Summary
Overview
Work History
Education
Skills
Timeline
Generic

Trey Cofield

Greenville,NC

Summary

Hands-on machine operator offering several years of experience working in manufacturing settings and operating machinery for production.

Overview

11
11
years of professional experience

Work History

Aircraft Structure Mechanic

Boeing
, SC
11.2023 - Current
  • Made sure the products were produced on time and are of good quality
  • Collated components for Assembly
  • Fabricated large and small parts per drawing and assembled parts as required
  • Maintained the necessary level of communication between shifts
  • Assist machine operators with finished products
  • Performed maintenance on aircraft components such as wings, fuselage, control surfaces and landing gear.
  • Utilized blueprints to locate rivet holes for installation of skins and other components.
  • Verified that all fasteners were installed correctly according to manufacturer's specifications.
  • Installed new structural components including bulkheads, stringers, frames and longerons.
  • Inspected wiring harnesses for signs of wear or damage before installing them into the aircraft frame.
  • Checked for proper fitment of doors, panels and hatches after installation was completed.
  • Aligned parts during assembly process utilizing measuring devices like tape measures, calipers and micrometers.
  • Operated hoists and cranes to lift heavy components into place while assembling the airframe.
  • Updated maintenance and repair logs according to services performed and submitted reports to supervisors for review.
  • Used diagnostics and troubleshooting tools to identify failures and equipment issues.
  • Utilized electronic testing equipment to troubleshoot fuel, ignition and emissions control systems.
  • Reviewed work orders and discussed with supervisors.

Lead Machine Operator

Bridgestone Americas
Wilson, NC
05.2021 - 04.2023
  • Operated tire building machines to build tires according to specifications.
  • Ensured that all safety regulations were followed while working with hazardous materials such as rubber compounds and chemicals.
  • Assisted other technicians with troubleshooting any problems that arose during the tire-building process.
  • Ensured safety procedures were followed when operating forklifts.
  • Monitored the production process to ensure proper operation and quality standards were met.
  • Perform periodic maintenance on machines such as cleaning and lubrication.
  • Record production information such as quantities produced and materials used on daily logs.
  • Ensure that safety guidelines are followed at all times while operating machinery.
  • Monitor the feed and speed of machines during the machining process.
  • Unload finished products from machines onto conveyors or other transport systems.
  • Carry out regular safety checks on machinery prior to operation.
  • Inspect finished workpieces to ensure conformance with specifications.
  • Observe machine operations to detect any problems or defects in the finished product.
  • Transported material to correct locations and documented inventory changes.
  • Maneuvered forklift over and around loaded pallets, boxes and other materials.
  • Loaded and unloaded raw materials into machines for processing into finished products.

Production Operator

West Pharmaceutical Services Inc
Kinston, NC
10.2020 - 05.2021
  • Monitored product quality throughout the mixing process.
  • Followed standard operating procedures while performing duties in a safe manner.
  • Kept detailed logs of all batches produced, noting any variations from established recipes or standards.
  • Recorded batch numbers on labels prior to transferring product from mixer to container and hopper for packaging purposes.
  • Loaded raw materials into mixers as required by production orders.
  • Ensured that all products were mixed according to established recipes and standards.
  • Transferred finished product from mixer to storage containers or hoppers as necessary.
  • Verified production orders prior to starting set-up.
  • Reviewed work specifications to determine product and material requirements.
  • Completed changeovers and wash downs of equipment, changed screens and assembled socks with no unnecessary delays.
  • Measured ingredients for use in production processes.

