Willard (Willlie) May

Welded various types of metals

• Demonstrated versatility in various welding methods including MIG, TIG, Stick, and Flux Core Welding techniques.
• Welded in flat, horizontal, vertical, and overhead positions.
• Measured and cut metal pieces to correct length and angle to attain proper fit and alignment of pieces.
• Maintained high-quality workmanship through consistent attention to detail and adherence to specifications.
• Maintained clean and organized work area to prevent workplace accidents.
• Read and followed blueprints and weld diagrams.
• Finished welding and fabrication projects using grinders.
• Utilized various tools, such as grinders and cutting torches, for proper preparation of materials prior to welding processes.
• Used cutting torches to shape and cut metal for fabrication projects.
• Demonstrated versatility in welding techniques, applying appropriate methods for each specific project requirement.
• Communicated with supervisors and engineers to verify quality of finished work met specifications.
• Contributed to the successful completion of large-scale projects by efficiently collaborating with multidisciplinary teams.
• Ensured safety compliance by adhering to industry standards and company guidelines in all tasks performed.
• Increased customer satisfaction with timely delivery of high-quality products that met or exceeded expectations.
• Resolved weld-related problems by researching and using appropriate repair practices.
• Enhanced productivity by implementing efficient welding techniques and processes.
• Reduced material waste for improved cost savings with precise fabrication measurements.
• Checked cut length frequently for deviations in cut length specs.
• Implemented innovative solutions for complex fabrication challenges, resulting in increased efficiency without sacrificing quality.
• Developed and implemented methods to increase efficiency in welding and fabrication.
• Consistently met or surpassed production targets while maintaining an unwavering commitment to safety and quality standards.
• Mentored junior welders on best practices, fostering a culture of continuous improvement within the team environment.
• Supported quality assurance initiatives through thorough inspection of completed work, ensuring compliance with industry standards.
• Expanded skill set by participating in ongoing professional development opportunities, including workshops and seminars.
• Tested strength and quality of welds using tension, bend and penetration tests.
• Welded metal components in vertical, overhead and flat positions.
• Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
• Bolted, clamped and tack-welded parts to secure components prior to welding.
• Maintained safety by wearing protective equipment, staying alert and following procedures.
• Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
• Selected and operated shielded metal arc and gas metal arc welding equipment.
• Inspected welds for accuracy and conformance to specifications.
• Welded various connections with high-quality final results.
• Avoided warping, shrinkage, and distortion by carefully controlling welding processes.
• Chipped away debris and thick crusts of rust, slag, and other materials to ready surfaces for welding.
• Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.
• Inspected pieces for defects, measured, and checked with straightedges or templates for compliance with specifications.
• Detected faulty operation of equipment and defective materials and promptly resolved issues.
• Completed projects safely by closely monitoring conditions when lighting torches and using tools.

• Reduced equipment failure rates through comprehensive inspections, identifying potential issues before they escalated into costly problems.
• Upheld equipment warranties by performing regular maintenance checks and documenting service records as required.
• Spearheaded troubleshooting efforts on malfunctioning equipment, swiftly diagnosing issues and implementing effective solutions to restore functionality promptly.
• Championed environmental sustainability initiatives by promoting responsible waste management practices during daily operations at worksites.
• Optimized machine performance by expertly aligning and calibrating components according to manufacturer specifications.
• Offered valuable insights during pre-construction meetings, contributing to informed decision-making regarding project logistics and resource allocation.
• Provided on-call support during critical situations, demonstrating commitment to job responsibilities and quickly addressing unexpected issues to minimize potential impact on project timelines.
• Contributed to safe work environments by strictly adhering to safety protocols and industry regulations during all aspects of job execution.
• Enhanced project efficiency by skillfully assembling and disassembling machinery components for various construction projects.
• Cultivated a culture of continuous improvement within the team by sharing best practices and staying current with industry trends, ensuring consistently high performance standards across all projects.
• Streamlined communication between management and field personnel, facilitating smooth information flow that enhanced overall operational effectiveness.
• Used hoisting and rigging equipment to move heavy machinery and equipment.
• Replaced defective parts of machines and adjusted clearances and alignment of moving parts.
• Aligned and leveled machines using precision measuring instruments to avoid unnecessary wear and tear.
• Adhered to all workplace safety policies, regulations and compliances.
• Made repairs and modified equipment by welding, soldering and brazing to avoid production delays.
• Read and interpreted blueprints and schematics to understand machinery design and layout.
• Inserted shims, adjusted tension on nuts and bolts and positioned parts, using hand tools and measuring instruments with [Number]% accuracy.
• Inspected and examined all machinery and equipment to detect malfunctions or irregularities.
• Disassembled machinery parts and categorized properly before moving to storage.
• Created durable and long-lasting structures to withstand industrial environment demands.
• Read blueprints to safely and efficiently assemble equipment worth up to millions
• Troubleshot machinery problems and suggested accurate repairs.
• Positioned steel beams to support bedplates of machines and equipment using blueprints and schematic drawings.

