Todd Ditmar
Canyon Lake,Texas
Summary
Diligent and experienced carpenter with 15+ years of experience in construction, carpentry, and project management. Proficient in various skills, including computer networking, door hanging, and heavy equipment operation. Possess a strong commitment to quality and customer satisfaction.
Skilled Trim Carpenter with talents in job site monitoring, cabinet installation and interior trim. Pursuing a similar position where a well-qualified individual is highly sought. I have been constantly employed since 1992, trimming residential custom homes all over the Austin, San Antonio, Canyon Lake Area. I'm an expert with power tools an am a very good communicator. I own a home in the Canyon Lake area and am looking for a change just because I know I can make a difference and do a great job. I do have some experience in insurance adjusting in Port Aransas, as I helped a friend adjust using xactimate, Then I would bid on some of the work, get it and stay busy that way. I was Superintendent for Riedel Custom Homes for 5 years, and I also did all the trim work, ran the warranty division, and was put in charge of all the stuff that goes on in the last minute to finish the house with all trades involved.
Overview
41
41
years of professional experience
1
1
Certificate
Work History
Trim Carpenter
Jeff Chafin, River Hills, Creative Homes
08.2016 - Current
- I was Trim manager of my own company on up to 70 houses a year, I always wore my bags and worked hard everyday
- I'm very detailed oriented, and know what I'm looking at when it comes to any facet in the residential home
- I've been very busy trimming houses for the last 33 years, and had a couple of my builders retire here recently, was just looking at doing something a little different, using my experiences in a little change
- Followed strict adherence to safety protocols from job start to final clean up to prevent accidents and mishaps.
- Dismantled and demolished areas prior to repairs and installment of new materials.
- Built shelves, doors, windows and counters to correct scale and dimensions according to blueprints and building plans.
- Used power tools and hand tools to install fixtures, floorings, trim and hardware, cutting materials to specified measurements.
- Studied specifications in blueprints, sketches or building plan to prepare project layout and determine dimensions and materials required.
- Collaborated with other carpenters, journeymen and supervisors to complete projects.
- Prepared cost estimates for contractors and customers, staying within requested budgets.
- Studied specifications in building plans to determine dimensions and materials required.
- Effectively used nails, screws, pneumatic nailing systems, concrete anchors, powder-actuated fasteners and framing connectors.
- Built and hung custom doors and frames.
- Assembled and installed furniture and cabinetry.
- Calculated dimensions and amount of needed materials by accurately measuring job site and structures.
- Read and interpreted blueprints and construction documents to determine project directives.
- Measured, cut and installed drywall, paneling and other materials.
- Installed drywall, ceilings, trim and fabricated replacement trim and moldings.
- Installed insulation, trim and other finishing touches.
- Inspected buildings to identify repair needs.
- Repaired damaged doors, windows and other structures.
- Cut and shaped materials to meet outlined measurements.
- Managed inventory of tools, supplies and equipment.
- Safely operated electric cordless and hammer drills and cutting torches.
- Measured and marked cutting lines on materials using pencil or chalk and marking gauge.
- Shaped or cut materials to specified measurements using hand tools, machines and power saws.
- Followed protocols and stayed organized to provide personal and teammate safety.
- Facilitated harmonious working relationships with crew members to prevent problems and conflicts.
- Operated forklifts and other heavy equipment.
- Installed cabinets and doors and hauled away all waste, disposing of it properly
- Observed safety rules and procedures to prevent mishaps and injuries on job.
- Scheduled delivery of materials, parts and equipment to job sites.
Trim Subcontractor
Various Custom Home Builders
01.1992 - 08.2016
- Monitored OSHA compliance standards at job site.
- Worked closely with homeowners to ascertain specifics of project.
- Managed on-site property inspections and worked to resolve issues.
- Tracked attendance and submitted work logs every day.
- Supervised additional subcontractors and craftsmen.
- Worked closely with general contractor on completion of punch list tasks.
- Coordinated final walk throughs of job site before signing off on completion.
- Maintained database systems to track and analyze operational data.
- Optimized customer experience by delivering superior services and effectively troubleshooting issues.
- Conducted regular reviews of operations and identified areas for improvement.
- Developed effective improvement plans in alignment with goals and specifications.
- Supported creation of detailed, technical financial models to value potential acquisition targets.
- Gathered, organized and input information into digital database.
- Evaluated customer needs and feedback to drive product and service improvements.
- Devised and implemented processes and procedures to streamline operations.
- Maintained overall safe work environment with employee training programs and enforcement of safety procedures.
- Created and managed project plans, timelines and budgets.
- Observed packing operations to verify conformance to specifications.
- Cultivated positive relationships with vendors to deliver timely and cost-effective supply of services and materials.
- Evaluated staff performance and provided coaching to address inefficiencies.
- Educated staff on organizational mission and goals to help employees achieve success.
- Frequently inspected production area to verify proper equipment operation.
