William Koetting
Houston,Tx
Summary
Experienced electrician with over a decade of hands-on experience in commercial and industrial settings. Demonstrated ability to adapt quickly to new challenges and positively contribute to business development initiatives. Known for punctuality, efficiency in task completion, and strong work ethic. Eager to bring dependable work attitude to your team and start contributing immediately.
Overview
13
13
years of professional experience
1
1
Certification
Work History
Industrial Electrician
MMR Constructors Inc
08.2022 - 06.2025
- Running rigid conduit
- Blowing jet-line
- Putting up unistrut
- Proficient in wiring up motors- 480V
- Strapping down pipe
- Using greenly and power pony to bend and thread pipe
- Running pipe underground
- Pulling cable
- Installed, maintained and repaired electrical wiring, controls and lighting systems.
- Connected wires to circuit breakers, transformers, and other components.
- Repaired and replaced equipment, electrical wiring and fixtures.
- Attached power cables to equipment such as electric range and motor.
- Observed functioning of installed equipment or system to detect hazards and need for adjustments, relocation or replacement.
- Tested circuit continuity to determine electrical compatibility and component safety.
- Inspected transformers and circuit breakers for malfunctions.
- Consulted with management on functionality and lifespan of electrical equipment, advising when continued use may be hazardous.
- Fabricated custom and replacement parts according to specifications, using hand tools.
- Managed business report generation, record keeping and supply ordering.
- Adhered closely to regulations and industry best practices.
- Executed electrical wiring plans for other electrical systems.
- Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
- Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.
- Installed 120/208-volt systems and 347/600-volt systems.
- Assessed electrical systems, equipment and components to identify hazards, defects and needed adjustments or repairs.
Journeyman Electrician
Mm constructors inc
07.2020 - 05.2022
- Running rigid conduit pulling wire pulling cable
- Installing breaker panels terminating running cable tray
- Completed rough-in, termination and underground work.
- Repaired and installed new fixtures, wiring, circuits and motors.
- Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
- Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment and handling of materials.
- Trained junior electrical professionals on proper procedures.
- Interpreted electrical codes and diagrams to complete electrical repair and installation tasks.
- Verified problems, investigated faults and troubleshot solutions to enhance installations.
- Troubleshooted systems and repaired equipment, ensuring compliance with all established guidelines.
- Read and understood technical drawings, diagrams, flow charts and project documentation to make accurate decisions about electrical system installations and repairs for each assignment.
- Evaluated existing electrical systems for maintenance, repair and update requirements.
- Performed troubleshooting to determine issues and appropriate action to complete tasks and provide quality installations.
- Diagnosed issues and developed effective solutions.
- Oversaw projects with personnel maintaining, repairing, testing and calibrating electrical systems, components and equipment.
- Performed detailed inspection and repairs on splicers, cables and equipment.
- Minimized downtime by efficiently completing installations and tests for breakers, CVs and CTs, insulators and surge arrestors while managing breaker wiring.
- Suspended breaker and motor control processes through delicate glanding AWP to rig cables.
- Installing and wiring up 480v motor.
- Completed complex glanding and terminating processes for wirings while safely working with systems.
Journeyman Electrician
Mm constructors inc
07.2020 - 05.2022
- Running rigid conduit pulling wire pulling cable
- Installing breaker panels terminating running cable tray
- Completed rough-in, termination and underground work.
- Repaired and installed new fixtures, wiring, circuits and motors.
- Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
- Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment and handling of materials.
- Trained junior electrical professionals on proper procedures.
- Interpreted electrical codes and diagrams to complete electrical repair and installation tasks.
- Verified problems, investigated faults and troubleshot solutions to enhance installations.
- Troubleshooted systems and repaired equipment, ensuring compliance with all established guidelines.
- Read and understood technical drawings, diagrams, flow charts and project documentation to make accurate decisions about electrical system installations and repairs for each assignment.
- Evaluated existing electrical systems for maintenance, repair and update requirements.
- Performed troubleshooting to determine issues and appropriate action to complete tasks and provide quality installations.
- Diagnosed issues and developed effective solutions.
- Oversaw projects with personnel maintaining, repairing, testing and calibrating electrical systems, components and equipment.
- Performed detailed inspection and repairs on splicers, cables and equipment.
- Minimized downtime by efficiently completing installations and tests for breakers, CVs and CTs, insulators and surge arrestors while managing breaker wiring.
- Suspended breaker and motor control processes through delicate glanding AWP to rig cables.
- Installing and wiring up 480v motor.
- Completed complex glanding and terminating processes for wirings while safely working with systems.
Journeyman Electrician
Ines Olefins & Polymers Usa
03.2018 - 07.2020
- Running conduit pulling wire pulling cable Installing breaker panels terminating running cable tray switchgear and working in the MCC'5
- Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment and handling ot materials.
- Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
- Operated tools according to prescribed safety practices.
- Repaired and installed new fixtures, wiring, circuits and motors.
- Completed rough-in, termination and underground work.
- Suspended breaker and motor control processes through delicate glanding work, using AWP to rig cables.
- Minimized downtime by efficiently completing installations and tests for breakers, CVTs and CTs, insulators and surge arrestors while managing breaker wiring.
- Performed detailed inspection and repairs on splicers, cables and equipment.
Journeyman Electrician
Ines Olefins & Polymers Usa
03.2018 - 07.2020
- Running conduit pulling wire pulling cable Installing breaker panels terminating running cable tray switchgear and working in the MCC'5
- Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment and handling ot materials.
- Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
- Operated tools according to prescribed safety practices.
- Repaired and installed new fixtures, wiring, circuits and motors.
- Completed rough-in, termination and underground work.
- Suspended breaker and motor control processes through delicate glanding work, using AWP to rig cables.
- Minimized downtime by efficiently completing installations and tests for breakers, CVTs and CTs, insulators and surge arrestors while managing breaker wiring.
- Performed detailed inspection and repairs on splicers, cables and equipment.
Journeyman Electrician
MEITEC Electrical and Instrumentation
10.2017 - 03.2018
- Pulling wire running bending conduit breaker panels cable tray running cable reading blue prints switch gear handle materials
- Completed rough-in, termination and underground work.
- Repaired and installed new fixtures, wiring, circuits and motors.
- Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
- Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment and handling of materials.
- Carried out timely preventive maintenance actions, inspections and repairs on equipment.
- Suspended breaker and motor control processes through delicate glanding work.
Journeyman Electrician
MEITEC Electrical and Instrumentation
10.2017 - 03.2018
- Pulling wire running bending conduit breaker panels cable tray running cable reading blue prints switch gear handle materials
- Completed rough-in, termination and underground work.
- Repaired and installed new fixtures, wiring, circuits and motors.
- Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
- Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment and handling of materials.
- Carried out timely preventive maintenance actions, inspections and repairs on equipment.
- Suspended breaker and motor control processes through delicate glanding work.
Electrical Apprentice
KBR
05.2016 - 02.2018
- Running conduit pulling wire setting up breaker panels terminating receptacles running cable tray
- Handled installation of electrical components by splicing, joining and connecting wire.
- Pulled EMT and PVC conduit wire according to plans and code requirements.
- Terminated wiring and connected circuits with correct techniques.
- Adhered to electrical and building codes when installing and repairing electrical systems or components.
- Executed electrical wiring and other electrical systems.
- Installed 120/208-volt systems and 347/600-volt systems.480v 277v and 240v
- Assessed electrical systems, equipment and components to identify hazards, defects and needed adjustments or repairs.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Followed strict schedules to install and test 120/208- and 247/600-volt systems.
- Installed new electrical components and fixtures safely and tested systems to enhance power flow.
Electrical Apprentice
KBR
05.2016 - 02.2018
- Running conduit pulling wire setting up breaker panels terminating receptacles running cable tray
- Handled installation of electrical components by splicing, joining and connecting wire.
- Pulled EMT and PVC conduit wire according to plans and code requirements.
- Terminated wiring and connected circuits with correct techniques.
- Adhered to electrical and building codes when installing and repairing electrical systems or components.
- Executed electrical wiring and other electrical systems.
- Installed 120/208-volt systems and 347/600-volt systems.480v 277v and 240v
- Assessed electrical systems, equipment and components to identify hazards, defects and needed adjustments or repairs.
- Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Followed strict schedules to install and test 120/208- and 247/600-volt systems.
- Installed new electrical components and fixtures safely and tested systems to enhance power flow.
Apprentice Electrician
International Electric
05.2015 - 05.2016
- Doing commercial work working at College Station Texas at Texas A&M at the cane hall hotelMy job duties were remodeling the new construction running MC cable doing receptacles pulling wire and running conduit running cable tray operating scissor lift and helping journey man complete task.
- Worked with various types of cableways, conduits and other electrical raceways.
Apprentice Electrician
International Electric
05.2015 - 05.2016
- Doing commercial work working at College Station Texas at Texas A&M at the cane hall hotelMy job duties were remodeling the new construction running MC cable doing receptacles pulling wire and running conduit running cable tray operating scissor lift and helping journey man complete task.
- Worked with various types of cableways, conduits and other electrical raceways.
Electrical Apprentice
Siemens
08.2014 - 05.2016
- Working on switchgear pulling wire running conduit breaker panels terminating
- Spliced, joined and connected wire to fixtures and other electrical components.
- Followed strict schedules to install and test 120/208- and 247/600-volt systems.
- Cable tray wire way assembly.
Electrical Apprentice
Siemens
08.2014 - 05.2016
- Working on switchgear pulling wire running conduit breaker panels terminating
- Spliced, joined and connected wire to fixtures and other electrical components.
