Tyler Clenney
Aurora,CO
Summary
Proven Sheet Metal Worker with extensive experience at Bruce Mechanical, showcasing expertise in metal fabrication and a strong commitment to enhancing workplace safety. Demonstrated ability to improve project efficiency by over 30% through meticulous layout development and precision measuring. Excelled in team collaboration and problem-solving, consistently delivering high-quality HVAC installations and reducing material waste.
Overview
7
7
years of professional experience
Work History
Sheet Metal Worker
Bruce Mechanical
Denver, CO
11.2023 - 07.2024
- Did layout of our S/A and R/A to assure other trades were not going to be in our way
- Improved project efficiency by accurately measuring, cutting, and assembling duct work along with sealing duct work inside and out
- Enhanced workplace safety through proper use of tools and equipment during fabrication tasks.
- Completed projects on time by effectively prioritizing tasks and maintaining focus on work progress.
- Reduced material waste with precise measurements and optimal layout planning for sheet metal cutting.
- Maintained a clean and organized workspace, promoting an efficient and safe working environment for all employees and other trades
- Assisted in training new hires on the proper use of tools, equipment, and best practices in sheet metal work.
- Provided support in the repair or modification of existing structures or systems using expert knowledge in sheet metal work.
- Contributed to cost reduction efforts by accurately estimating required materials and minimizing waste during fabrication processes.
- Collaborated with team members to troubleshoot issues and streamline production processes for increased productivity.
- Observed safety practices and procedures to maintain safe and clean working environment.
- Increased client satisfaction by consistently delivering high-quality sheet metal products within established deadlines.
- Assembled air ducts, pipes, discharge valves and flues to central heating and cooling equipment.
- Removed old equipment from customers' homes and cleaned up areas to prepare for new installations.
- Installed bypass dampers, low voltage wiring, smoke detectors, split systems, and package units in commercial or residential buildings.
- Installed components to improve HVAC system performance.
Sheet Metal Worker
Legacy Mechanical
Denver, CO
05.2020 - 01.2023
- Fastened joints and seams together to assemble duct work properly with they type of connection
- Improved project efficiency by accurately measuring, cutting, and assembling sheet metal components.
- Enhanced workplace safety through prop er use of tools and equipment during fabrication tasks.
- Completed projects on time by effectively prioritizing tasks and maintaining focus on work progress.
- Performed quality finishes by assuring all hangers were secured properly and hung straight/ level
- Reduced material waste with precise measurements and optimal layout planning for sheet metal cutting.
- Maintained a clean and organized workspace, promoting an efficient and safe working environment for all staff members.
- Assisted in training new hires on the proper use of tools, equipment, and best practices in sheet metal work.
- Provided support in the repair or modification of existing structures or systems using expert knowledge in sheet metal work.
- Ensured high-quality workmanship by thoroughly inspecting finished products for alignment and compliance with specifications.
- Collaborated with team members to troubleshoot issues and streamline production processes for increased productivity.
- Observed safety practices and procedures to maintain safe and clean working environment.
- Measured parts using calipers, gauges and micrometers to confirm adherence to quality standards on final inspections.
- Maximized durability of final products by selecting appropriate materials for each project''s specific requirements.
- Exceeded customer expectations by addressing special requests or customizations promptly without compromising quality standards.
- Participated in regular team meetings, providing valuable input and feedback for continuous process improvement initiatives.
- Operated duct jacks to maneuver completed units into position for installation.
- Increased client satisfaction by consistently delivering high-quality sheet metal products within established deadlines.
- Used duct hoist to make it easier to hang duct work
- Assembled air ducts, pipes, discharge valves and flues to central heating and cooling equipment.
- Removed old equipment from customers' homes and cleaned up areas to prepare for new installations.
- Located and marked pipe positions, hole passages and duct connections in walls and floors.
- Installed bypass dampers, low voltage wiring, smoke detectors, split systems, and package units in commercial or residential buildings.
Sheet Metal Worker
Murphy Company Heating & Cooling
Brighton, CO
09.2018 - 01.2020
- Used rulers, squares and scribes to measure and mark dimensions and reference lines on materials.
- Fastened joints and seams together to assemble components into sheet metal products.
- Improved project efficiency by accurately measuring, cutting, and assembling sheet metal components.
- Enhanced workplace safety through proper use of tools and equipment during fabrication tasks.
- Assembled air ducts, pipes, discharge valves and flues to central heating and cooling equipment.
- Removed old equipment from customers' homes and cleaned up areas to prepare for new installations.
- Maintained a clean, organized workspace during installations and repairs, demonstrating respect for clients'' properties and minimizing disruptions.
- Located and marked pipe positions, hole passages and duct connections in walls and floors.
- Installed bypass dampers, low voltage wiring, smoke detectors, split systems, and package units in commercial or residential buildings.