- Delivered high level of service to all customers and effectively resolved issues.
Extrusion Welder for Plastic, Test for Leaks
Gundle Plastics
02.1989 - 12.1991
- Inspected welds and checked critical measurements to meet specifications.
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Prepared welding equipment to perform advanced welding work.
- Welded in flat, horizontal, vertical, and overhead positions.
- Utilized blueprints and diagrams to compare finished products against design specifications.
- Salvaged and rebuilt parts to achieve cost savings and reduce waste.
- Avoided warping, shrinkage, and distortion by carefully controlling welding processes.
- Inspected pieces for defects, measured, and checked with straightedges or templates for compliance with specifications.
- Welded various connections with high-quality final results.
- Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
- Detected faulty operation of equipment and defective materials and promptly resolved issues.
- Maintained safety by wearing protective equipment, staying alert and following procedures.
- Inspected parts and components for defects in soldering process.
- Inspected welds for accuracy and conformance to specifications.
- Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.
- Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
- Bolted, clamped and tack-welded parts to secure components prior to welding.
Driver and Pizza Maker
Dominoes Pizza
10.1986 - 01.1989
- Coordinated efficient routes to avoid delays and optimize schedules.
- Delivered goods and products to customer on time and in excellent condition.
- Completed routine pre- and post-trip inspections to evaluate vehicles and assess maintenance needs.
- Followed proper safety procedures and protocols while loading, unloading and operating vehicles.
- Followed all relevant traffic laws and safety regulations.
- Maintained professional and friendly demeanor during deliveries to uphold company reputation.
- Loaded and secured items in trucks to avoid damage to parcels during delivery.
- Operated pizza oven and other kitchen equipment safely to protect team members from harm and equipment from damage.
- Used pizza cutter to slice pizzas according to size and customer specifications.
- Coached new workers on store policies, pizza making, and dough preparation.
- Prepared raw materials for cooking by cutting vegetables and preparing dough.
- Cleaned and sanitized work areas, utensils and equipment.
- Restocked inventory and ingredient items to maintain optimal kitchen efficiency.
- Received and stored food supplies, raw materials and other ingredients.
Radio Teletype Operator, 31c
United States Army
08.1984 - 08.1986
- We worked as a team and I worked as a supply technician for hawk missile systems, Along with running the radio teletype. If they needed parts, they came to me
Education
High School Diploma - General High School Studies
Clear Lake High School
Houston, TX05-1984
Skills
- Computer Networking
- Door Hanging
- Backhoe Operation
- Handyman
- Mechanical Knowledge
- Trim Carpentry
- Heavy Equipment Operation
- Frame Carpentry
- Xactimate
- Plumbing
- Carpentry
- Welding
- Mantle building
- Power tool operation
- Remodeling
- Hand tool mastery
- Construction Management
- Cabinet installation
- Project Management
- Setting doors
- Layout planning
- Client communication
- Hardware installation
- High level millwork
- Superb time management
- Upselling
- Sales trends
- Contract preparation
- Problem-solving
Certification
OSHA 10
Additional Information
I've been very busy trimming houses for the last 33 years, and had a couple of my builders retire here recently, was just looking at doing something a little different, using my experiences in a little change. Back in 2017 I helped a friend of mine do some insurance adjusting and would be interested in looking into that field of expertise. I'm not unfamiliar with Xactimate as I was putting together losses and using the system as a helper. I have a nice mobile office in a travel trailer with a generator to go out in the field and do some adjusting if need be. Ready to go.
Timeline
Trim Carpenter
Jeff Chafin, River Hills, Creative Homes
08.2016 - Current
Trim Subcontractor
Various Custom Home Builders
01.1992 - 08.2016
Extrusion Welder for Plastic, Test for Leaks
Gundle Plastics
02.1989 - 12.1991
Driver and Pizza Maker
Dominoes Pizza
10.1986 - 01.1989
Radio Teletype Operator, 31c
United States Army
08.1984 - 08.1986
High School Diploma - General High School Studies
Clear Lake High School
Military Service
United States Army, United States, E-3, 08/01/84, 08/01/86, We worked as a team and I worked as a supply technician for hawk missile systems, if they needed parts, they came to me. I was stationed at the Depot in Giessen, Germany.
Similar Profiles
Amy HershmanAmy Hershman
Design Center Manager/Keyholder at Jeff Lee Special Agent HomesDesign Center Manager/Keyholder at Jeff Lee Special Agent Homes
Robert CarruthersRobert Carruthers
Assistant Builder at Jeff Benton HomesAssistant Builder at Jeff Benton Homes
MARION LYLES-LEWISMARION LYLES-LEWIS
Psychiatric Mental Health Nurse Practitioner at River River Region Psychiatry Associates HCA contract -Southern Hills, Pinewood Springs, Parthenon PavilionPsychiatric Mental Health Nurse Practitioner at River River Region Psychiatry Associates HCA contract -Southern Hills, Pinewood Springs, Parthenon Pavilion