workplace equipment and inspected it daily for damage
- Operated equipment and welding tools safely by following manufacturer instructions
- Uncovered issues and addressed immediately with Foreman to resolve
- Observed the approved process for assembly
- Transported machinery using forklifts, cranes and hoists
- Performed basic tool maintenance and lubrication based on scheduled service needs and emergency repair requirements
- Setup machines to efficiently meet daily work orders and specific tool sharpening demands
- Used tracer components to duplicate finished pieces and create smooth and accurate finishes
- Met with supervisor every morning to discuss case challenges and brainstorm issue resolution strategies
- Used hand tools to finish projects by grinding or filing surfaces to achieve smooth finishes and sharp points
- Inspected machines and machine parts for tool effectiveness and fixed or replaced components to optimize performance
Warehouse Associate
Eskimo Cold Storage
03.2018 - 01.2019
- Cleaned and maintained warehouse in compliance with OSHA safety standards
- Inspected and moved products to designated areas in warehouse
- Staged products between receiving, storage and shipping areas to accurately transfer items
- Affixed accurate labels to customer packages to prevent unnecessary delays
- Counted and stocked merchandise as specified by inventory control log
- Inventoried items with daily cycle counts and monthly audits, investigating discrepancies to keep data accurate
- Loaded perishable and non-perishable items into trucks according to planned delivery schedules
- Maintained accurate and current order and shipment forms, inventory documentation and customer records
- Identified defective, lost or missing merchandise and promptly reported issues to supervisor
- Operated forklifts and other transportation vehicles to move merchandise to and from target destinations
- Contributed ideas on ways to improve or optimize warehousing procedures
- Unloaded freight using pallet jacks to transport heavy items to locations in warehouse
- Organized and positioned product cases in produce warehouse and walk-in cooler
- Scanned container labels to verify contents and determine target destination using RF scanners
- Unloaded incoming products off trucks, moved boxes to staging area, sorted items and transported to final storage locations
- Provided top product and material delivery quality control by eliminating downtime to maximize revenue
- Prepared inventory for shipment by attaching tags and labels, preparing shipment documents and securing products on pallets
- Methodically picked, packed and labeled merchandise to prepare for shipment
- Attached identifying tag or labels to materials or marked information on cases, bales, or other containers
- Optimized project completion time by multitasking duties using heavy equipment
- Exceeded specific team goal by partnering with staff to share and implement best practices
- Monitored work areas for cleanliness and obstacles, moving cartons and boxes to keep all aisles free of clutter for ease of movement
- Accurately recorded inventory levels to support completion of order requests and audits
- Managed vendor relationships to support supply chain and maintain product quality
- Tracked inventory, conducted cycle counts and audits and resolved issues to maintain accurate records
- Examined incoming shipments to verify quantity and quality, returning unacceptable shipments to suppliers for refunds or replacement
- Received, stored, and shipped goods and materials
- Examined incoming and outgoing shipments, rejected damaged items and appropriately recorded any discrepancies
- Considered specific product requirements and accessibility when managing and organizing storage areas
- Examined packages and goods for damage and notified vendors of specific issues requiring replacement
- Carefully arranged items on store racks and shelves ensuring correct location and prices
- Rotated goods in inventory by following 'first in, first out' approach to keep shelves organized and well-stocked
- Recognized and reported defective material and equipment
Manager
Matco Tools
03.2007 - 02.2018
- Accomplished multiple tasks within established timeframes.
- Maximized performance by monitoring daily activities and mentoring team members.
- Reduced operational costs through comprehensive process improvement initiatives and resource management.
- Developed and maintained relationships with customers and suppliers through account development.
- Controlled costs to keep business operating within budget and increase profits.
- Developed a strong company culture focused on employee engagement, collaboration, and continuous learning opportunities.
- Conducted market research to identify customer needs and adjusted product offerings accordingly, increasing customer satisfaction.
- Maintained positive customer relations by addressing problems head-on and implementing successful corrective actions.
- Successfully managed budgets and allocated resources to maximize productivity and profitability.
- Maintained professional demeanor by staying calm when addressing unhappy or angry customers.
Technician
Thunder cycles
05.2003 - 12.2004
- Fabrication-builder
- Optimized system performance thorough testing and analysis.
- Diagnosed and repaired problems with electrical and mechanical systems.
- Performed routine maintenance tasks for optimal motorcycle performance and longevity.
- Performed maintenance on different categories and brands of motorcycles.
- Cleaned, sanded, repaired and replaced engine parts before reassembly.
- Maintained up-to-date knowledge of motorcycle technology advancements through continued education opportunities and professional development courses.
- Exhibited strong attention to detail in all aspects of repair work, preventing errors that could lead to costly rework or unsafe riding conditions.
- Fabricated parts and components for repairs to motorcycle frame adding support and durability.
- Performed brake repairs and servicing for effective and safe braking.
- Replaced defective parts using hand or powers tools, arbor presses and flexible power presses.
Education
Associates Degree - Harley Davidson
Universal Technical Institute
Orlando, FL11-2005
High School Diploma -
William T. Dwyer
Palm Beach Gardens, FL05-2003
Skills
- Grinding techniques
- Plasma cutting
- Gas metal arc welding
- Sheet metal work
- Hand tool proficiency
- Precision cutting
- Repair work
- Power tool proficiency
- Problem-solving
- Heavy lifting
- Reliability
- Welding
Timeline
Lawn Care Technician
Weed Pro Lawn Care
01.2025 - Current
Mechanic
Alpha Rental Tools
10.2023 - 07.2024
Service Technician
D and D Outdoor Equipment.
02.2021 - 10.2023
Metal Fabricator
Kubota Manufacturing Of America
05.2020 - 12.2022
Steel Fabricator
Titan Steel Corporation
01.2019 - 03.2020
Warehouse Associate
Eskimo Cold Storage
03.2018 - 01.2019
Manager
Matco Tools
03.2007 - 02.2018
Technician
Thunder cycles
05.2003 - 12.2004
Associates Degree - Harley Davidson
Universal Technical Institute
High School Diploma -
William T. Dwyer
Similar Profiles
Matthew FosterMatthew Foster
Lawn Care and Snow Removal Technician at Weed Pro: Lawn Care & Snow Removal ExpertsLawn Care and Snow Removal Technician at Weed Pro: Lawn Care & Snow Removal Experts
Paul ConnerPaul Conner
Customer Service & Sales Representative at Weed Man Lawn CareCustomer Service & Sales Representative at Weed Man Lawn Care
Anthony Acampora JrAnthony Acampora Jr
Sales Manager at Weed Man Lawn CareSales Manager at Weed Man Lawn Care