Overview
Work History
Education
Skills
Timeline
Generic

William Morris

Wiggins,MS

Overview

14
14
years of professional experience

Work History

Millwright

Idaho Forest Group
12.2022 - Current
  • Assembled machines and bolted, welded or riveted components to foundation or other structures using hand tools and power tools.
  • Disassembled defective machines for further inspection and repairs.
  • Repaired and lubricated machines and equipment and assembled and installed equipment using hand tools and power tools.
  • Fabricated spare parts from raw materials such as steel bars or plates.
  • Completed routine preventive maintenance on heavy equipment, minimizing machinery downtime.
  • Troubleshot problems with hydraulic systems and pneumatics.
  • Lubricated moving parts of machinery at regular intervals to prevent breakdowns.
  • Maintained accurate records of all repairs performed on machinery.
  • Inspected and tested all machinery components to ensure proper functionality.
  • Completed corrective and predictive maintenance on industrial machinery to replace worn parts and prevent breakages.
  • Used rigging, hoists and equipment to move heavy machinery between locations and complete installations.
  • Inspected operating safety devices for proper functionality after repairs, installations, modifications and installations.
  • Ensured safety regulations were followed while performing tasks.
  • Adjusted machinery and repaired or replaced defective parts to save company on repair fees.
  • Used and maintained shop equipment to prevent downtime and reduce safety hazards.
  • Maintained clean and environmentally safe work area.
  • Inspected and completed troubleshooting to repair machinery.
  • Aligned motors, pumps, gearboxes, conveyors and other mechanical systems.
  • Reassembled machines after repair work was completed.
  • Replaced faulty parts such as bearings, gears, and shafts in a timely manner.
  • Monitored the operation of machinery during production runs.

Driller

RAPAD Drilling Company
12.2013 - 12.2021
  • Removed core samples during drilling to determine nature of strata being drilled.
  • Operated and maintained drilling equipment, such as pumps, compressors, top drives, swivels, tongs and hoists.
  • Managed jobs using database and industrial control software.
  • Communicated effectively with customers throughout the duration of each job.
  • Analyzed soil samples taken from the drill hole in order to determine geology information about the area being drilled into.
  • Maintained well control systems to ensure safety while drilling operations are in progress.
  • Monitored drill bit performance and adjusted accordingly for optimal results.
  • Developed strategies for dealing with difficult terrain or weather conditions while operating a drill rig.
  • Trained crews on drill work procedures and safety.
  • Calculated loads necessary for lifting heavy objects onto or off the rig platform safely.
  • Supervised and documented drilling operations.
  • Counted sections of drill rod to determine depths of boreholes.
  • Adhered strictly to company policies pertaining to health and safety regulations.
  • Conducted regular inspections of drill pipe threads and connections to maintain quality standards.
  • Supervised all day drilling operations and provided troubleshooting expertise.
  • Maintained adequate quantities of supplies and spare parts for drilling operations.
  • Adhered to corporate and job site safety procedures to protect personnel and equipment.
  • Designed protocols for rig moving operations with focus on minimizing accident risks and equipment downtime.
  • Observed pressure gauge and moved throttles and levers to control speed of rotary tables and regulate pressure of tools at bottoms of boreholes.
  • Ensured that all safety protocols were followed at all times during the drilling process.
  • Cleaned and maintained work areas after every job was completed.
  • Inspected equipment for safety and functionality and completed regular maintenance.
  • Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.

Electronics Technician

C&J Energy Services
01.2013 - 11.2013
  • Prepared electronic components based on approved bill-of-materials for assembly and soldering.
  • Documented repairs, inspections and testing for equipment in logging database.
  • Reviewed service manuals and schematics while troubleshooting to determine root cause of malfunctioning units.
  • Compiled and maintained records documenting engineering schematics and installed equipment.
  • Replaced defective parts using soldering techniques as required.
  • Developed detailed testing procedures for new products to ensure quality control standards were met.
  • Installed, configured, tested, maintained, repaired and troubleshot electronic components, systems and equipment.
  • Tested completed products to ensure compliance with safety regulations and industry standards.
  • Read schematics and technical diagrams to determine the best course of action for repairs or modifications.
  • Analyzed data collected from tests performed on various pieces of equipment in order to identify any issues that may require further investigation or corrective action.
  • Assembled electrical systems or prototypes using hand tools or measuring instruments.
  • Identified and diagnosed malfunctioning electronic components, systems, and equipment.
  • Worked both independently and with crews to interpret electrical malfunctions and make repairs quickly to minimize downtime for customers.

Communication/Navigation Avionics Technician

United States Air Force Reserve
06.2010 - 01.2013
  • Installed and maintained navigational aids and automated weather observation systems.
  • Read complex manuals to review repair procedures.
  • Completed in-depth visual and manual inspections of electrical components.
  • Repaired faulty circuit boards by soldering replacement parts onto existing boards.
  • Maintained aircraft environmental systems, oxygen systems, fire extinguishing systems and utility systems.
  • Assisted other technicians in troubleshooting various aircraft electronic malfunctions.
  • Replaced faulty components within the avionics system according to established guidelines.
  • Troubleshot and resolved complex problems associated with aircraft electronic systems.
  • Inspected, tested and repaired avionics systems such as navigation, communication, auto-pilot and instruments.
  • Recorded maintenance performance in aircraft logbooks and completed other paperwork requirements.
  • Repaired or installed new wiring, boxes, antennas and other system pieces.
  • Diagnosed issues with avionics systems using technical manuals and schematics.
  • Programmed software updates into onboard computers to enhance operational performance of aircraft systems.
  • Performed functional tests on avionics systems to ensure proper performance.

Education

Associate of Science - Information Technology

Southern New Hampshire University
Hooksett, NH
04-2016

Skills

  • Parts Installation
  • Repair Work
  • Safety Compliance
  • Structural Welding
  • Parts Repair
  • Issue and Problem Resolution
  • Diagram and Schematic Knowledge
  • Mechanical Tool Usage
  • Equipment Installation
  • Safety Procedures
  • Machinery Maintenance
  • Power Tool Operation
  • Equipment Inspection
  • Heavy Lifting
  • Troubleshooting
  • Equipment Repair

Timeline

Millwright

Idaho Forest Group
12.2022 - Current

Driller

RAPAD Drilling Company
12.2013 - 12.2021

Electronics Technician

C&J Energy Services
01.2013 - 11.2013

Communication/Navigation Avionics Technician

United States Air Force Reserve
06.2010 - 01.2013

Associate of Science - Information Technology

Southern New Hampshire University

Similar Profiles

CREATE PROFILE
William Morris