Summary
Overview
Work History
Education
Skills
Job
Timeline
Generic

Victor Gonzales

Alvin,TX

Summary

Professional tradesperson prepared for demanding boilermaking roles, bringing hands-on experience in fabricating, assembling, and repairing boilers and large containers. Known for safety compliance and efficient work practices, with commitment to quality and reliability. Proven ability to collaborate with team members and adapt to evolving project needs, valued for technical skills and dependable work ethic.

Overview

6
6
years of professional experience

Work History

Boilermaker

REPCON
09.2024 - 10.2024
  • Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.
  • Maintained compliance with all safety procedures from both client and employer.
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Inspected equipment and structures to determine scope of work (SOW).
  • Built and repaired process tanks, storage tanks and water treatment tanks.
  • Used hand signals to notify crane operator to lift components to specific positions.
  • Dismantled equipment or devices to gain access and remove defective parts or components.
  • Identified issues and addressed each immediately with job foreman.
  • Interpreted blueprints, sketches, and specifications for each job.
  • Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.
  • Inspected equipment, structures and materials to identify cause of errors.
  • Upheld company reputation for excellence by consistently delivering high-quality workmanship that met or exceeded client expectations.
  • Operated forklifts, bobcats and track hoes.
  • Inspected and lubricated valves; removed, replaced, or installed components to correct operating deficiencies.
  • Coordinated movement of materials and equipment to job sites.
  • Used power hammers or weld pressure vessel tubes to achieve leakproof joints.
  • Ensured compliance with industry regulations through diligent adherence to codes and guidelines in all tasks performed.
  • Assembled and analyzed boilers for defects.
  • Cleaned and maintained boilers and associated equipment to increase efficiency and performance level.
  • Maximized boiler lifespan by identifying and addressing potential issues during routine inspections.

Boilermaker

Wyatt Field Service
05.2024 - 08.2024
  • Maintained compliance with all safety procedures from both client and employer.
  • Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Inspected equipment and structures to determine scope of work (SOW).
  • Built and repaired process tanks, storage tanks and water treatment tanks.
  • Used hand signals to notify crane operator to lift components to specific positions.
  • Dismantled equipment or devices to gain access and remove defective parts or components.
  • Identified issues and addressed each immediately with job foreman.
  • Interpreted blueprints, sketches, and specifications for each job.
  • Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.
  • Inspected equipment, structures and materials to identify cause of errors.
  • Upheld company reputation for excellence by consistently delivering high-quality workmanship that met or exceeded client expectations.
  • Operated forklifts, bobcats and track hoes.
  • Inspected and lubricated valves; removed, replaced, or installed components to correct operating deficiencies.
  • Coordinated movement of materials and equipment to job sites.
  • Used power hammers or weld pressure vessel tubes to achieve leakproof joints.

Boilermaker

SWS
06.2022 - 01.2023
  • Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.
  • Maintained compliance with all safety procedures from both client and employer.
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Inspected equipment and structures to determine scope of work (SOW).
  • Built and repaired process tanks, storage tanks and water treatment tanks.
  • Dismantled equipment or devices to gain access and remove defective parts or components.
  • Used hand signals to notify crane operator to lift components to specific positions.
  • Identified issues and addressed each immediately with job foreman.
  • Interpreted blueprints, sketches, and specifications for each job.
  • Inspected equipment, structures and materials to identify cause of errors.
  • Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.
  • Upheld company reputation for excellence by consistently delivering high-quality workmanship that met or exceeded client expectations.
  • Operated forklifts, bobcats and track hoes.
  • Inspected and lubricated valves; removed, replaced, or installed components to correct operating deficiencies.

Boilermaker

Wyatt Field Service
12.2021 - 06.2022
  • Increased workplace safety by conducting thorough inspections of boiler systems and components.
  • Removed boiler casings, grades, handrails, manhole, and hole covers to facilitate access to boilers or other vessels for repair.
  • Assembled and installed boilers, tanks and vats according to blueprints and specifications.
  • Utilized specialized tools and machinery to complete repairs and installation.
  • Streamlined repair processes, identifying and addressing issues swiftly to minimize operational disruptions.
  • Reduced potential hazards on-site, enforcing strict compliance with safety protocols and regulations.
  • Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.
  • Maintained compliance with all safety procedures from both client and employer.
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Inspected equipment and structures to determine scope of work (SOW).
  • Built and repaired process tanks, storage tanks and water treatment tanks.
  • Used hand signals to notify crane operator to lift components to specific positions.
  • Dismantled equipment or devices to gain access and remove defective parts or components.
  • Identified issues and addressed each immediately with job foreman.

