Timothy Brown
Greensboro,NC
Overview
22
22
years of professional experience
Work History
Electrical Panel Builder
Cross
Greensboro, NC
01.2023 - Current
- Panel building from schematics or work order.
- Apply wire harnesses to product
- Remove and add accessory wiring per the wiring diagram and wire run list.
- Communicate problems with the wiring diagram, outline drawing and/or product with supervision and Engineering.
- Can read complex wiring schematics or Drawings
- Assure quality of connections and document all work produced
- Ensure all tools being used are properly calibrated
- Follow standard procedures for wiring
- Comply with company rules and regulations
- Operate equipment/tools in a safe and efficient manner as directed
Avionics Technician
Zimm Cabin Solutions
High Point, NC
03.2022 - Current
- Fabricated electrical harnesses and assemblies and installs wiring used in the assembly and integration of aircraft parts and assemblies in accordance with Design Engineering instructions.
- Operated Laser wire marker and printers to direct or indirectly mark electrical wiring, wiring harnesses and electrical assemblies.
- Worked with energized AC and DC circuits according to all safety requirements.
- Fabricated and programed security keypads based on customer specifications.
- Read and interpreted wiring diagrams, engineering drawings, test plans, and work instructions.
- Detected and diagnosed malfunctions and conducted repairs using various test equipment Fluke meter, Megohmmeter, Keithley meters, volt meter.
- Maintained traceability of all materials used during manufacturing and properly filled out paperwork to ensure compliance with all inspection and FAA requirements.
- Manufactured harnesses for Gallies, Cabinets, Closets, Laboratories. Inserted light harnesses IAW Engineering's Drawings.
- Created electrical boards for various uses, based on customer needs.
- Manufactured wiring harness and electrical assemblies with single or multiple breakout points as well as single or multiple termination points according to all applicable regulations and instructions.
- Maintained equipment by completing instructed preventive maintenance requirements, following manufacturer's and DFP instructions. Troubleshooting malfunctions and reporting to management for equipment repairs.
- Cross trained and was utilized in various other aspects of the production process.
Electrician
Piedmont Hoist and Crane
Winston-Salem, NC
01.2021 - 03.2022
- Wiring of panels, hoists, and cranes.
- Installing conduit, c-track, cord reels, and Igus systems.
- Electrical troubleshooting.
- Help maintain standards of PH&C Panel Shop.
- Assist in training of incoming electricians.
- Assist in inventory control of electrical components.
- Work with engineering to insure that 'as built' drawings are complete and accurate.
Quality Inspector
Cross Technologies
Winston-Salem, NC
01.2020 - 01.2021
- Inspection wire harnesses for different types of customers!
- Making sure quality is going out the door!
- Making sure length and labels are correct.
- Checking for broken or lose wires.
- Make sure the wire rings out per drawings!
- Check to be sure that the technicians are following the drawings, flag notes and making sure Rev levels are Correct on the labels.
Avionics Technician
North State Aviation
Winston-Salem, NC
09.2019 - 12.2019
- Installed wire harness for install of seat cable and USB connector and headset jacks.
- Installed light strobes on tail and wing of 737.
- WAPS and LRU's.
- Functional test for air mask, lighting, exiting signs.
- Installed wheel well lights for landing gear.
- Make complicated wire terminations (Coax, Shielded Splices, Quadrant Cables).
- Review wiring practices and tech references with the ability to read/understand wiring manual prints.
- Perform such typical maintenance functions as cabling, component removal/installation, wire harness removal/installation, fabrication/repair of wire assemblies, and continuity checks.
- Determine if work can safely be accomplished if aircraft is in a power-on mode and be able to conduct necessary testing if in a power-on mode.
- Fabricate and install all wiring assemblies, static lines, and associated mechanical equipment.
- Follow all applicable specifications to accomplish a specific task.
- Maintain a clean and safe working environment.
- Perform work within estimated hours.
- Follow all safety procedures and specifications.
- Execute all required paperwork in connection with assigned normal duties.
- Use and operate ground support equipment, as applicable and if qualified, in a safe manner.
