Wesley Johnson

• March 2018 to September 2024 (Fabs D1/MSB/RP1)
• Ensured safety compliance, adhering to Industry standards and guidelines for equipment operation and maintenance, Following LOTO. Trainer and Certifier for CoHE on PLH planar tool set
• Level 3 Equipment for PLM/PLH Cu/Non Cu Planar Tool sets for Troubleshooting problems. One of 3 HCLU Troubleshooter and Rebuild technicians.
• Level 2 Equipment certified for PLM/PLH Cu/Non Cu Planar Tools, Error recovery technician. Level 1 Equipment certified for PLI/PLF Cu/Non Cu Planar tools, able to assist Level 2 or 3 Error recovery technician.
• First EAC (Equipment Area Coordinator) for Single point of Contact with Engineers and SGL (Shift Group Lead)

May 2013 to March 2018 (Fabs D1C/RP1)

• Ensured safety compliance, adhering to Industry standards and guidelines for equipment operation and maintenance, Following LOTO.
• Facilitated full Transition of running Production and Quails at individual tools to running all Production and Quails from the Command Center for FE Planar technicians
• Level 2 Equipment for assisting with Pad changes, Brush changes and Head rebuilds
• Level 1 Operations for Running Productions and Quails on AMAT PLM Polishers tool sets.

February 2010 to May 2013 (Fabs D1C/RP1)

• Ensured safety compliance, adhering to Industry standards and guidelines for equipment operation and maintenance, Following LOTO.
• Level 2 equipment for AMAT Endura Sputter tool sets
• Level 1 Operations and Maintenance for Thin Films AMAT Endura Sputter tool sets.
• Covered operations for Novellus Sabre EPN tool set.

August 2001 to February 2010 (Fab 20)

• Ensured safety compliance, adhering to Industry standards and guidelines for equipment operation and maintenance, Following LOTO.
• Level 3 (maintenance and troubleshooting) on Varian E500 and AMAT xR80 ion Implant tools
• Level 1 Operation Certification for Ion Implanter's and AMAT Radiance Centura (RTA) tools to keep production moving though both tool sets.
• I had Recipe Edit privileges for running Rework wafers on Ion Implanter's. Later I assisted Engineering on creating generic recipes for Standardize top offs recipes. I was also given step adjustment privileges for Production to move it back into Implanter steps or out after reworks are ran.
• I was first Blue Badge from Fab 20 Implant area to assisted in installing AMAT xR80 Ion Implanter in D2 (Intel's Santa Clara Fab). I would later be called back down to D2 to help Troubleshooting E-clamp Signal on Varian E500 Ion Implanter.
• I moved from Shift 7 to Shift 5 to increase productivity and consistency by bridging gaps between shift 7 and shift 5, for better communication. On shift 5, I spear headed bringing shift 5 Green to green times down
• Facilitated training sessions for new technicians, fostering collaborative learning environment for both shifts 7 and 5 teams by training 4 new trainees and 2 higher level SSTs on equipment PMs.

June 2000 to August 2001 (Fabs 15/15.5)

• Followed safety protocols to minimize workplace accidents using LOTO Protocols.
• Completed Level 3 Certification for Verian E1000 and E500 Ion Implanter tools sets
• Maintained Operations Certifications to assist my team and ensure area maintained smooth flow of Production.
• I was one of two certified operational coordinator later became Area coordinator. Responsible for reporting out tool issues and staffing issues for daily goal prepossess.
• Starting work at this Fab15 by helping to disassemble Varian E1000 implanter readying it to be moved from Fab15 to Fab15.5.
• Trained two new employees and two seed employees (from Fab 23) on proper operations and safety for protocols to full Level 1 certification. Also trained two seed employees and one new employee on Varian E500 A,B, and C preventive maintenance for their Level 2 equipment certifications.

February 1995 to April 1996 (Fab 6)

• Played pivotal role in achieving on-time delivery targets by optimized running production and quails on Varian 350D, 300xp and Eaton Nova 10-80 Implanter tools.
• Supported new employee training programs, sharing technical expertise and best practices to foster high-performing workforce by training two new employees in my area.
• Responsible for area output goals and communicating that to my manager and incoming and outgoing areas.
• Worked with maintenance technicians to coordinate tool Preventive Maintenance, and unscheduled maintenance.

April 1996 to June 2000 Fab 6

• Promoted to maintenance technician, Responsible for maintenance and troubleshooting on Eaton Nova 10-80, Varian 350D and 300xP.
• Provided technical support to team members, resolving equipment issues promptly to minimize downtime and maintain production flow by completing Maintenance Certifications for Ion Implanter's, Anelva Sputter tools and Disco Back Grind
• Actively participated in cross-functional team by Maintaining my Operation certification for Ion Implanter's tools and adding Operation certifications for Anelva Sputter and Disco back grind.
• Supported training programs, sharing technical expertise and best practices to foster high-performing workforce by training senor technician in Anelva Level 2 Maintenance and New Technician at Implant Level 2 maintenance
• Would regularly assist other technicians with tool repairs in Perk and Elmer Sputter tools.