Assembly Technician

Spirit Aerosystems
Kinston, NC
05.2018 - 05.2020
  • Performed maintenance on aircraft components such as wings, fuselage, control surfaces and landing gear.
  • Utilized blueprints to locate rivet holes for installation of skins and other components.
  • Sanded down rough edges on newly fabricated parts prior to painting or priming them for final assembly.
  • Installed new structural components including bulkheads, stringers, frames and longerons.
  • Verified that all fasteners were installed correctly according to manufacturer's specifications.
  • Operated hoists and cranes to lift heavy components into place while assembling the airframe.
  • Replaced damaged structural parts with new ones using hand tools and power tools.
  • Drilled rivet holes in order to install various components onto the aircraft structure.
  • Fabricated replacement parts when needed according to specifications provided by engineering drawings.
  • Conducted non-destructive testing on materials used in construction of the aircraft structure to ensure quality standards were met.
  • Applied sealants around joints between panels to prevent water leakage into interior of the plane.
  • Installed fittings such as hinges, brackets and clips onto airframes using appropriate tools.

Press Technician

Asmo
Greenville, NC
10.2015 - 01.2018
  • Reviewed job orders to determine set-up procedures for each job.
  • Inspected printed products for compliance with customer requirements.
  • Worked closely with supervisors to ensure timely completion of projects.
  • Utilized overhead cranes to move heavy rolls of paper around the facility.
  • Checked print samples against proof sheets prior to starting a run.
  • Cleaned rollers, cylinders, blankets, and other parts of the machine as necessary.
  • Adjusted and calibrated press settings to ensure accuracy in accordance with specifications.
  • Provided technical support to operators during shifts.
  • Repaired minor damage to plates before installation on presses.
  • Troubleshot mechanical and electrical problems with presses.

Hull Prep

Grady-white boats inc
Greenville, NC
04.2014 - 11.2014
  • Assisted in the installation of additional equipment such as stabilizers, thrusters, and rudders onto vessels.
  • Ensured that all safety regulations were strictly adhered to while working on boats.
  • Measured and cut holes into the vessel's hull for mounting hardware components.
  • Checked all electrical wiring connections on board boats for proper functioning.
  • Performed regular maintenance on a variety of hulls to ensure they remained seaworthy.
  • Installed new propellers, shafts, bearings, and seals according to manufacturer specifications.
  • Inspected and tested hulls for watertight integrity using various instruments.
  • Applied protective coatings to prevent corrosion or other damage from occurring to the hull's surface.
  • Dismantled defective parts of the hull structure in order to make repairs or replace them with new ones.

Boat Builder

Albemarle Boats Inc
Edenton, NC
08.2013 - 03.2014
  • Applied primers, paints, varnishes, and other finishes to boats.
  • Maintained a clean workspace free from debris or hazardous materials.
  • Created molds for fiberglass components from blueprints.
  • Removed old paint or coatings from surfaces with sanders or chemical strippers.
  • Assembled decks and hulls with epoxy resins and fiberglass reinforcements.
  • Fabricated parts using hand tools, power tools, and welding equipment.
  • Performed routine maintenance tasks on machinery used in boatbuilding processes.
  • Ensured that all materials used in construction met the necessary standards.
  • Assessed all mechanisms and components for operability, safety and compliance with relevant regulatory codes.

Education

High School Diploma -

John A. Holmes High School

Associate of Applied Science - Electronic Engineering

Pitt Community College
Winterville, NC

Skills

  • Blueprint Reading
  • Aviation Maintenance Regulations
  • Electrical System Troubleshooting
  • Aircraft Modification Experience
  • Heavy Machinery Operation
  • Forklift Operation
  • Material Handling
  • Crane operation expertise
  • Attentive to detail
  • Time Management
  • Excellent Communication
  • Continuous Learning Attitude
  • Staff Leadership

Timeline

Aircraft Structure Mechanic

Boeing
11.2023 - Current

Lead Machine Operator

Bridgestone Americas
05.2021 - 04.2023

Production Operator

West Pharmaceutical Services Inc
10.2020 - 05.2021

Assembly Technician

Spirit Aerosystems
05.2018 - 05.2020

Press Technician

Asmo
10.2015 - 01.2018

Hull Prep

Grady-white boats inc
04.2014 - 11.2014

Boat Builder

Albemarle Boats Inc
08.2013 - 03.2014

High School Diploma -

John A. Holmes High School

Associate of Applied Science - Electronic Engineering

Pitt Community College

Similar Profiles

CREATE PROFILE
Trey Cofield