• Wore mandated safety equipment and used correct procedures for total site safety.
• Operated jackhammer, cutting saws and other power tools for demolition work.
• Conducted post-demolition site assessments, ensuring all required tasks were completed before moving onto subsequent projects.
• Performed selective demolition tasks with attention to detail, preserving historical elements as requested by clients or architects.
• Used sledgehammers, drills and hydraulic tools for detail work prior to full demolition.
• Increased client satisfaction by consistently delivering high-quality workmanship and timely results.
• Collaborated with architects, engineers, and other construction professionals to develop efficient demolition plans.
• Provided hands-on training for new employees, fostering a knowledgeable workforce capable of meeting industry demands.
• Ensured environmental compliance by properly disposing of hazardous materials and adhering to regulations.
• Assessed building for potential problems with demolition and adjusted strategies.
• Pulled out salvageable items before full structural demolition.
• Assisted traffic control measures to provide safe work zone and proper placement of signs and cones.
• Placed roll-off dumpsters in optimal locations to collect bulk debris.
• Identified ideal strategies for demolishing buildings and removing debris from structures based on work orders.
• Loaded debris, rubble and hazardous material into correct collection containers.
• Maximized resource utilization by recycling and repurposing salvageable materials from demolished structures.
• Enhanced safety by conducting thorough site inspections and implementing proper safety protocols.
• Improved project efficiency by coordinating with team members on specific demolition tasks.
• Maintained a clean worksite, ensuring the safe removal of debris and minimizing disruption to surrounding areas.
• Used variety of hand and power tools to complete tasks.
• Inspected tools and equipment to maintain safety and efficiency.
• Loaded and unloaded materials onto trucks and trailers.
• Mixed and poured concrete for variety of projects.
• Followed instructions and safety protocols to prevent accidents and injuries.
• Operated forklifts and boom lifts to complete various tasks.

