Installed electrical conduit and wiring for power, controls, and lighting.
Installed electrical wiring through conduits and holes in both flooring and walls.
Tested wiring and other system parts for electrical flow and function.
Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
Disconnected and removed motors and pumps.
Inspected equipment for defects and safety hazards and completed necessary repairs.
Tested, troubleshot, and calibrated equipment in shop and field.
Followed safety protocols and best practices for installation, maintenance, or repair work..
Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
Diagnosed problems with electrical systems and rewired components to restore safe flow of electricity.
Followed safety protocols on job sites.
Disassembled broken, defective, and worn out equipment to aid with repairs.
Maintained tools and equipment in good working condition.
Cleaned and lubricated components to maintain optimal performance.
Operated variety of power tools and hand tools.
Troubleshot various types of equipment during installation and processes.
Lead Field Service Technician
Campbell's Pool & Spa
10.2008 - 09.2019
Managed on-site and off-site installation, repair, maintenance, and test tasks.
Followed safety procedures to avoid injuries in field.
Operated hand tools and power equipment according to company safety procedures.
Completed partial or full dismantling of equipment to quickly repair or replace defective components and restore functionality.
Responded quickly to emergency maintenance requests for timely on-call support.
Provided technical support to troubleshoot, repair and maintain operational efficiencies in hydraulic, mechanical, and electrical systems.
Installed new equipment and explained operation and routine maintenance protocols to customers.
Reviewed technical documentation to complete equipment maintenance and repair.
Established positive customer relationships by providing punctual, cost-effective solutions.
Discussed and recommended service options with customers and explained costs involved.
Reviewed aspects of job upon completion to alleviate equipment failure and prevent callbacks.
Maintained company field response vehicle stocked with repair and replacement parts valued over $[Amount].
Interpreted equipment diagrams and blueprints to fully understand mechanical and electrical systems in need of service.
Developed and implemented customized service plans to meet customer needs.
Attended [Type] and [Type] workshops and team meetings to maximize technical knowledge.
Tested systems, noting issues and completing preventive maintenance.
Diagnosed and repaired problems with electrical and mechanical systems.
Worked with diverse types of weather and ground conditions.
Managed maintenance activities, supervised staff and inspected equipment.
Followed established procedures for inspection of belts, drives and motors, performing needed maintenance.
Tended to machines, troubleshot malfunctions and completed basic repairs to keep equipment fully functional and well-maintained.
Maintained strong focus on safety and efficiency to provide comprehensive support to personnel performing skilled repairs.
Demonstrated to customers proper methods for operating equipment after it had been installed.
Inspected, evaluated and calibrated electrical and mechanical systems and components.
Researched and implemented new technologies and equipment.
Liaised with internal departments to optimize productivity and efficiency.
Residential/Commercial Journeyman Electrician
Pro Electric
10.2005 - 10.2008
Completed rough-in, termination, and underground work.
Read technical drawings, diagrams and project documentation to make accurate decisions about electrical system installations and repair work.
Trained junior electrical professionals on proper procedures.
Interpreted blueprints, schematics, and diagrams of project requirements and initiated appropriate electrical installations.
Repaired and installed new fixtures, wiring, circuits, and motors.
Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment, and handling of materials.
Performed troubleshooting to determine issues and appropriate action to complete tasks and provide quality installations.
Diagnosed issues and developed effective solutions.
Tested electrical systems and components for continuity, current, voltage and resistance.
Evaluated existing electrical systems for maintenance, repair, and update requirements.
Verified problems, investigated faults, and troubleshot solutions to enhance installations.
Assisted in design and installation of electrical systems and components.
Operated tools according to prescribed safety practices.
Interpreted electrical codes and diagrams to complete electrical repair and installation tasks.
Troubleshooted systems and repaired equipment, ensuring compliance with all established guidelines.
Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
Troubleshot and repaired malfunctioning systems and components.
Connected wires to circuit breakers, transformers or other components.
Replaced and repaired lighting fixtures and electrical control and distribution equipment.
Spliced, joined and connected wire to fixtures and other electrical components.
Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
Followed state and local building regulations based on National Electrical Code.
Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
Installed ground leads and connected power cables to equipment.
Examined electrical units for loose connections and broken insulation.
Studied building schematics to determine location of wiring and equipment.
Installed 120/240-208. 480/277 volt systems
Instructed customers on proper use and safety of electrical systems and equipment.
Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
Managed business report generation, recordkeeping and supply ordering.
Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
New Construction/Service Electrician
Rayco Electric
09.1995 - 10.2005
Worked in houses and small commercial venues to install electrical systems.
Troubleshooted electrical system errors with blueprint readings and modern computer programs.
Correctly connected wires to receptacles by installing professional wiring systems and working closely with construction team.
Maintained underground conduits and circuit wirings by troubleshooting and fixing problems.
Specialized in wiring custom homes by working with onsite job supers.
Designed blueprints and prepped job sites for installation of cables and wiring.
Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
Connected wires to circuit breakers, transformers or other components.
Replaced and repaired lighting fixtures and electrical control and distribution equipment.
Spliced, joined and connected wire to fixtures and other electrical components.
Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
Followed state and local building regulations based on National Electrical Code.
Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters.
Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
Examined electrical units for loose connections and broken insulation.
Installed ground leads and connected power cables to equipment.
Studied building schematics to determine location of wiring and equipment.
Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
Education
High School Diploma -
Honaker High School
Honaker, VA
Skills
Computer Literacy
Installation and Repair
Electrical Maintenance and Repair
Schematic Interpretation
Training Junior Team Members
Onsite Support
Customer Needs Assessments
National Electric Code Understanding
Troubleshooting Expertise
Electrical Installations
Social Perceptiveness
Diagnosis and Troubleshooting
Licensed Electrician
Hobbies and Interest
I have a close family that we spend many weekends together either boating, cookouts or fishing. I enjoy cooking for everyone using the smoker, blackstone and gas grill.
Timeline
Electrical Maintenance Technician
Leisure Pools
09.2019 - 10.2023
Lead Field Service Technician
Campbell's Pool & Spa
10.2008 - 09.2019
Residential/Commercial Journeyman Electrician
Pro Electric
10.2005 - 10.2008
New Construction/Service Electrician
Rayco Electric
09.1995 - 10.2005
High School Diploma -
Honaker High School
Similar Profiles
Byron AndersonByron Anderson
Pool Cleaning and Maintenance at Leisure PoolsPool Cleaning and Maintenance at Leisure Pools