Tremon Harper
5027 Club Vista Point Stone Mountian,GA
Summary
Promoted cooperative efforts and developed performance-driven strategies to support company objectives.
Overview
25
25
years of professional experience
1
1
Certification
Work History
Sprinkler Fitter Journeyman
International Fire Protection
Austell, GA
07.2025 - 02.2026
- Completed commercial installations in new and existing construction projects.
- Performed overhead pipe installation tasks working with steel piping systems.
- Fabricated and installed pipes for systems. Worked with blueprints and schematics to lay out pipes and assemble systems.
- Interprets blueprints to determine appropriate procedures as well as locations, quantities, and sizes of materials required for each project.
- Install a variety of valves and fittings. Used power tools and hand tools to modify, repair and maintain existing installations.
- Operate scissor, boom, and forklifts.
- Involved in the layout, rough-in, and installation of sprinkler pipe.
- Helped foreman with coordinating field fabrication of sprinkler pipe.
- Completed full scale drawings of systems based on blueprints.
- Perform work in unusual and sometimes difficult positions; such as climbing ladders, scaffolding, and high lift equipment.
- Selected appropriate pipe sizes then measured and cut them accordingly for fitting.
- Maintain a clean and safe work area.
Fire Sprinkler Inspector
Century Fire Protection
Duluth, GA
11.2023 - 07.2025
- Conduct inspections on all kinds of sprinkler systems such as wet and dry systems, fire pumps and stand pipes.
- Prepare and maintain inspection reports.
- Performed troubleshooting of the sprinkler systems and any malfunctions in it.
- Inspect and check the proper working condition of the fire sprinkler systems, fire pumps and suppression systems.
- Administered inspection of the sprinkler systems and extinguishers to insure they are up to code according to NFPA 25 and NFPA 10.
Sprinkler Fitter Journeyman
North Star Fire Protection
Norcross, GA
09.2020 - 10.2023
- Remarkable experience in installing fire sprinklers.
- Sound knowledge of various dry and wet sprinkler systems.
- Ability to carry heavy load and work from a height.
- Ability to read and interpret various blueprints and diagrams to facilitate the installation process.
- Proficient in working in a team and as an individual.
- Perform work in unusual and sometimes difficult positions; such as climbing ladders, scaffolding, and high lift equipment.
- Operate scissor, snorkel, boom, and forklifts.
- Perform installation, service, repair, and day work of fire sprinkler systems of all types.
- Maintain a clean and safe work area.
- Pick up and properly dispose of all debris associated with work.
- Responsible for assuring all tools and equipment are properly secured at the end of each work period so as to prevent damage or loss.
Sprinkler Fitter
National construction workforce
Indianapolis, IN
03.2019 - 09.2020
- Completed commercial installations in new and existing construction projects.
- Performed overhead pipe installation tasks working with steel piping systems.
- Fabricated and installed pipes for systems. Worked with blueprints and schematics to lay out pipes and assemble systems.
- Interprets blueprints to determine appropriate procedures as well as locations, quantities, and sizes of materials required for each project.
- Install a variety of valves and fittings. Used power tools and hand tools to modify, repair and maintain existing installations.
- Operate scissor, boom, and forklifts.
- Involved in the layout, rough-in, and installation of sprinkler pipe.
- Helped foreman with coordinating field fabrication of sprinkler pipe.
- Completed full scale drawings of systems based on blueprints.
- Perform work in unusual and sometimes difficult positions; such as climbing ladders, scaffolding, and high lift equipment.
- Selected appropriate pipe sizes then measured and cut them accordingly for fitting.
- Maintain a clean and safe work area.
Sprinkler Fitter Foreman
IMP MECHANICAL
Fayetteville, GA
05.2013 - 03.2019
- Install and maintain fire protection systems in accordance with, NFPA 13 standards.
- Blue print reading and modifications to systems to ensure systems are installed in accordance with all NFPA guidelines pertaining to fire protection systems.
- Installed and supervised the installation, service and repair of wet and dry systems.
- Ensured work was done safely in accordance with OSHA 10 standards, managed company safety meetings and training.
- Perform work in unusual and sometimes difficult positions; such as climbing ladders, scaffolding, and high lift equipment.
- Completed both residential and commercial installations in existing buildings as well as in new construction projects.
- Performed overhead pipe installation tasks working with steel piping systems and cpvc.
- Fabricated and installed pipes for systems.
- Worked with blueprints and schematics to lay out pipes and assemble systems.
- Interprets blueprints to determine appropriate locations, quantities, and sizes of materials required for each project.
- Worked in close communication with home and business clients throughout the installation process to ensure their needs were met.
- Install a variety of valves and fittings.
- Used power tools and hand tools to modify, repair and maintain existing installations.
- Completed full scale drawings of systems based on blueprints.
- Selected appropriate pipe sizes then measured and cut them accordingly for fitting.
- Operate scissor, snorkel, boom, and forklifts.
- Maintain a clean and safe work area.
