Toussaint Crider

A Solid Good Work with a positive attitude and a commitment to safety, quality, customer service in Lean Manufacturing. My personality and work ethic make me a perfect team member whose Goal is quality in Industrial Pace. Hard working, strong and physically agile Manufacturing Professional who excels at any Job Task.

• Welding DS1-TIG/6G Pipe-(Titanium, Inconel, Stainless Steel and Aluminum), Strom Engineering, Seattle, WA, 2025-11-25, 2026-01-01, Aerospace Welding Precision TIG (GTAW) Thin-Wall Welding using Aluminum/ Stainless Steel/ Inconel/Titanium/ Basically its Close-Tolerance Weldings.
• Machine Press Operator, Afimac Global/Novolex Plastic, North Vernon, IN, 2025-08-25, 2025-10-01, We make all types of various Plastic Bags using all types of Set-ups, Once I get the Recipe to what's needed to be. Get the Boxes ready, Get the Paint that's needed, put the Roles on that's needed and Connect them with Tape so they can Proceed to come through the Lines. Run the Lines to see if the Names and Logos come out Perfectly on the Bags.
• Produce, Afimac Global/King Supa, Denver, CO, 2025-05-25, 2025-08-01, I also Stocked and Rotated produce to ensure freshness and quality, organized displays and monitored inventory Levels while assisting Customers with product selection inquiries.
• Welding DS1-TIG, MIG and SMAW, Huffmasters/Star Precision, Longmont, CO, 2025-05-01, 2025-05-31, We are putting together the Frames to the Big Generators that's behind the Hospitals. Using certain processes involves establishing standardized, repeatable and Documented tasks consistently aiming to improve efficiency, reduce errors and save Cognitive Energy.
• Produce, Afimac Global/King Supa, Denver, CO, 2025-03-01, 2025-04-30, I Stocked and rotated produce to ensure freshness and quality, organized displays and monitored inventory Levels. Assisted Customers with product selection and inquiries.
• Slip Sheet Forklift, Afimac Global/Nestle Purina, AllenTown, PA, 2024-09-01, 2024-11-30, First and Foremost I Started Checking my Slip Sheet Forklift for Leaks and Tire Damages Etc. Then I sign in to my Ipad and prepare to get started also with my Ordering Selecting. Pre-Extending my Forks getting ready for my Slip Sheet Pulling after I have made my Count to how much is needed for all of the Orders that's all supposed to go on the Pallet before Wrapping with plastic and adding The Stickers on it about the order.
• Welder Fabricator/Overhead Crane/Assembly, Afimac Global/Wabtec Corporation, Erie, PA, 2024-07-01, 2024-09-30, My Job was to Assemble and Fabricate Locomotive Trains from the Beginning. We established this using the Locomotive Production Lines specializing in Diesel-Electric and more recently. Battery-Powered Locomotive.
• Flux Core Welder, J.F. Menzia & Sons, Rock Spring, WY, 2024-04-01, 2024-07-31, We had to fix a Gigantic Dryer that was At Least 5 Stories up in the air with a lot of Cutting, Grinding, Gouging, Fabricating with A Lot of Welding to replace a whole lot of Parts. We worked for 2 Shifts for 12 hrs Non stop until the Job was Completed.
• Production Warehouse, Afimac Global/AGRI-MARK, St Johnsbury, VT, 2023-12-01, 2024-03-31, We are Putting Cheese of all Sizes on the Line to get ready for to be Cut & Sliced of all Different Kinds to be Packaged and to be put in Boxes. With the right Stickers on it and into the Right Boxes getting ready for Transport Etc……
• Mig Welder/Production Warehouse, Afimac Global/Caterpillar, Minneapolis, MN, 2023-09-01, 2023-12-31, I Welded and Fabricated Parts that were supposed to be used, following the BluePrint to Complete the Job Tasks Period.
• Lineman/Welding/Overhead Crane/Production/Fabricating Warehouse, Afimac-Global/Wabtec Trains Corporations, Erie, PA, 2023-06-01, 2023-09-30, I was a Lineman doing a whole lot of different things during this Task, from assembling things, going down the Line, Picking up Heavy Parts with overhead Crane moving things down the line, and setting up too……sometimes using the Forklift, to Welding Components etc. I was asked to multitask a lot during this job.
• Mig Pipe Welder/Production Warehouse/Forklift/Hoist, Strom Engineering/Timken Drives, Clinton, IA, 2022-03-01, 2023-05-31, Welding your Flighting to your Augur can be tricky and there is always a risk of your Augur not performing properly if done incorrectly. There are tips and tricks to help ensure a straight, tight fit. I've Trained all their new Employees from Welding all the Pipe and Ends Etc.
• Reclaim Welder/Overhead Crane/Production, Strom Engineering/John Deere Corp, Davenport, IA, 2021-09-01, 2021-11-30, My Job assignment is to Fix Weld Job. Sometimes I have to Galvanize out the whole Welds if it is that Bad, even grind out and remove all of Paint too, if it is in the way for me to Complete my Job assignment. I use different tools and machinery to complete my Task, depending on what needs to be done on all Vehicles.