- Followed strict schedules to install and test 120/208- and 247/600-volt systems.
- Cable tray wire way assembly.
Electrical Apprentice
Meitec Electrical & Instrumentation
12.2013 - 08.2014
- Running wire way pulling wire pulling cable running cable tray assisting every journeyman to complete tasks
- Assist journeyman in running emt pipe.
Electrical Apprentice
Meitec Electrical & Instrumentation
12.2013 - 08.2014
- Running wire way pulling wire pulling cable running cable tray assisting every journeyman to complete tasks
- Assist journeyman in running emt pipe.
Apprentice Electrician
ISC Constructors, LLC
05.2012 - 12.2013
- My position was running conduit pulling wire running wire way running cable tray setting up breaker panels working in the MCC's and I traveled all the way from Houston to Colorado and live there and worked and completed the job task.
- Organized materials and tools in to maintain clean and neat work areas.
- Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge.
- Pulled wire through conduits and through holes in walls and floors.
- Helped complete system installations, digging trenches and breaking up concrete.
Apprentice Electrician
ISC Constructors, LLC
05.2012 - 12.2013
- My position was running conduit pulling wire running wire way running cable tray setting up breaker panels working in the MCC's and I traveled all the way from Houston to Colorado and live there and worked and completed the job task.
- Organized materials and tools in to maintain clean and neat work areas.
- Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge.
- Pulled wire through conduits and through holes in walls and floors.
- Helped complete system installations, digging trenches and breaking up concrete.
Education
High-school Diploma - undefined
Katy High-school
Katy, TXTrade School Certificate - Industrial Electricity Power Technology
Houston Community College
Houston, TX01.2007
Skills
- Electrician
- Construction
- Machine Operator
- Electrical experience
- Low voltage
- Schematics
- Blueprint reading
- Heavy equipment operation
- Hand tools
- Remodeling
- Commercial electrician experience
- Variable Frequency Drives (VFDs)
- Hand Benders
- Reading Technical Materials
- Project Planning
- Critical Thinking
- Layout Drawings
- Electrician Assistance
- Voltage Electrical Equipment
- Electrical Schematics
- Detailed Instruction
- System Testing
- Lighting Management
- Installing Electrical Components
- Wiring Installation
- Emergency Lighting
- Electrical Installations
- Optimization Strategies
- Safety Violations
- Industrial Control Systems
- Component Replacements
- Equipment Troubleshooting
- Production Evaluation
- Onsite Support
- Circuitry Diagnostics
- Process Monitoring
- Mechanical Reasoning Skills
- Business Administration
- Installing Fixtures
- Repairing Electrical Systems
- Regulatory Standards
- Electrical Safety
- Follow Blueprints
- Construction Methods
- Voltage and Current Meters
- Conduit and Pipe Laying
- National Electric Code NEPA 70
- Hand and Power Tool Operation
- Comply with Codes
- State Electrician's License
- Electrical Wiring and Fixtures
- Circuit Continuity Assessment
Personal Information
- Willing To Relocate: Anywhere
- Title: Industrial electrician
- Availability: ASAP, Anywhere
- Visa Status: authorized to work in the US for any employer
Authorized To Work
US for any employer
Certification
TLR electrician certified twic card
Timeline
Industrial Electrician
MMR Constructors Inc
08.2022 - 06.2025
Journeyman Electrician
Mm constructors inc
07.2020 - 05.2022
Journeyman Electrician
Mm constructors inc
07.2020 - 05.2022
Journeyman Electrician
Ines Olefins & Polymers Usa
03.2018 - 07.2020
Journeyman Electrician
Ines Olefins & Polymers Usa
03.2018 - 07.2020
Journeyman Electrician
MEITEC Electrical and Instrumentation
10.2017 - 03.2018
Journeyman Electrician
MEITEC Electrical and Instrumentation
10.2017 - 03.2018
Electrical Apprentice
KBR
05.2016 - 02.2018
Electrical Apprentice
KBR
05.2016 - 02.2018
Apprentice Electrician
International Electric
05.2015 - 05.2016
Apprentice Electrician
International Electric
05.2015 - 05.2016
Electrical Apprentice
Siemens
08.2014 - 05.2016
Electrical Apprentice
Siemens
08.2014 - 05.2016
Electrical Apprentice
Meitec Electrical & Instrumentation
12.2013 - 08.2014
Electrical Apprentice
Meitec Electrical & Instrumentation
12.2013 - 08.2014
Apprentice Electrician
ISC Constructors, LLC
05.2012 - 12.2013
Apprentice Electrician
ISC Constructors, LLC
05.2012 - 12.2013
High-school Diploma - undefined
Katy High-school
Trade School Certificate - Industrial Electricity Power Technology
Houston Community College