Overview
Work History
Education
Skills
Certification
Additional Information
Timeline
Generic

Timothy Coakley

Farmer City,IL

Overview

10
10
years of professional experience
1
1
Certification

Work History

Pipefitter

Worley Field Services
10.2022 - 07.2024
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
  • Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
  • Threaded pipes using piping machines.
  • Replaced faulty parts and repaired structural damages to pipes and related components.
  • Connected piping systems to water heaters, boilers, pumps and auxillary equipment to complete installations.
  • Fabricated pipe sections and components to specification using cutting, threading equipment.
  • Monitored pipeline pressure and flow rates to facilitate safe and efficient operation.
  • Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
  • Calibrated piping systems and components to optimize performance.
  • Installed new systems and connected piping to existing components by bolting and threading.
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
  • Performed preventive maintenance to clean, adjust and lubricate piping systems and parts.
  • Inspected and tested existing pipe systems to identify system defects and malfunctions.
  • Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
  • Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
  • Fabricated piping pieces and components in line with design specifications for each system.
  • Planned pipe system layout, installation and repair according to specifications.
  • Used clamps and brackets to attach pipes to walls, structures and fixtures.
  • Interpreted blueprints to determine locations, quantities, and sizes of materials required.
  • Cut and drilled holes in walls to permit passage of pipes.
  • Inspected sewers and piping systems to assess quality and condition.
  • Measured, threaded, and cut materials to correct angles.
  • Filled pipe systems with water and air to determine location of leaks.
  • Assisted with repairs to steam, drainage, and sewer lines.
  • Reviewed blueprints and project specifications to determine correct plumbing solutions.
  • Eliminated risks by correctly identifying potential safety hazards.
  • Tested and operated hydraulic and pneumatic equipment for heating and cooling systems.

Pipefitter

Austin Industrial
03.2020 - 10.2022
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
  • Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
  • Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
  • Threaded pipes using piping machines.
  • Replaced faulty parts and repaired structural damages to pipes and related components.
  • Connected piping systems to water heaters, boilers, pumps and auxillary equipment to complete installations.
  • Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
  • Monitored pipeline pressure and flow rates to facilitate safe and efficient operation.
  • Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
  • Calibrated piping systems and components to optimize performance.
  • Installed new systems and connected piping to existing components by welding, bolting and threading.
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
  • Performed preventive maintenance to clean, adjust and lubricate piping systems and parts.
  • Inspected and tested existing pipe systems to identify system defects and malfunctions.
  • Operated ground microphones and listening discs to locate hidden water line leaks.
  • Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
  • Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
  • Fabricated piping pieces and components in line with design specifications for each system.
  • Prepared budgets and estimated costs for potential work on piping systems.
  • Planned pipe system layout, installation and repair according to specifications.
  • Used clamps and brackets to attach pipes to walls, structures and fixtures.
  • Interpreted blueprints to determine locations, quantities, and sizes of materials required.
  • Cut and drilled holes in walls to permit passage of pipes.
  • Inspected sewers and piping systems to assess quality and condition.
  • Measured, threaded, and cut materials to correct angles.
  • Filled pipe systems with water and air to determine location of leaks.
  • Assisted with repairs to steam, drainage, and sewer lines.
  • Secured rising mains and boiler piping to structural supports in new construction and remodeling projects.
  • Reviewed blueprints and project specifications to determine correct plumbing solutions.
  • Eliminated risks by correctly identifying potential safety hazards.

Pipefitter

Worley Field Services (Formerly Jacobs)
05.2014 - 03.2020
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
  • Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
  • Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
  • Threaded pipes using piping machines.
  • Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
  • Monitored pipeline pressure and flow rates to facilitate safe and efficient operation.
  • Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
  • Connected piping systems to water heaters, boilers, pumps and auxillary equipment to complete installations.
  • Replaced faulty parts and repaired structural damages to pipes and related components.
  • Calibrated piping systems and components to optimize performance.
  • Installed new systems and connected piping to existing components by welding, bolting and threading.
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
  • Performed preventive maintenance to clean, adjust and lubricate piping systems and parts.
  • Inspected and tested existing pipe systems to identify system defects and malfunctions.
  • Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
  • Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
  • Operated ground microphones and listening discs to locate hidden water line leaks.
  • Fabricated piping pieces and components in line with design specifications for each system.
  • Prepared budgets and estimated costs for potential work on piping systems.
  • Planned pipe system layout, installation and repair according to specifications.
  • Used clamps and brackets to attach pipes to walls, structures and fixtures.
  • Interpreted blueprints to determine locations, quantities, and sizes of materials required.
  • Cut and drilled holes in walls to permit passage of pipes.
  • Assisted with repairs to steam, drainage, and sewer lines.
  • Filled pipe systems with water and air to determine location of leaks.
  • Measured, threaded, and cut materials to correct angles.
  • Inspected sewers and piping systems to assess quality and condition.
  • Secured rising mains and boiler piping to structural supports in new construction and remodeling projects.
  • Reviewed blueprints and project specifications to determine correct plumbing solutions.
  • Eliminated risks by correctly identifying potential safety hazards.
  • Tested and operated hydraulic and pneumatic equipment for heating and cooling systems.
  • Set up appliances like water heaters, filters, and dishwashers with correct settings to maximize performance.

Education

GED -

Parkland College
Champaign, IL

Skills

  • Work Order Management
  • Equipment testing
  • Plumbing
  • Pressure testing
  • Commercial construction experience
  • Hydraulics
  • Commercial/Industrial pipefitting
  • Material Cutting
  • Materials Ordering
  • Piping specifications
  • Safety Procedures
  • Project Management
  • Pneumatic Systems
  • Emergency Repairs
  • Pipefitting
  • Worksite safety
  • Blueprints and Specifications
  • Hand and power tools
  • Installation and maintenance
  • Hydraulic systems
  • Material prepping
  • Material Selection
  • Blueprint Analysis
  • Diagram interpretation

Certification

NCCER:

  • Level 4 certified Industrial Pipefitter
  • Knowledge and performance verification


Additional Information

References:

  • Ron Boulware

Phone: 217-775-7201


  • Kevin Forsythe

Phone: 815-503-2055


  • Stefan Brady

Phone: 346-573-3665

Timeline

Pipefitter

Worley Field Services
10.2022 - 07.2024

Pipefitter

Austin Industrial
03.2020 - 10.2022

Pipefitter

Worley Field Services (Formerly Jacobs)
05.2014 - 03.2020

GED -

Parkland College

Similar Profiles

CREATE PROFILE
Timothy Coakley