William Barbee
Elm City,North Carolina
Summary
Accomplished Automation and Controls Specialist with a proven track record at multiple companies adept at installation, maintenance and repair of Industrial Automation Systems. Pre-Commissioning the PLC Inputs and Outputs, Flashing the VFD's, Setting Up IP Addresses and Network Communication Interface, I am the link between Electrical Installation and Engineering, with the skillset of both aspects. Leading cross-functional teams and managing budgets to deliver projects that meet and exceed objectives in both Electrical, Controls, IT, and Engineering to ensure optimal production and safety standards. Expert in customer relations and a specialist in project planning, I leverage critical thinking and team leadership to drive success.
Overview
17
17
years of professional experience
1
1
Certification
Work History
Electrical Maintenance Technician
LS Cable Systems USA
04.2024 - Current
- Performed root cause analysis on recurring equipment failures and implemented corrective actions to prevent future occurrences.
- Enhanced equipment reliability by performing regular maintenance and troubleshooting electrical systems.
- Collaborated with engineering teams to design, install, and commission new equipment, ensuring optimal performance.
- Upgraded outdated equipment with modern technology to improve efficiency and reduce operational costs.
- Reduced downtime through efficient diagnosis and repair of electrical issues in production machinery.
- Coordinated with external contractors on major projects involving complex installations or repairs of high voltage systems.
- Ensured compliance with relevant codes, regulations, and industry best practices while performing all maintenance activities on electrical systems.
- Tested wiring and other system parts for electrical flow and function.
- Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
- Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
- Disconnected and removed motors and pumps.
- Installed electrical wiring through conduits and holes in both flooring and walls.
- Installed electrical conduit and wiring for power, controls, and lighting.
- Tested, troubleshot, and calibrated equipment in shop and field.
- Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
- Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
Small Business Owner
Wide Awake Construction
05.2008 - Current
- Managed all aspects of business ownership and operational management, keeping business running smoothly
- Developed and maintained relationships with clients and business partners
- Maintained up-to-date records of all transactions related to the business finances
- Kept detailed records of inventory, company budgets and payroll
- Organized and executed networking events with key industry professionals to foster relationships and expand clientele
- Created achievable goals to maximize growth and improve company morale
- Negotiated contracts with suppliers to support quality and cost-effectiveness
- Prepared staff work schedules and assigned specific duties
Project Manager of Electrical/ Mechanical
JCK
02.2017 - 11.2018
- Successfully managed projects with tight deadlines and limited resources
- Coordinated team members to ensure tasks were completed on time and within budget
- Collaborated with cross-functional teams across multiple departments to achieve goals
- Provided clear direction to internal teams, setting expectations and due dates for deliverables
Automation Technician
Intelligrated Conveyor Systems
07.2016 - 02.2017
- Configured software applications to control automated systems
- Collaborated with engineering teams to develop best practices for automating operations
- Programmed controllers for establishing communication between inputs and outputs
- Installed, programmed, and repaired programmable controllers, robot controllers, end-of-arm tools, and conveyors
- Attached wires between controllers
- Troubleshot mechanics, sensor and feedback systems, hydraulics, and pneumatics
- Simulated proposed processes to confirm feasibility and safety
- Collaborated with process control engineers to devise automation tactics
Automation Technician
Dematic Conveyor Systems
05.2015 - 07.2016
- Investigated root causes of defects in automated systems and implemented corrective actions
- Developed, maintained, and tested automation systems for manufacturing processes
- Collaborated with engineering teams to develop best practices for automating operations
- Installed and configured hardware components such as motors, drives, switches, relays
- Documented all changes made to the configuration of automation systems
- Implemented programmable logic controllers to automate industrial processes
- Monitored automation processes to verify functionality
