TYRONE L WELCH

• Complete over-haul on 3 bundle compressors

• Alignment using Rotalign laser

• Inspect and instal impellers and diaphragms

• Replace bearing on pumps and motors

• Laser Alignments using Rotalign

• Used hoisting and rigging equipment to move heavy machinery and equipment.
• Improved workplace safety with diligent adherence to protocols, lockout/tagout procedures, and hazard identification.

• Installed stationary industrial machinery and mechanical equipment according to layout plans.
• Aligned and leveled machines using precision measuring instruments to avoid unnecessary wear and tear.
• Improved workplace safety with diligent adherence to protocols, lockout/tagout procedures, and hazard identification.
• Maintained mechanical, electrical and pneumatic systems to keep systems working together correctly.
• Troubleshot electrical and mechanical issues, restoring equipment functionality with minimal downtime.

• Replaced defective parts of machines and adjusted clearances and alignment of moving parts.
• Aligned and leveled machines using precision measuring instruments to avoid unnecessary wear and tear.
• Improved workplace safety with diligent adherence to protocols, lockout/tagout procedures, and hazard identification.
• Enhanced equipment reliability by performing regular maintenance and repairs on industrial machinery.
• Assisted in the planning and execution of major shutdowns, ensuring timely completion of critical tasks within budget constraints.

• Inspected and tested all machinery components to ensure proper functionality.
• Replaced faulty parts such as bearings, gears, and shafts in a timely manner.
• Installed new equipment according to manufacturer specifications.
• Aligned motors, pumps, gearboxes, conveyors and other mechanical systems.
• Maintained records of all changes made to equipment during installation or modification process.

• Subcontracting for Plug Power

• Inspected electrical wiring installations for accuracy and provide safe good quality work with applicable codes prior to energizing.
• Commission dispensers, control panels, pumps and compressors and follow all procedures for phase 1 pre start up.
• Provide pressure testing on skid and roof to insure there in no leaks in the fittings.
• Conducted functional tests of all components in the system to ensure correct operation according to design specifications.
• Coordinated with vendors and subcontractors throughout the commissioning process.
• Analyzed data collected during commissioning activities to determine if additional adjustments were necessary.
• Programmed PLCs using ladder logic diagrams.
• Resolved complex problems that arose during the commissioning process in an efficient manner.
• Assembled and tested components, wiring and systems, locating and correcting faults to optimize production results.

Full over-haul on compressor and Turbine replaces Rotors and diaphragm. Taking measurements as found. Remove piping and parts needed.

• Assessed and corrected maintenance, installation, production, quality and design concerns.
• Diagnosed issues involving wind turbine generators and control systems to meet compliance with organizational and regulatory expectations.

Preventive maintenance and replacing lube boxes

• Disassembled machinery to remove parts and make repairs.
• Adjusted and repaired systems to meet manufacturers' performance specifications.

Vibration testing on motors

• Repaired and lubricated machines and equipment and assembled and installed equipment using hand tools and power tools.
• Completed routine preventive maintenance on heavy equipment, minimizing machinery downtime.
• Maintained clean and environmentally safe work area.
• Full over-haul on Compressor and Turbine replacing Rotors, diaphragms, bearings, oil seals.

• RPM Point blank,Texas Formos plant- rebuilding recip compressors and alignments using laser
• Installed machines in industrial and construction settings and tested to confirm proper working condition, vibration test on motors for complete diagnostic for Client
• Installed machines in industrial and construction settings and tested to confirm proper working condition.
• Calibrated or adjusted equipment using calipers, micrometers or ring gauges.
• Repaired and lubricated machines and equipment and assembled and installed equipment using hand tools and power tools. Take pride in work and provide safe and clean work area at all times
• Work with Seimens rep. On steam turbine replacing power cylinder, rotors, and pistons. Follows all task assigned by Rep. and documents all measurements and task. Use the correct tools for the right job. Don’t take shortcuts.

• Bolt-up and replace grating and beams

• Pipe stress, Replacing mechanical seals, Rebuilding recip compressors changing pistons and cylinders
• Reviewed equipment and daily job specifications, drawings and blueprints to properly and safely assemble [Type] machinery.
• Maintained compressors and equipment with scheduled cleaning, lubrication and filter replacement. Installed Pistonsamd valves in suction and discharge.

Installing Rotor and casing in a steam turbine

• Inspected and completed troubleshooting to repair machinery.
• Laser Alignments using laser and pipe stress.

