Travis Thompson

•Assembles and disassembles, erects and repairs boilers, tanks, vats, pressure vessels, exchangers and

Executed installation of heaters in strict accordance with blueprint specifications.

• Assembled and installed boilers, tanks and vats according to blueprints and specifications.
• Fabricated and assembled pressure vessels, ensuring compliance with industry specifications and safety regulations.
• Interpreted blueprints and technical drawings to execute precise metalworking tasks.
• Streamlined workflow processes, improving efficiency in material handling and assembly operations.
• Collaborated with engineering teams to resolve design challenges during fabrication stages.
• Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.
• Maintained compliance with all safety procedures from both client and employer.
• Tightened or replaced bolts and gaskets to repair leaks.
• Inspected equipment and structures to determine scope of work (SOW).
• Built and repaired process tanks, storage tanks and water treatment tanks.
• Used hand signals to notify crane operator to lift components to specific positions.
• Interpreted blueprints, sketches, and specifications for each job.
• Identified issues and addressed each immediately with job foreman.
• Dismantled equipment or devices to gain access and remove defective parts or components.
• Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.
• Inspected equipment, structures and materials to identify cause of errors.
• Upheld company reputation for excellence by consistently delivering high-quality workmanship that met or exceeded client expectations.
• Coordinated movement of materials and equipment to job sites.
• Ensured compliance with industry regulations through diligent adherence to codes and guidelines in all tasks performed.
• Cleaned and maintained boilers and associated equipment to increase efficiency and performance level.
• Increased workplace safety by conducting thorough inspections of boiler systems and components.
• Removed boiler casings, grades, handrails, manhole, and hole covers to facilitate access to boilers or other vessels for repair.

• Knowledge of and adherence to all Safety and Environmental processes and procedures.

• Maximizing production with minimal delays, and ensuring optimum product quality.

• Perform minor maintenance/modificationsto achieve correct operation.

• Make decisions to achieve safe/effective operation.

• Keep written and/or electronic documentation of process data. Enter data into spreadsheets and data bases that are

provided.

• Provide a shift summary at the end of each shift.

• Follow all area instructions.

• Monitoring and maintaining day-to-day unit operations

• Conducting daily minor maintenance repairs

• Conducting HRP/JSA/Safe Work Permitting pertaining to unit operations

• Applying statistical tools to enhance product quality and participating on improvement teams

• Conducting operations communications in and out of the department with peers, managers and customers

• Assisting with the training of new employees, as required

• Startup, shutdown, isolation and decontamination of plant equipment adhering to plant policies and procedures.

• Understanding and complying with administrative duties for government regulations from federal and state agencies

• Participating on improvement teams when needed.

• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Worked with various types of cableways, conduits and other electrical raceways.
• Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment.
• Worked on both dead and energized lines.
• Responded to emergencies and outages that required additional labor and assistance for repairs.
• Observed company safety rules and regulations to minimize workplace accidents and reduce electric shocks.
• Installed and maintained overhead and underground electrical power lines and auxiliary equipment.
• Maintained solid safety record with no OSHA-recordable incidents.
• Worked with High Voltage shop for 1 1/2 years testing, tearing down and replacing breakers replacing fuses
• 
  

• Installed, maintained and repaired electrical wiring, controls and lighting systems.
• Connected wires to circuit breakers, transformers, and other components.
• Repaired and replaced equipment, electrical wiring and fixtures.
• Attached power cables to equipment such as electric range and motor.
• Assessed electrical systems, equipment and components to identify hazards, defects and needed adjustments or repairs.
• Traveled to different plants in other cities and states working shut downs

• Inspected ship components and mechanisms for compliance with safety, operability and regulatory standards.
• Monitored inventory, budgeted supply use and ordered supplies to keep ship sufficiently stocked.
• Extraction boats from molds
• Plumbed boat hulls
• Fiberglass/Gel coat work
• Installed all electronics to boat consoles
• Worked flexible hours; night, weekend, and holiday shifts.
• Performed duties in accordance with applicable standards, policies and regulatory guidelines to promote safe working environment.
• Carried out day-day-day duties accurately and efficiently.
• Quickly learned new skills and applied them to daily tasks, improving efficiency and productivity.

• Prepped trimming tools by sharpening shears, grinders and saw teeth.
• Trimmed greenery, shrubs and hedges to maintain uniform appearance.
• Organized materials, tools and equipment to supply team members.
• Used shears, pruners and chainsaws to prune and trim hedges and shrubs.
• Limbed and pruned variety of tree species.
• Removed dead and excess branches from trees.
• Chopped and trimmed trees and operated chipping equipment for limbs.
• Operated shredding and chipping equipment and fed limbs and brush into machines.
• Operated/drove bucket truck to perform Trimming/Removal of trees

• Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge.
• Helped complete system installations, digging trenches and breaking up concrete.
• Learned to expertly use hand and power equipment
• Organized materials and tools in to maintain clean and neat work areas.
• Tested electrical systems and continuity of circuits in electrical wiring, equipment and fixtures using various testing devices.
• Pulled wire through conduits and through holes in walls and floors.
• Checked and performed electrical wiring through conduits and holes in walls and floors.
• Assisted electrician in basic tasks such as handling tools and completing maintenance work orders.
• Gathered parts, supplies and tools in preparation for each workday or new job.

• Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge.
• Tested electrical systems and continuity of circuits in electrical wiring, equipment and fixtures using various testing devices.
• Complied with safety standards and codes per National Electrical Code.
• Pulled wire through conduits and through holes in walls and floors.
• Demonstrated knowledge of safety protocols and industry best practices.

• Trimmed greenery, shrubs and hedges to maintain uniform appearance.
• Performed planting, watering, mulching and edging of lawns.
• Handled hedge, bush and shrub trimming.
• Removed weeds, hazards and debris from common pathways to improve usability.
• Maintained routine landscaping schedules to boost lawn health.
• Followed planned landscaping designs to determine placement of sod, sown grass, flowers and foliage.
• Applied mulch to garden beds for protection against weeds and unwanted growth.
• Installed stonework according to landscape design plan and client specifications.
• Operated heavy equipment

• Maintained various types of flower beds by removing spent flowers, pulling weeds and edging.
• Evaluated status of lawn conditions and met directly with customers to create lawn care programs specific to needs and preferences.
• Spread and applied mulch around flower beds to retain moisture in soil and suppress weeds.
• Recommended tips for homeowners to help maintain yards and lawns such as proper mowing techniques, repairing bare spots on lawns and choosing correct seeds and fertilizers.
• Handled hedge, bush and shrub trimming.
• Trimmed greenery, shrubs and hedges to maintain uniform appearance.
• Used trimmers and chainsaws for grounds maintenance, brush clearing and tree removal and thinning.
• Operated skid steers, wheel loaders, forklifts and yard goats.
• Inspected machinery to spot damage and note needed maintenance repairs.
• Followed planned landscaping designs to determine placement of sod, sown grass, flowers and foliage.

• Followed safety precautions to avoid personal injury and provide safe work environment.
• Removed outdoor debris and yard clippings into receptacles to properly maintain grounds.
• Used problem-solving skills to alleviate issues efficiently with minimal supervision.
• Replaced light bulbs in indoor and outdoor fixtures and checked smoke and carbon monoxide detectors for proper functionality.
• Maintained restroom functionality by repairing leaking faucets, clogged toilets and other equipment.
• Installed new locks, door handles and door closers.
• Performed minor wall repair, installed drywall and applied wallpaper.
• Performed plumbing repairs to provide consistent facility upkeep and prevent property damage from water.
• Tested electrical continuity and electrical wiring by using ohmmeter and circuit tester.