Timothy Wilson

• Clamped and tack-welded components to achieve desired configurations.
• Welded in flat, horizontal, vertical and overhead positions.
• Used MIG gun arc to melt and deposit metal from electrode to workpieces.
• Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts.
• Removed gauges, dents and damaged sections of components and panels, using ding blocks and hammers.
• Chipped and grinded off excess slag, weld and spatter, using power chippers, portable grinders and hand scrapers.
• Reinforced walls and structures while teaming with electricians and plumbers for routing of electrical, water and sewage lines.
• Placed and fastened iron rods and steel mesh together using wire and spot welds.

Welded various types of connections using [Tool] to complete tasks on-time and with high-quality final results

• Used arc, gas-shielded arc, submerged arc and gas welding equipment to weld [Type] parts safely and efficiently
• Clamped, held, tack-welded, heat-bent, ground and bolted component parts to achieve required configurations and positions
• Repaired non-functioning meters and tested to verify operational status.
• Checked accuracy of meters against previous data and kept detailed reports of inconsistencies.
• Monitored daily routes for safety and efficiency to over [Number] properties.
• Maintained personal and equipment safety for over [Number] days in changing weather conditions.
• Monitored collection data to collect over $[Amount] in past-due bills.

• Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc and shielded metal arc equipment.
• Salvaged and rebuilt parts to achieve cost savings and reduce waste.
• Interpreted verbal and written instructions from work orders and welding blueprints.
• Used MIG gun arc to melt and deposit metal from electrode to workpieces.
• Inspected welds and checked critical measurements to meet specifications.
• Welded parts using arc, gas-shielded arc, submerged arc and gas equipment.

• Performed quality finishes by trimming and deburring to create smooth surfaces and joints of assembled parts
• Measured parts using calipers, gauges and micrometers to confirm adherence to quality standards on final inspections
• Fastened joints and seams together to assemble components into sheet metal products
• Managed quality assurance program, including on-site evaluations, internal audits and customer surveys
• Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc and shielded metal arc equipment.
• Used MIG gun arc to melt and deposit metal from electrode to workpieces.

• Used rulers, squares and scribes to measure and mark dimensions and reference lines on materials
• Performed quality finishes by trimming and deburring to create smooth surfaces and joints of assembled parts
• Observed safety practices and procedures to maintain safe and clean working environment
• Measured parts using calipers, gauges and micrometers to confirm adherence to quality standards on final inspections

• Operated robotic cells machinery
• Blew out machines, checked welding leads and wiring and changed filters for preventative maintenance
• Removed rough spots from work pieces with portable grinders, hand files and scrapers
• Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines
• Salvaged and rebuilt parts whenever possible
• Welded in flat, horizontal, vertical and overhead positions
• Assembled structural forms such as boiler parts and pressure vessels
• Used MIG gun arc to melt and deposit metal from electrode to workpieces
• Interpreted verbal and written instructions from work orders and welding blue prints

• Welded various types of connections using tool to complete tasks on-time and with high-quality final results
• Prepared [Type] welding equipment to perform advanced [Area of expertise] work
• Used arc, gas-shielded arc, submerged arc and gas welding equipment to weld [Type] parts safely and efficiently
• Worked on [Type] products, producing [Number] parts per [Timeframe]
• Diagnosed and performed repairs for [Type] and [Type] components
• Clamped, held, tack-welded, heat-bent, ground and bolted component parts to achieve required configurations and positions
• Clamped and tack-welded components to achieve desired configurations

• Removed rough spots from work pieces with portable grinders, hand files and scrapers.
• Used MIG gun arc to melt and deposit metal from electrode to workpieces.
• Assembled structural forms such as boiler parts and pressure vessels.
• Chipped off excess weld, slag, and spatter using hand tools.

• Minimized warping by using good fitting, burning and welding techniques.
• Removed excess slag with arc-cutting, grinding and other equipment.
• Worked correctly with each material such as steel or aluminum.
• Tested welding and safety equipment to check performance.
• Kept work area clean and organized.
• Used MIG and TIG welding on structural supports.

• Operated robotic cells machinery.
• Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts.
• Bolted, clamped and tack-welded parts to secure components prior to welding.
• Set up and operated hand and power tools, including shielded metal arc and gas metal arc welding equipment.

• Clamped, held, tack-welded, heat-bent, ground and bolted component parts to achieve required configurations and positions.
• Effectively managed repair and maintenance scheduled to increase shop organization and equipment longevity.
• Welded various types of connections using [Tool] to complete tasks on-time and with high-quality final results.
• Blew out machines, checked welding leads and wiring and changed filters for preventative maintenance.
• Skilled with gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding and submerged arc welding.

• Selected gauges and types of sheet metal or non-metallic material to meet product specifications.
• Measured parts using calipers, gauges and micrometers to confirm adherence to quality standards on final inspections.
• Observed safety practices and procedures to maintain safe and clean working environment.
• Worked with twisted and damaged metal items to restore appearance by correcting damages.
• Drilled and punched holes in metal for screws, bolts, and rivets quickly and efficiently.

• Maintained correct arc length and movement speed to form specified fusion depth and bead.
• Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts.
• Operated hoists, cranes and power tools to dismantle equipment to find and remove defective parts.
• Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
• Assembled structural forms such as boiler parts and pressure vessels.
• Bolted, clamped and tack-welded parts to secure components prior to welding.