• Maintained high-quality workmanship through consistent attention to detail and adherence to specifications.
• Read and followed blueprints and weld diagrams.
• Demonstrated versatility in welding techniques, applying appropriate methods for each specific project requirement.
• Communicated with supervisors and engineers to verify quality of finished work met specifications.
• Reviewed blueprints and schematics to ensure accurate fabrication according to design specifications.
• Contributed to the successful completion of large-scale projects by efficiently collaborating with multidisciplinary teams.
• Increased customer satisfaction with timely delivery of high-quality products that met or exceeded expectations.
• Resolved weld-related problems by researching and using appropriate repair practices.
• Enhanced productivity by implementing efficient welding techniques and processes.
• Mentored junior welders on best practices, fostering a culture of continuous improvement within the team environment.
• Tested strength and quality of welds using tension, bend and penetration tests.
• Developed strong working relationships with vendors and suppliers, enhancing communication channels for streamlined procurement processes.
• Welded metal components in vertical, overhead and flat positions.
• Selected and operated shielded metal arc and gas metal arc welding equipment.
• Demonstrated versatility in various welding methods including MIG, TIG, Stick, and Flux Core Welding techniques.
• Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
• Measured and cut metal pieces to correct length and angle to attain proper fit and alignment of pieces.
• Maintained clean and organized work area to prevent workplace accidents.
• Finished welding and fabrication projects using grinders.
• Utilized various tools, such as grinders and cutting torches, for proper preparation of materials prior to welding processes.
• Used cutting torches to shape and cut metal for fabrication projects.
• Prepared surfaces for welding by smoothing and removing debris to achieve proper adhesion and weld quality.
• Ensured safety compliance by adhering to industry standards and company guidelines in all tasks performed.
• Reduced material waste for improved cost savings with precise fabrication measurements.
• Checked cut length frequently for deviations in cut length specs.
• Developed and implemented methods to increase efficiency in welding and fabrication.
• Consistently met or surpassed production targets while maintaining an unwavering commitment to safety and quality standards.
• Supported quality assurance initiatives through thorough inspection of completed work, ensuring compliance with industry standards.
• Expanded skill set by participating in ongoing professional development opportunities, including workshops and seminars.
• Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
• Bolted, clamped and tack-welded parts to secure components prior to welding.
• Maintained safety by wearing protective equipment, staying alert and following procedures.
• Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
• Inspected welds for accuracy and conformance to specifications.
• Welded various connections with high-quality final results.
• Avoided warping, shrinkage, and distortion by carefully controlling welding processes.
• Chipped away debris and thick crusts of rust, slag, and other materials to ready surfaces for welding.
• Promoted a positive learning environment by establishing clear expectations and maintaining consistent classroom management techniques.
• Tracked student progress, frequently checking in with struggling students and identifying root causes of problems.
• Boosted student performance by providing individualized support and targeted feedback.
• Initiated new learning methods, eliminating instructional gaps and improving comprehension.
• Promoted classroom safety, collaboration, and best practices.
• Tested and evaluated students on materials presented in workshops and classes.
• Applied various teaching aids to minimize learning gaps and instruct and motivate students.
• Observed and adopted new techniques from skilled instructors and lecturers.
• Improved student performance by defining clear goals and communicating performance metrics.
• Optimized day-to-day instruction to align educational strategies with industry best practices.
• Fostered student curiosity and interest through creative hands-on activities.

• Measured and cut metal pieces to correct length and angle to attain proper fit and alignment of pieces.
• Maintained high-quality workmanship through consistent attention to detail and adherence to specifications.
• Read and followed blueprints and weld diagrams.
• Utilized various tools, such as grinders and cutting torches, for proper preparation of materials prior to welding processes.
• Ensured safety compliance by adhering to industry standards and company guidelines in all tasks performed.
• Checked cut length frequently for deviations in cut length specs.
• Maintained clean and organized work area to prevent workplace accidents.
• Finished welding and fabrication projects using grinders.
• Used cutting torches to shape and cut metal for fabrication projects.
• Demonstrated versatility in welding techniques, applying appropriate methods for each specific project requirement.
• Communicated with supervisors and engineers to verify quality of finished work met specifications.
• Reviewed blueprints and schematics to ensure accurate fabrication according to design specifications.
• Prepared surfaces for welding by smoothing and removing debris to achieve proper adhesion and weld quality.
• Contributed to the successful completion of large-scale projects by efficiently collaborating with multidisciplinary teams.
• Increased customer satisfaction with timely delivery of high-quality products that met or exceeded expectations.
• Resolved weld-related problems by researching and using appropriate repair practices.
• Reduced material waste for improved cost savings with precise fabrication measurements.
• Consistently met or surpassed production targets while maintaining an unwavering commitment to safety and quality standards.
• Mentored junior welders on best practices, fostering a culture of continuous improvement within the team environment.
• Supported quality assurance initiatives through thorough inspection of completed work, ensuring compliance with industry standards.
• Expanded skill set by participating in ongoing professional development opportunities, including workshops and seminars.
• Tested strength and quality of welds using tension, bend and penetration tests.
• Welded metal components in vertical, overhead and flat positions.
• Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
• Bolted, clamped and tack-welded parts to secure components prior to welding.
• Maintained safety by wearing protective equipment, staying alert and following procedures.
• Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
• Selected and operated shielded metal arc and gas metal arc welding equipment.
• Welded various connections with high-quality final results.
• Avoided warping, shrinkage, and distortion by carefully controlling welding processes.
• Chipped away debris and thick crusts of rust, slag, and other materials to ready surfaces for welding.
• Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.

• Fetched materials, equipment, and tools for welding professionals.
• Removed trash and excess materials to clean up work areas.
• Supported welders with precise measurements, cutting, and fitting of metal components for accurate assembly.
• Prepared welding equipment to perform advanced welding work.
• Maintained equipment in good working order.
• Kept positive attitude focused on learning new processes and techniques.