Boilermaker

Turner
08.2020 - 11.2021
  • Works alone or as a member of a crew to assemble and disassemble, construct and repair boilers, tanks, vats, pressure vessels, exchangers, towers, and heaters according to blueprint specifications
  • Interprets plot plans, structural drawings, elevation drawings, as-built drawings, equipment arrangement drawings, P&IDs, isometric drawings, spool sheets, and detail sheets
  • Installs and removes various types of flanges, valves and actuators along with their components (bolts, nuts, gaskets, etc)
  • Inspects, tests, plugs, and replaces boiler tubes
  • Performs service, flow, head pressure, hydrostatic, and steam blow tests on piping systems and equipment
  • Inspects, maintains and replaces pipe hangers, supports, and spring can supports
  • Constructs and maintains towers, exchangers, vessels, and boilers
  • Attaches rigging and signal crane or hoist operators to lift heavy frames, plate sections, pipes, valves, or other parts into place
  • Minimum of 1 year experience performing related duties
  • NCCER or NCCER PLUS certification highly desired
  • Must be able to read and interpret engineering drawings or blueprints and be able to utilize them to identify and assemble internal tower equipment, take measurements and make calculations
  • Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting and/or moving of materials or equipment (over 80 pounds)
  • Requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, solvents, fumes and heavy equipment
  • Requires working in outdoor weather conditions
  • Requires constant standing, sitting, bending, crouching, walking, pulling, pushing, reaching, kneeling
  • Must be willing to work flexible hours, including weekends and/or evenings as necessary (based on project demands)
  • Requires frequently working in confined spaces
  • Requires working at all heights
  • Requires climbing up and down ladders, scaffolds and other objects

Boilermaker

Wyatt Field Service
06.2018 - 11.2019
  • Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.
  • Maintained compliance with all safety procedures from both client and employer.
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Inspected equipment and structures to determine scope of work (SOW).

Education

Bachelor Of Applied Arts - Digital Arts

Elsik
Houston, TX
08.2013

Skills

  • Hand and power tools
  • Structural steelwork
  • Safety procedures
  • Material prepping
  • Repair services
  • Heavy lifting
  • Repair work
  • Rigging
  • Boiler equipment
  • Grinding techniques
  • Organizational skills
  • Team collaboration
  • Work order completion
  • Critical thinking
  • Excellent communication
  • Reliability
  • Multitasking
  • Torch cutting
  • Problem-solving abilities
  • Teamwork
  • Parts replacement
  • Troubleshooting
  • Attention to detail
  • Installation and inspection
  • Cutting and threading
  • Demolition and dismantling
  • Metal cutting
  • Pipe cutting

Job

Boilermaker, 08/04/16, 1, Supervisor, Non-Exempt, Works alone or as a member of a crew to assemble and disassemble, construct and repair boilers, tanks, vats, pressure vessels, exchangers, towers, and heaters according to blueprint specifications., Interprets plot plans, structural drawings, elevation drawings, as-built drawings, equipment arrangement drawings, P&IDs, isometric drawings, spool sheets, and detail sheets., Installs and removes various types of flanges, valves and actuators along with their components (bolts, nuts, gaskets, etc)., Inspects, tests, plugs, and replaces boiler tubes., Performs service, flow, head pressure, hydrostatic, and steam blow tests on piping systems and equipment., Inspects, maintains and replaces pipe hangers, supports, and spring can supports., Constructs and maintains towers, exchangers, vessels, and boilers., Attaches rigging and signal crane or hoist operators to lift heavy frames, plate sections, pipes, valves, or other parts into place., Minimum of 1 year experience performing related duties.,Must be able to read and interpret engineering drawings or blueprints and be able to utilize them to identify and assemble internal tower equipment, take measurements and make calculations., Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting and/or moving of materials or equipment (over 80 pounds)., Requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, solvents, fumes and heavy equipment., Requires working in outdoor weather conditions., Requires constant standing, sitting, bending, crouching, walking, pulling, pushing, reaching, kneeling., Must be willing to work flexible hours, including weekends and/or evenings as necessary (based on project demands)., Requires frequently working in confined spaces., Requires working at all heights., Requires climbing up and down ladders, scaffolds and other objects., I understand a conditional offer of employment is being made to me contingent upon the satisfactory outcomes of pre-employment physical, drug test, training and all other onboarding processes required by GIS., I understand that my employment with GIS is voluntary and is subject to termination by myself or GIS at will, with or without cause or notice and no policy or any other written or oral representation may alter the at-will status of my employment., I agree to comply with all corporate policies, laws, rules, and regulations relating to my position. As an employee, I understand my duty to report any violations to my immediate supervisor, personnel manager or a representative of GIS' HR Department or by calling our confidential hotline at (855) 543-5163., The above description covers some of the principal duties and responsibilities of the job. The description shall not however, be construed as a complete listing of all miscellaneous, incidental or other duties which may be requested by my supervisor., I have read and understand all the duties and requirements listed above.

Timeline

Boilermaker

REPCON
09.2024 - 10.2024

Boilermaker

Wyatt Field Service
05.2024 - 08.2024

Boilermaker

SWS
06.2022 - 01.2023

Boilermaker

Wyatt Field Service
12.2021 - 06.2022

Boilermaker

Turner
08.2020 - 11.2021

Boilermaker

Wyatt Field Service
06.2018 - 11.2019

Bachelor Of Applied Arts - Digital Arts

Elsik
Victor Gonzales