• Welder Assembly Fabricator/Production Warehouse/Assembly, Strom Engineering/Midwest Industries, Du Plains, IA, 2021-06-01, 2021-09-30, Now this is an all Welding Assembly Fabricator job all I do is to read the BluePrints and Check out the Materials to see if it is the right Parts by the numbers and all and get what is needed to do the job and Assemble it then Weld it all together Etc.
• Welder Mig and Tig Fabricator Parts all on Aluminum/Production/Warehouse, Strom Engineering/Brunswick Boats, Fort Wayne, IN, 2021-04-01, 2021-06-30, Now my Job at this Brunswick was to Weld on the Motor Pods and the Wing Tales on Both sides on the Platoon Boats Etc.
• Welder Mig and Tig Fabricator Parts all on Aluminum/Production/Warehouse Fabricator, Strom Engineering/Brunswick Boats, Lebanon, MO, 2020-11-01, 2021-03-31, My Job is to Fabricate all Boat Parts that are needed from the Front Nose, Back End of it, Both Sides of it and the Motor Back Plate Etc.
• Automotive Technician/Welder Mig, Assemble Parts/Production Warehouse/Forklift, Strom Engineering/Polaris Vehicles, Unknown, Unknown, 2020-08-01, 2020-11-30, My Job was to look at the things that 2nd shift didn't complete as well as Welding finishing them. Then prepare for the next Job assignment plus going to get the materials, take the finished racks to their next operation place and bring the Empty racks down and start on the next Project.
• Machine Press Operator, Production Food Curer, Packaging Etc., Strom Engineering/Krispy Kreme, Burlington, IA, 2020-04-01, 2020-08-31, My job was to make sure all the Donut holes get into the packaging without them sticking together and with the packaging not being opened, and making sure that the Donut whole pieces do not make it into the Packaging or with the Product not being together.
• Automotive Technician/Machine Press Operator, Forklift, Welding-Plasma, Overhead Crane, Steel Thrower, Tool & Die, Forklift, Tug Puller Etc., Strom Engineering/Toyota Plant, Jamestown, IN, 2019-08-01, 2020-03-31, My Job was to do what is needed at that time whether it's to complete pressing the Material that was already working on, or Change the Tool & Dies. Or Start Changing everything out and Start getting the Materials for the Next Recipe.
• Welder-Mig & Tig, Production Finisher, Pemming, Spot Welder, Grinder and Assembly Etc., Strom Engineering/Maysteel Industries, Allenton, WI, 2019-02-01, 2019-07-31, Multi-Tasked Always, My job is to do what is needed that Day whether it's Pemming, Finishing, Grinding, Aluminum Welding, Mig or Tig Etc.
• Welder/Assembly/Warehouse Production, Resource MFG Temp Service/ Wabash National, Lafayette, IN, 2018-11-01, 2019-02-28, My Job was to Assemble and put on Lift Gates on the Trailer or the Battery Boxes. Whether it's using the Method Assembly, Grinding, Cutting or Welding.
• Welder/Parts Production Fabricator/Warehouse Production, Strom Engineering/SA-Holland, Dumas, AR, 2018-01-01, 2018-11-30, Responsible for setting up and operating welding equipment, check sizes and welds, with no defects. If others have defects that I am responsible to help fix or fix it, myself using my removable Gouging Rods and Grinding as well as putting good welds, Using 0.45 hard wire.
• Welder/Frames Fabricator Warehouse/Forklift, Strom Engineering/Case2, Benton, MN, 2017-05-01, 2017-12-31, Read the Blueprint first to see what kind of Frame I am building/ assemble it, tack it- so that it holds together. Then weld the frames using 0.52 hard wire.
• Bumper and Food Curer, Allied Alliance Inc./ Kraft, Davenport, IA, 2016-05-01, 2017-03-31, First I see the Recipe to see what Meat is needed to Prepare it, I weight it all then start Bumping it, Meaning Tenderizing the Meat. Then I get all of the Seasonings that are needed for the Job and prepare it to go in the Tumbler to get all Mixed Together. Then put in Steel Metal Vacs and then to get Weighed. Then go on to the next Destination.
• Food Picker, Packer, Stacker & Forklift, Huffmasters-Nabisco, Cincinnati, OH, 2016-05-01, 2016-10-31, My job was to pick out and get everything that is needed for the Order, and make sure that it is all there. Then stack it all on the Crates then wrap it all up, for Shipping and put it all on the Semi-Trailer, to be Shipped.
• Welder/Truck Cell/Front,Back, Sides,Floor Etc……, Freight Car Inc, Danville, IL, 2011-06-01, 2016-03-31, I was asked a lot of Times to Muti-Task since I already had known a lot of Positions which needed help or was short of People. We had Builded a lot of Brand New Coal Aluminum Trains or Fixed the ones that had come in for Repairs.
• Welder/Finishing and Component Tech, Bumper Works, Danville, IL, 2006-04-01, 2011-05-31, I was asked to Multi-Task a lot because I already knew a whole lot of different Positions out of all the Accumulated Time that I was Working there. I was Assembly Welding, Surface Prep, Applying Coating, Quality, Machine Press Operating Etc……