- Promoted workplace safety by consistently following established protocols and diligently wearing appropriate personal protective equipment.
- Installed components to improve HVAC system performance.
- Increased client comfort levels by appropriately sizing and installing heating, ventilation, and air conditioning systems based on specific needs.
- Facilitated seamless transitions from older HVAC systems to newer models through expert removal of existing equipment and precise installation of replacements.
- Ensured top-quality installations by adhering to local building codes, manufacturer specifications, and industry best practices.
- Provided outstanding customer service throughout the entire project lifecycle, from initial consultation to final walkthroughs after completion of installations.
- Streamlined installation processes by properly preparing job sites, ensuring all necessary materials were on hand before beginning work.
- Boosted customer loyalty through exceptional follow-up service, addressing any concerns promptly and professionally.
- Connected heating or air conditioning equipment to water, fuel, or refrigerant sources to form complete circuits.
- Troubleshot complex HVAC issues using advanced diagnostic equipment and tools, identifying root causes quickly and accurately to minimize system downtime.
- Collaborated effectively with architects, engineers, electricians, and other construction professionals during large-scale projects, ensuring smooth coordination and successful outcomes.
- Advanced professional development with continued education in the latest HVAC technologies and techniques to stay current in the field.
- Reduced costly callbacks for clients by performing comprehensive quality control checks after each installation or repair.
- Worked overtime, holidays and weekends to accommodate company needs.
- Read blueprints, wiring diagrams, piping schemes and engineering specifications to diagnose and repair units.
- Surveyed building layout and gathered materials before beginning repairs.
- Performed troubleshooting on HVAC systems to determine root cause of issues.
- Kept accurate records of time and materials used for each job to compile into service reports.
- Installed HVAC system expansions, discharge valves, air ducts, dampers, and stokers.
- Analyzed blueprints and manufacturers' design specifications to determine HVAC equipment configuration and complete proper installation.
- Installed, connected and adjusted thermostats, humidistats and timers for optimal performance.
Carpenter Subcontractor
Brookline Builders
Erie, CO
01.2017 - 08.2018
- Utilized eco-friendly practices whenever possible, incorporating sustainable materials and energy-efficient techniques to minimize environmental impact.
- Collaborated with other subcontractors, maintaining clear communication to ensure smooth project execution.
- Showcased versatility in carpentry skills by working on various types of construction projects, ranging from residential to commercial properties.
- Increased efficiency in project completion by utilizing advanced tools and techniques in carpentry work.
- Ensured safety on job sites through strict adherence to OSHA guidelines and company policies.
Remodeling Crew Member
J&A Construction
Lakewood, CO
09.2017 - 04.2018
- Supported overall team success by assisting other crew members as needed.
- Implemented cost-saving measures by efficiently managing resources and minimizing waste during construction processes.
- Solved problems creatively during unforeseen complications while adhering to project specifications.
- Assisted in the planning and execution of complex remodeling projects, resulting in successful transformations.
- Increased client referrals by consistently delivering exceptional craftsmanship on all projects.
- Delivered aesthetically pleasing results through meticulous attention to detail when painting walls or installing fixtures.
- Ensured timely completion of assigned tasks while maintaining high-quality standards throughout each stage of the project.
- Demonstrated commitment to continuous improvement through proactive learning opportunities.
- Maintained a clean and organized worksite, ensuring minimal disruption to clients'' daily lives during renovations.
- Skillfully utilized hand tools, power tools, and heavy machinery to perform demolition, framing, drywall installation, and other related tasks.
- Used variety of hand and power tools to complete tasks.
- Cleaned and maintained tools, equipment and worksites.
- Followed instructions and safety protocols to prevent accidents and injuries.
- Loaded and unloaded materials and equipment onto and off construction sites.
- Moved and cleared debris from work sites to dispose of in designated areas.
- Managed safe and efficient use of tools and equipment on construction sites.
Education
GED -
GED
Denver, CO2011
Skills
- Metal Fabrication
- Hand-tool proficiency
- Mathematical Calculations
- Sheet Metal Bending
- Power Tool Operation
- Precision measuring
- Air Duct Assembly
- Layout Development
- Fastening Methods
- Blueprint Interpretation
- Power tool use
- Product Assembly
- Power tool safety
- Time Management
- Attention to Detail
- Problem-solving abilities
- Reliability
- Team Collaboration
- Organizational Skills
- Effective Communication
- Team building
- Self Motivation
- Professionalism
Timeline
Sheet Metal Worker
Bruce Mechanical
11.2023 - 07.2024
Sheet Metal Worker
Legacy Mechanical
05.2020 - 01.2023
Sheet Metal Worker
Murphy Company Heating & Cooling
09.2018 - 01.2020
Remodeling Crew Member
J&A Construction
09.2017 - 04.2018
Carpenter Subcontractor
Brookline Builders
01.2017 - 08.2018
GED -
GED