Tyrone Polk
Engineering operation Tech
Vicksburg,MS
Summary
Experienced equipment operator with a strong background in preventive maintenance and troubleshooting electrical systems. Proven ability to uphold safety standards while enhancing operational efficiency. Committed to improving team productivity through effective problem-solving and technical expertise.
Overview
19
19
years of professional experience
4
4
Certifications
Work History
Engineering operation technician
AWS
Canton
08.2024 - Current
- Operated machinery to support daily production in fast-paced environment.
- Conducted routine maintenance on equipment to ensure optimal performance levels.
- Collaborated with team members to troubleshoot technical issues effectively.
- Followed safety protocols to maintain secure workplace for all staff.
- Assisted in inventory management by accurately tracking supplies and materials.
- Documented work processes and reported findings to supervisors consistently.
- Supported training of new technicians on operational procedures and equipment usage.
- Participated in team meetings to discuss workflow improvements and operational objectives.
J3 instrument Electrician\Relief Shift Manager
International Paper
Vicksburg
05.2021 - 08.2024
- Installed electrical systems in manufacturing equipment for operational efficiency.
- Conducted routine maintenance on electrical machinery to ensure reliability.
- Diagnosed electrical issues and performed repairs on production lines.
- Collaborated with team members to uphold safety standards during installations.
- Assisted in troubleshooting complex electrical problems with minimal supervision.
- Maintained accurate records of work performed and materials used onsite.
- Followed blueprints and technical drawings for precise electrical installations.
- Participated in training sessions to enhance knowledge of industry best practices.
- Performed electrical installations, maintenance and repairs of electrical systems, wiring, fixtures and components.
- Installed conduit, wire and motor controls.
- Connected wires to circuit breakers, transformers, or other components.
- Connected wires to circuit breakers and transformers.
- Repaired or replaced worn or defective parts using hand tools and power tools.
- Ensured that all work was completed in accordance with applicable codes.
- Followed safety procedures when working on energized circuits; observed lockout and tagout requirements when servicing equipment.
- Installed cables, conductors and wire trays and completed necessary hook-ups for primary power lines.
- Identified problems with electrical systems by observing operation, listening for problems and using test equipment such as multi-meters.
- Diagnosed issues in electrical circuits and equipment and took proper corrective or preventive measures for repair.
- Placed and installed safety systems and set up emergency lighting, uninterruptible power systems and battery systems.
- Interpreted schematics, blueprints and diagrams to complete projects on time.
- Worked extensively on three-phase, 277/480 volt power distribution systems.
- Resolved safety issues related to faulty wiring installation practices in a timely manner.
- Inspected electrical equipment and systems to identify hazards, defects and the need for adjustment or repair.
- Assessed, tested and operated variety of electrical components and systems.
- Installed grounding system per NEC code requirements.
- Responded to emergency callbacks and provided onsite support.
- Evaluated electrical systems, equipment, and components to identify and resolve defects and safety risks.
- Performed electrical utility services for industrial-based and new building projects.
- Tested entire electrical assembly for performance levels and safety concerns.
- Diagnosed malfunctioning systems, apparatus and components to locate cause of breakdowns and correct problems.
- Developed accurate estimates and proposals to perform electrical installations and troubleshooting.
- Worked on high voltage switchgear projects involving transformer hookups and terminations up to 15kv level.
- Oversaw project details and adhered to diagnosis, wiring and OSHA regulations.
- Diagnosed malfunctioning systems using schematics diagrams and test instruments such as digital multimeters.
- Developed preventive maintenance programs for lighting systems, motors and controls.
- Selected equipment and fixtures to draft wiring layouts and develop plans for installation according to project specifications.
- Reviewed and assessed electrical, mechanical and architectural diagrams and specifications to accurately complete projects.
- Contributed to various projects, providing value to department, company and client base.
- Maintained current electrician's license or identification card to meet governmental regulations.
- Prepared sketches showing location of wiring and equipment or followed diagrams during installation process.
- Provided technical support on various types of motor control circuits including VFDs.
- Calibrated instruments to ensure accuracy of readings.
- Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
- Pulled insulated wires or cables through conduits to complete circuits.
- Dismantled electrical components using hand tools to disconnect and restore wiring connections.
- Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
- Trained workers to install, maintain and repair electrical equipment and fixtures.
Lube Technician
International Paper
Vicksburg
05.2018 - 04.2021
- Performed routine lubrication services on machinery and equipment.
- Conducted inspections to ensure proper fluid levels and machine functionality.
- Maintained cleanliness and organization of the work area and tools.
- Assisted in troubleshooting mechanical issues during maintenance checks.
- Collaborated with team members to streamline lubrication processes.
- Documented service records and maintenance logs accurately.
- Followed safety protocols to minimize risks during operations.
- Trained new technicians on lubrication techniques and safety practices.
- Performed oil changes and lubrication services on a variety of vehicles.
- Replaced cabin, fuel, air and oil filters and tested vehicle horn and lights.
- Checked fluids and maintenance-related parts and topped off or replaced.
- Installed new windshield wiper blades and checked tire pressure.
- Maintained tools, test equipment and materials, keeping work areas organized.
- Kept shop area neat and clean by removing debris and safely disposing of used oil.
- Adjusted tire pressure on vehicles and warned customers of leaks and tire damage.