- Troubleshot equipment and automated systems to address reported errors
- Programmed controllers for establishing communication between inputs and outputs
Automation Technician
Elite Force Staffing
06.2013 - 02.2014
- Experienced in identifying problems related to control systems including PLCs and HMIs
Industrial Journeyman Electrician
Prime Electrical Solutions
03.2009 - 07.2013
- Programmed PLCs using ladder logic, structured text, or other languages
- Assisted with the design of new electrical control systems from concept through completion
- Installed and tested electrical control systems in accordance with blueprints, schematics, and technical manuals
- Supervised installation and operation of electronic equipment and systems
- Assembled, tested and maintained circuitry and electronic components, according to engineering instructions, technical manuals and knowledge of electronics, using hand, and power tools
- Installed and maintained electrical control systems, industrial automation systems, and electrical equipment, including control circuits, variable speed drives, and programmable logic controllers
Electrical Controls Technician /U.L. Panel Builder
Triune Electric
02.2008 - 03.2011
- Identified potential areas for improvement in existing automation operations
- Conducted troubleshooting activities on automated equipment and systems
- Implemented programmable logic controllers to automate industrial processes
- Calibrated sensors, actuators, and other components of automated machinery
- Installed and configured hardware components such as motors, drives, switches, relays
- Collaborated with engineering teams to develop best practices for automating operations
- Monitored automation processes to verify functionality
- Inspected finished automation mechanisms for approving installation correctness
- Programmed controllers for establishing communication between inputs and outputs
Industrial Journeyman Electrician
Electrical Services Ltd
02.2008 - 04.2009
- Tested and troubleshot equipment to diagnose and correct malfunctions
- Replaced wiring, equipment, and fixtures using hand tools and power tools
- Installed conduit and pulled wires to complete circuits between boxes
- Estimated electrical costs for new projects based on existing systems, equipment and labor rates
- Installed, repaired and maintained electrical systems and components in compliance with local and national electrical codes
- Experienced in identifying problems related to control systems including PLCs and HMIs
- Well-versed in using specialized tools such as infrared thermometers and arc flash detectors
- Competently operated testing devices like voltmeters, meggers and oscilloscopes to check voltage levels for safety compliance
Education
Associate in Applied Science (A.A.S.) - Electrical Engineering
Nash Community College
Rocky Mount, NC05.2013
Skills
- Customer Relationship Management
- Programmable Logic Controllers
- Human-Machine Interface Design
- Variable Frequency Drives
- Hydraulic systems
- Pneumatic Systems
- Robotics
- Industrial Networking
- Electrical Troubleshooting
- Excellent Communication
- Problem-solving abilities
- Attention to Detail
- Reliability
Certification
- PLC Programming (Allen Bradley), Nash Community College, 2013
- Robotics Programming (Fanuc), Nash Community College, 2013
- 10-Hour OSHA Certification, Nash Community College, 2013
- 1-Year Diploma Elec/Electronics, Beaufort Community College, 2003
References
References available upon request
Timeline
Electrical Maintenance Technician
LS Cable Systems USA
04.2024 - Current
Project Manager of Electrical/ Mechanical
JCK
02.2017 - 11.2018
Automation Technician
Intelligrated Conveyor Systems
07.2016 - 02.2017
Automation Technician
Dematic Conveyor Systems
05.2015 - 07.2016
Automation Technician
Elite Force Staffing
06.2013 - 02.2014
Industrial Journeyman Electrician
Prime Electrical Solutions
03.2009 - 07.2013
Small Business Owner
Wide Awake Construction
05.2008 - Current
Electrical Controls Technician /U.L. Panel Builder
Triune Electric
02.2008 - 03.2011
Industrial Journeyman Electrician
Electrical Services Ltd
02.2008 - 04.2009
Associate in Applied Science (A.A.S.) - Electrical Engineering
Nash Community College
- PLC Programming (Allen Bradley), Nash Community College, 2013
- Robotics Programming (Fanuc), Nash Community College, 2013
- 10-Hour OSHA Certification, Nash Community College, 2013
- 1-Year Diploma Elec/Electronics, Beaufort Community College, 2003
Similar Profiles
Carlos ShieldsCarlos Shields
36 Bobbin Strander at LS Cable36 Bobbin Strander at LS Cable
Morris GinnMorris Ginn
Machinist/Machine Maintenance Mechanic at LS CableMachinist/Machine Maintenance Mechanic at LS Cable
CARLOS PULGAR PEREZCARLOS PULGAR PEREZ
Electrician at LS CABLEElectrician at LS CABLE