Wayne Hebert

• Collaborated with team members to complete special projects, such as reorganizing storage areas or relocating large quantities of inventory.
• Enhanced warehouse efficiency by skillfully operating forklifts and moving products to designated locations.
• Reduced product damages by carefully transporting materials within the warehouse, ensuring proper handling.
• Contributed to a safe work environment by adhering to safety protocols and promptly reporting any hazards or incidents.
• Fostered a positive work environment by actively participating in team meetings and providing constructive feedback on process improvements.
• Maintained a clean and organized workspace by disposing of waste materials properly and keeping aisles clear of obstacles.
• Increased overall operational efficiency through consistent adherence to established procedures while operating forklifts.
• Operated forklift in compliance with OSHA guidelines and organizational policies.
• Unloaded and stacked materials by raising and lowering lifting devices.
• Communicated with floor managers to determine merchandise placement.
• Maneuvered forklift safely in congested and confined areas using [Skill] and [Technique].
• Inspected equipment for defects and performed repairs or maintenance tasks.
• Maneuvered forklift safely using appropriate load rates and maintaining clear visibility of work areas.
• Used strapping and bracing techniques combined with proper balancing to prevent load shifting.
• Operated equipment safely and efficiently to prevent damage to items and avoid injuries.
• Assessed equipment for damage, wear, battery life, and fluid levels.
• Promoted operational efficiency by maximizing loads on each transfer.

• Improved order fulfillment times with prompt picking, packing, and delivery of materials to designated areas within the facility.
• Maintained a safe work environment by adhering to safety regulations and proper handling of hazardous materials.
• Assisted in the training of new team members on best practices for safe, efficient, and accurate material handling procedures.
• Demonstrated adaptability in responding to unexpected fluctuations in demand or changes in production schedules.
• Upheld cleanliness standards in the warehouse by promptly disposing of waste materials, organizing workspaces, and maintaining a clutter-free environment.
• Supported timely production by ensuring the availability of required materials for each manufacturing stage.
• Managed time-sensitive tasks effectively under tight deadlines to ensure seamless workflow within the production line.
• Contributed to quality control measures by inspecting incoming materials for defects or damage prior to use in production.
• Participated in continuous improvement initiatives aimed at enhancing productivity, reducing waste, and minimizing errors in the material handling process.
• Collaborated with cross-functional teams to address material shortages and prevent production delays.
• Optimized warehouse space utilization by implementing strategic storage systems and effective material organization.
• Streamlined communication channels between departments by promptly reporting any discrepancies or issues related to materials during production stages.
• Collaborated with purchasing teams to ensure timely procurement and delivery of materials necessary for meeting production goals.
• Operated forklifts and pallet jacks to transfer large products from one area of warehouse to another, allowing for easier accessibility.
• Packed items into appropriate containers for shipment.
• Alerted supervisors and coworkers of hazards and other issues for quick resolutions.
• Transported inventory items to appropriate locations.
• Unloaded incoming shipments to verify accuracy of deliveries and check possible damages.
• Listened closely during team meetings to gain complete understanding of duties required for each shift, completing priority tasks first.
• Received and unpacked shipments and new equipment as directed.
• Read production orders, work orders, shipping orders and requisitions to determine items to be moved, gathered, or distributed.
• Kept storage areas organized, clean, and secure to fully protect company assets.
• Drove forklifts, pallet jacks and other equipment to move materials.
• Used machinery and equipment such as box cutters, shrink-wrap guns and electric pallet jacks.
• Surrounded items in cling film, padded blankets, and tape to protect from damage.
• Shipped material and performed boxing, packing, labeling, and preparation of related documents.
• Operated moving truck safely to deliver items to destination without nicks or scratches.
• Unpacked and repacked items in different quantities and configurations for shipment.
• Maintained clean, orderly work environment free of hazards.
• Strapped items down over protective padding to secure throughout transportation.
• Operated equipment while observing standard safety procedures.
• Successfully navigated large shipments of materials through tight spaces and busy facilities.
• Helped train new employees in safe practices and warehouse procedures.
• Assisted in receiving, stocking and distribution of merchandise.
• Verified quantity and description of materials received by checking merchandise against packing list.
• Assembled pallets and crates for secure transportation of materials.
• Loaded and unloaded materials onto and off of trucks for fast shipment.
• Verified documentation and condition of freight to assure quality standards were achieved.
• Delivered high-quality work on time and within budget, earning positive feedback from clients.
• Delivered outstanding service to customers to maintain and extend relationships for future business opportunities.
• Coordinated timely delivery of materials and resources to job sites, preventing delays in project timelines.
• Mentored junior staff members in industry best practices, fostering a culture of continuous learning within the team.
• Maintained overall safe work environment with employee training programs and enforcement of safety procedures.
• Observed packing operations to verify conformance to specifications.