- Answered questions regarding vehicle maintenance and recommended necessary repair work to keep vehicles operating properly.
- Checked for any signs of wear or damage to brakes, suspension systems, steering components, exhaust systems and other parts of the vehicle.
- Performed automotive preventive maintenance and inspected tires.
- Maintained records of all work performed according to company guidelines.
- Ensured that all tools were properly stored after use in order to maintain a clean working environment.
- Tested batteries using specialized equipment such as digital multimeters.
- Greeted customers in a friendly manner upon arrival at the service station.
- Disposed of used oil containers in accordance with local regulations.
- Inspected fluid level for steering gear, power steering reservoir, transmission, rear axle housings and shackles.
- Reported any mechanical issues found during inspection to the supervisor immediately.
- Diagnosed engine problems by performing visual inspections, listening for unusual noises or checking warning lights on the dashboard.
- Educated customers about preventive maintenance services available to them.
- Demonstrated excellent problem solving skills when dealing with difficult situations.
- Reviewed completed work and road-tested vehicles.
- Documented work performed on repair orders, submitting reports to supervisor for implementation into corporate system.
- Attended regular training sessions to stay up-to-date with industry standards.
- Replaced spark plugs and ignition wires when necessary.
- Diagnosed and repaired basic automotive issues for brakes, alignments, suspensions, cooling and electrical systems.
- Provided estimates for repair costs based on customer requests and needs.
- Assisted in ordering parts from suppliers when required.
- Cleaned engine components such as carburetors, distributors and fuel injectors with appropriate solvents or solutions.
- Inspected vehicles for damage and recorded findings to facilitate repairs.
- Checked vehicle mileage and determined necessary belts, fluids flushing or gasket replacements.
Power house Operator
International Paper
Vicksburg
10.2006 - 05.2018
- Operated machinery to ensure smooth production flow and efficiency.
- Monitored equipment performance and reported issues for timely maintenance.
- Collaborated with team members to meet daily production targets consistently.
- Followed safety protocols to maintain a secure working environment for all staff.
- Trained new operators on equipment use and safety procedures effectively.
- Conducted quality checks on products to ensure compliance with standards.
- Assisted in inventory management to track materials and supplies accurately.
- Maintained cleanliness of work area to promote a safe and organized environment.
- Maintained cleanliness of work area and equipment in accordance with safety regulations.
- Learned and followed safety and emergency procedures.
- Maintained production and quality documentation.
- Collaborated with coworkers to perform projects quickly and meet business goals.
- Inspected finished products to verify conformity to quality standards.
- Observed and troubleshot equipment and machines to detect malfunctions and notify appropriate personnel of needed repairs.
- Performed routine maintenance on equipment to ensure optimal performance.
- Checked control panel and gauges during equipment operation.
- Monitored and adjusted machine operations as needed for quality assurance.
- Assisted in the setup of production lines according to customer specifications.
- Set up tools, dies, jigs, fixtures, gauges and other related parts for use in production operations.
- Managed multiple tasks simultaneously while maintaining attention to detail.
- Set up and operated production machinery according to specific standards and protocols of company.
- Reduced health and safety risks with strict adherence to safety protocols and PPE requirements.
- Used daily system logs to document production information, discussing issues with management.
- Used hand trucks and forklifts to unload, load and transport items.
- Helped achieve team goals by rotating production lines and daily duties to meet demand.
- Calibrated machines to adhere to quality standards and maintain required productivity levels.
- Looked through work orders to determine type and quantity of materials needed for each production batch.
- Produced quality products by palletizing, packaging and assembling finished items.
- Hand-assembled needed parts with bolts and screws.
- Met or exceeded target for on-time customer shipments.
- Separated products according to weight, grade and size of material to produce final product.
- Sorted product components on work tables to maintain maximum organization and productivity.
- Classified defects from finished orders for record tracking and statistics.
- Prepared for work to be completed by studying assembly instructions, blueprint specifications and part lists.
- Received incoming shipments and reviewed contents against purchase order for accuracy.
Education
Some College (No Degree) - Electrical Technology
Hinds Community College
Unita, Mississippi, MSSkills
- Equipment maintenance
- Electrical troubleshooting
- Machine operation
- Safety compliance
- Preventive maintenance
- Team collaboration
- Technical documentation
- Inventory management
- Quality control
- Process improvement
- Problem solving
- Effective communication
- Time management
- Customer service
- Staff training
- Blueprint reading
- Electrical repair
- Mechanical tools
- Analytical/Scientific software
- Production Assistance
- Job site cleanup
- Diagnostic testing
- Inventory oversight
- OSHA compliance
- Troubleshooting
- Equipment operation
- Manufacturing processes
- Staff education and training
- Performance improvement
- Customer interaction
- Installation and repair
- System troubleshooting
- Product Inspections
- Operations monitoring
- System installation
- Preventative maintenance
- SOP enforcement
- Residential construction
- Heavy lifting
- Repair services
- Work Planning and Prioritization
- Document preparation
- HVAC systems
- System diagnostics
Certification
CST operator certified
Timeline
Engineering operation technician
AWS
08.2024 - Current
J3 instrument Electrician\Relief Shift Manager
International Paper
05.2021 - 08.2024
Lube Technician
International Paper
05.2018 - 04.2021
Power house Operator
International Paper
10.2006 - 05.2018
Some College (No Degree) - Electrical Technology
Hinds Community College