Automotive Tech
Cascade Auto Repair
Atlanta, GA
04.2008 - 05.2013
- Weld tail pipes and mufflers using smaw welding process.
- Weld catalytic converters and automotive frames, and trailer hitches.
- Clean workpieces to remove impurities, such as rust and slag using wire brush, chipping hammer, chisel, and portable grinder.
- Perform routine maintenance on all vehicles ie, oil changes, fluid checks, filter replacement, tire rotations and changes, and replace brake pads and rotors.
- Perform computer diagnostics test on vehicles and assist in major repairs.
- Great customer service skills, answer the phone, greet and assist customers with concerns.
- Responsible for ordering parts and stocking shelves with inventory.
- Responsible for keeping work area clean and free of debris and oil.
Line Cook
Gladys Knights Chicken and Waffles
Atlanta, GA
03.2005 - 04.2008
- Prepare all food items in a timely and hygienic manner.
- Stored food items and maintained the highest levels of sanitation and cleanliness.
- Operated the fryer and cooked meats on the grill.
- Became safe serve certified.
Mess Management Specialist
U.S. Navy
Norfolk, VA
02.2001 - 03.2005
- Learn the fundamentals of mess management.
- Learn food preparation and safety standards.
- Clean, cut, and cook meat, fish or poultry.
- Clean and inspect galley equipment, kitchen appliances, and work areas to insure cleanliness and functional operation.
- Cook food according to menus.
Education
Aerial Training - Aerial Lift Safety
SafetyHaead’s Mobile Elevating Working Platforms
01.2026
High School Diploma -
Aviation Institute of Maintenance
Duluth, GA11.2009
Backflow Prevention Tester Certification - Fire Protection
University of Florida
Gainesville, Florida, FL03.2024
GED -
Lenoir Community College
Kinston, NC07.1999
Skills
Executed commercial and residential fire protection installations in both existing structures and new construction projects
Executed overhead pipe installation tasks utilizing steel and CPVC piping systems
Engineered and installed piping systems to ensure operational efficiency
Executed layout of pipes and assembly of systems using blueprints and schematics
Operated power and hand tools to modify, repair, and maintain existing installations
Executed comprehensive installation of systems in accordance with blueprints
Determined optimal pipe sizes and executed precise measurements and cuts for seamless fitting
Conducted thorough inspections of fire sprinkler systems to ensure compliance with safety regulations
Demonstrated expertise in diverse fire suppression systems
Interpreted and analyzed blueprints and diagrams to ensure accurate project execution
Executed verbal and written instructions with precision and attention to detail
Demonstrated expertise in written and verbal communication skills
Executed welding preparation for two AWS-sanctioned qualifications in accordance with Code of Structural Steel D11
Assisted in oxyacetylene cutting and arc welding tasks to support project completion Operated equipment under supervision to ensure safety and quality standards Collaborated with team members to maintain workflow efficiency
Executed shielded metal arc welding (SMAW) techniques to ensure high-quality weld integrity
Assisted in performing gas metal arc welding (GMAW) and gas tungsten arc welding (GTAW) techniques Supported team members in achieving quality welding standards Contributed to maintaining a safe and organized work environment
Executed flux core welding processes to ensure structural integrity and quality standards
Assisted in understanding welding principles and safety protocols Supported training sessions on safe welding practices Helped maintain a safe working environment through adherence to safety guidelines
Interpreted and analyzed welding prints to ensure precise execution of fabrication tasks
Certification
- Combination Welding Graduate
- Aerial Training 2026-01-12 to 2026-01-12 SafetyHead’s Mobile Elevating Work Platforms Training Course Group A,B type 3 MEWP CERTIFICATION
- OSHA FORKLIFT 0.2 IACET CEUS CERTIFICATION
- Inspector 2 for water based fire protection systems certification ACE accredited 2024-05-07
- Backflow prevention tester certification 2024-03-04 to 2024-03-08 Center for Training, Research and Education for Environmental Occupations, University of Florida accredited
Timeline
Sprinkler Fitter Journeyman
International Fire Protection
07.2025 - 02.2026
Fire Sprinkler Inspector
Century Fire Protection
11.2023 - 07.2025
Sprinkler Fitter Journeyman
North Star Fire Protection
09.2020 - 10.2023
Sprinkler Fitter
National construction workforce
03.2019 - 09.2020
Sprinkler Fitter Foreman
IMP MECHANICAL
05.2013 - 03.2019
Automotive Tech
Cascade Auto Repair
04.2008 - 05.2013
Line Cook
Gladys Knights Chicken and Waffles
03.2005 - 04.2008
Mess Management Specialist
U.S. Navy
02.2001 - 03.2005
Aerial Training - Aerial Lift Safety
SafetyHaead’s Mobile Elevating Working Platforms
High School Diploma -
Aviation Institute of Maintenance
Backflow Prevention Tester Certification - Fire Protection
University of Florida
GED -
Lenoir Community College