Aircraft Assembler
Honda Aircraft Company Inc
Greensboro, NC
09.2018 - 09.2019
- Use Blueprints, measuring instruments and Honda process specs to build the new Honda HA-420 Business Aircraft.
- Recognized expert in processing work orders, interpreting Quality Notifications, researching blueprints in Team Center, and applying Process Specifications while signing-off operations and documenting all characteristics in SAP.
- Coordinates with Quality Assurance in the performance of Functional Test Procedures.
- Performs routine and build tasks completion as defined by management within pre-defined time frame.
- Follows all Honda safety program with proper use of equipment and personal protective equipment.
- Performs complex assembly, installation, and fitting of detail parts and structures.
- Installs aircraft systems and sub systems to include flight controls, hydraulics, landing gear, pneumatics, lighting, power plant, fuel system, doors.
- Researches parts for aircraft build up. Writes and completes Quality Notifications. Perform complex assembly, fitting of detail parts and structures, and installation.
- Mentors new employees to be proficient in Honda Aircraft standards, policies, procedures, safety, PPE, 5S, and the use of SAP.
Avionics Fabrication Shop Technician
HAECO Cabins Solutions
High Point, NC
03.2007 - 01.2018
- Fabricated electrical harnesses and assemblies and installs wiring used in the assembly and integration of aircraft parts and assemblies in accordance with Design Engineering instructions.
- Operated Laser wire marker and printers to direct or indirectly mark electrical wiring, wiring harnesses and electrical assemblies.
- Worked with energized AC and DC circuits according to all safety requirements.
- Fabricated and programed security keypads based on customer specifications.
- Read and interpreted wiring diagrams, engineering drawings, test plans, and work instructions.
- Detected and diagnosed malfunctions and conducted repairs using various test equipment Fluke meter, Megohmmeter, Keithley meters, volt meter.
- Maintained traceability of all materials used during manufacturing and properly filled out paperwork to ensure compliance with all inspection and FAA requirements.
- Manufactured harnesses for Gallies, Cabinets, Closets, Laboratories. Inserted light harnesses IAW Engineering's Drawings.
- Created electrical boards for various uses, based on customer needs.
- Manufactured wiring harness and electrical assemblies with single or multiple breakout points as well as single or multiple termination points according to all applicable regulations and instructions.
- Maintained equipment by completing instructed preventive maintenance requirements, following manufacturer's and DFP instructions. Troubleshooting malfunctions and reporting to management for equipment repairs.
- Cross trained and was utilized in various other aspects of the production process.
Maintenance Technician
Kelly Temporary Services
High Point, NC
04.2006 - 03.2007
- Maintained injection systems, production presses and paint scheme units.
Electrical/Plumbing Engineer
Eagle Air Compressors
Greensboro, NC
11.2004 - 03.2006
- Fabricated and assembled high pressure air line systems.
- Responsible for the set-up, maintenance, troubleshooting, and reworking of machinery.
- Proficient at reading and understanding blueprints and wiring schematics provided by the Engineers.
- Wired light systems and control panel on trailers.
- Wired 1phase, and 3phase motors and fabricated wire harnesses for electrical control panels.
- Wire Electrical panels as well as plump high pressure Gage panels.
- Inserted wire Harnesses for Wiring Cabinets, specialized unites.
- Ran Cooper tubing inside of control panels for compressed air controls.
Timeline
Electrical Panel Builder
Cross
01.2023 - Current
Avionics Technician
Zimm Cabin Solutions
03.2022 - Current
Electrician
Piedmont Hoist and Crane
01.2021 - 03.2022
Quality Inspector
Cross Technologies
01.2020 - 01.2021
Avionics Technician
North State Aviation
09.2019 - 12.2019
Aircraft Assembler
Honda Aircraft Company Inc
09.2018 - 09.2019
Avionics Fabrication Shop Technician
HAECO Cabins Solutions
03.2007 - 01.2018
Maintenance Technician
Kelly Temporary Services
04.2006 - 03.2007
Electrical/Plumbing Engineer
Eagle Air Compressors
11.2004 - 03.2006