• Pipe stress, Alignment on rotating Equipment, start-up and commissioning checking vibrations on motors, and verifying alignments.
• Inspected and completed troubleshooting per Seimens rep. Instructions. Replacing Rotors and valves for steam turbine. Take pride in quality of work and provide safe and clean work area at all times.

• Installing Equipment, Leveling Skids, Laser Alignments on motors and gearboxes.

• Install, Dismantle, or move machinery and heavy equipment using Crane and rigging equipment
• Assemble and install equipment according to layout plans, blueprints, or drawings
• Build, bolt up, and install Conveyors per blueprints.Complete Pre alignments and final alignments on motors
• Installed Ball mill and completed alignment on all equipment.Also, installed all plates inside ball safely per prints.Followed all assigned task instructed by supervisor
• Completedmotor runs for start up and documented times as needed
• Walk through Equipment for proper installation
• Sell off all equipment and final alignments to client per specs on blueprints.Follow all safety rules and procedures to complete task.Safety, Quality then production

• Installing and Maintaining equipment per blueprint
• Building and bolting up Conveyors, Bag houses, Fans, and any equipment as needed
• Dismantle, reassemble, level and align machines and equipment as needed
• Complete proper preventive maintenance on equipment and record on Log in sheet
• Complete motor runs and keep track of times for
• Startup
• Follow Lock-out Tag out, procedures and proper protocols
• Also, follow all assigned tasks instructed by supervisor. Rebuild steam turbines and compressor follow all task assigned by Mitsubishi rep.

• Inspect, troubleshoot,repair,install,clean,relocate and adjust production machinery and equipment
• Read blueprints and schematic drawings to determine work procedures
• Dismantle machinery or equipment, using hammers, wrenches,crowbars, and other hand tools
• Assemble and install equipment, such as shafts, conveyors, and tram rails
• Using handtools and power tools
• Align machines and equipment, using hoists, jacks, hand tools, squares, Lasers and plum bobs.Layout, assemble, fabricate, and Bolt up heavy machinery
• Measuring, cutting, threading, fabricating and installing pipes, valves and fittings
• Follow all instructions and directions given by direct supervisor
• Bolt up on structural Steel onFrame off building.

• TXAssemble, install, and dismantle machinery
• Set equipment and bolt material or equipment.

• Inspect, troubleshoot,repair,install,clean,relocate and adjust production machinery and equipment. Install Turbines and compressors.
• Read blueprints and schematic drawings to determine work procedures
• Dismantle machinery or equipment, using hammers, wrenches,crowbars, and other hand tools
• Assemble and install equipment, such as shafts, conveyors, and tram rails
• Using handtools and power tools
• Align machines and equipment, using hoists, jacks, hand tools, squares, Lasers and plum bobs.Layout, assemble, fabricate, and Bolt up heavy machinery
• Measuring, cutting, threading, fabricating and installing pipes, valves and fittings
• Follow all instructions and directions given by direct supervisor
• Bolt up on structural Steel onFrame off building.

• Preventive maintenance on conveyors and machines
• Follow all duties assigned by supervisor
• Laying out and
• Fabricating Structural steel and sheet metal in order to build metal structures
• Build and install iron or steel girders,
• Columns, and other construction materials to form buildings, bridges, and other Structures
• MAINTENANCE and Iron Work

• Perform work involving the skills of two or more maintenance or craft occupations to keep machines, mechanical equipment, or the structure of an establishment in repair
• Duties may involve pipe fitting; boiler making; insulating;welding; machining; carpentry; repairing electrical or mechanical equipment; installing, aligning, and balancing new equipment; and repairing buildings, floors, or stairs
• Bolt up all Structural steel Framework in accordance with engineered drawings
• Build and install iron or Steel girders, Columns, and other construction materials.

• Install Iron or steal Beams, Girders, and columns to form buildings, bridges, and other structures
• Bolt on all structural framework using air powered impact.

• Install, dismantle, or move machinery and heavy equipment according to layout plans, blueprints, or other drawings.Worked on turbine deck installing bearings and taking measurements
• Millwright/

• Aligned motors, worked on pre heaters, check soft foot
• Installed sump pumps,boiler feed pumps and boosterpumps.Assembled fly ash blowers, limestone booster blowers, bed ash blowers, SA and PA fans,hoppers, blow downtanks, limestone feeders, I.D fans, pug meals, conveyors,cooling towers
• Worked on all rotating equipment
• Did cleanenclosures
• Worked alot on the turbine deck installing equipment
• Really I was just completing all tasks or dutiesassigned by my supervisor.