Same as Above

• Performed daily safety checks to achieve safe operating condition of equipment.
• Operated large cranes to lift and move materials with precision and accuracy.
• Operated mobile crane and moved materials to various locations to meet job schedule demands.
• Demonstrated exceptional attention to detail while operating cranes for complex lifts, ensuring minimal disruption to surroundings.
• Experienced in inspecting cranes and related equipment for safety and operational defects.
• Maneuvered loads safely to achieve accuracy and stability.
• Controlled cranes from remote control panel for safe and accurate operation.
• Achieved strong reputation for reliability among supervisors, leading to increased responsibility for critical lifts on high-profile projects.
• Assisted in training new crane operators, sharing knowledge of best practices and providing guidance for skill development.
• Maintained optimal equipment performance by performing routine maintenance tasks and promptly addressing issues.
• Consistently met or exceeded lifting capacity targets while maintaining the highest level of safety during all operations.
• Ensured accurate load placement with expert use of rigging techniques and communication with ground crew members.
• Increased performance by safely and efficiently operating heavy machinery and equipment.
• Adapted seamlessly to new crane technologies, mastering control systems and adopting best practices for safe operation.
• Played an instrumental role in the prevention of accidents or incidents by actively engaging in safety meetings and implementing suggestions for improvement.
• Leveraged expertise in load-lifting attachments and rigging techniques to manage diverse loads.
• Optimized crane operations by continually refining lifting strategies based on site-specific conditions and requirements.
• Operated cranes and other equipment while monitoring coworker, personal and overall work zone safety.

• Completed deburring, buffing and polishing materials according to strict tolerances.
• Supported quality control efforts by performing routine inspections on finished products and adjusting work accordingly to adhere to strict tolerances.
• Streamlined operations by identifying areas for improvement within the grinding process, making necessary adjustments as needed.
• Enhanced safety in the workplace by following established guidelines and procedures for grinder operation.

• Received incoming shipments, compared contents against associated records and transmitted to proper department.
• Packaged goods in safe containers to prepare for shipping, adhering to packaging protocols.
• Used pallet jacks and dollies to load and unloaded goods from trucks and containers.
• Processed invoices and order forms for goods received and shipped for proof of transactions.
• Completed basic mathematical calculations to check weights and dimensions of shipments.
• Maximized warehouse space utilization by reorganizing storage areas according to product types, sizes, and turnover rates.
• Monitored scheduled shipment dates to achieve timely delivery, expediting as necessary, and communicating variances to customers.
• Conducted counts and audits of inventories to identify and resolve discrepancies in records.
• Improved shipping efficiency by streamlining packing procedures and optimizing workstation layouts.
• Operated equipment such as forklifts and balers to move outgoing shipments to loading area.
• Packed, secured, labeled and applied postage to materials to prepare items for shipment.
• Utilized forklift or pallet truck to load, unload, transport and store goods.

• Properly loaded and unloaded materials in and out of machines.
• Performed daily cleaning to keep machines in good working condition and prolong equipment lifespan.
• Inspected finished parts by checking for defects to meet quality standards.
• Increased product quality by adhering to strict tolerances and carefully monitoring machining processes.
• Moved finished work to correct staging area for disposition.
• Learned and followed safety procedures to keep machines operated safely and prevent accidents.
• Improved workplace safety, conducting regular inspections and promptly addressing any hazards or mechanical issues.
• Adhered to high level of safety by following company rules and regulations to prevent injuries.

• Assisted in employee training, boosting their skills and knowledge base for enhanced job performance.
• Prioritized tasks based on deadline requirements, ensuring timely completion of assignments without compromising quality.
• Trained and mentored new employees to enable safe and efficient job performance.
• Checked equipment to determine if maintenance was required.
• Played a crucial role in meeting project deadlines by effectively managing resources at hand.
• Monitored equipment maintenance, reducing downtime and maintaining optimal performance.
• Performed safety and environmental health observations and notified management of non-compliance issues to promote safe working conditions.
• Contributed to problem-solving efforts, identifying root causes of issues and implementing effective solutions.
• Established clear communication channels to foster teamwork and collaboration among team members.
• Promoted a culture of continuous improvement by encouraging innovation and idea-sharing among team members.
• Followed applicable safety and health policies and procedures to promote crew safety and minimize accidents.
• Served as the primary point of contact between management and frontline workers fostering seamless communication.
• Maintained high levels of worker morale through consistent encouragement leading to better retention rates.
• Investigated and reported on accidents, injuries and near-miss incidents.

• Completed deburring, buffing and polishing materials according to strict tolerances.
• Enhanced safety in the workplace by following established guidelines and procedures for grinder operation.
• Streamlined operations by identifying areas for improvement within the grinding process, making necessary adjustments as needed.
• Supported quality control efforts by performing routine inspections on finished products and adjusting work accordingly to adhere to strict tolerances.
• Moved finished work to correct staging area for disposition.
• Upheld company standards for cleanliness in the workspace, contributing to an organized and efficient environment conducive to productivity.
• Assessed finished pieces for compliance with standards and removed defective items.
• Collaborated with team members to optimize workflow processes and meet production deadlines.