Summary
Overview
Work History
Education
Affiliations
Certification
References
Timeline
Generic
WILLIAM ROSS

WILLIAM ROSS

Tomball

Summary

Adaptable professional with a quick-learning ability and a talent for adjusting to new environments. Skilled in rapidly acquiring new knowledge and applying it effectively. Driven by a passion for continuous learning and successfully navigating change.

Overview

25
25
years of professional experience
1
1
Certification

Work History

Owner/Operator Technician

Ross Services
Labadie
03.1998 - 02.2012
  • Performed preventive maintenance on HVAC systems to ensure peak performance and energy efficiency.
  • Repaired or replaced defective parts such as compressors, motors, fans and other components in heating and cooling systems.
  • Installed, repaired and maintained residential HVAC equipment, including furnaces, air conditioners, heat pumps and duct systems.
  • Cleaned evaporator coils, condensate drains and blower wheels to maintain optimal efficiency of the unit.
  • Troubleshot and diagnosed issues with HVAC equipment, providing recommendations for remediation.
  • Documented all repair work performed on HVAC units according to company standards.
  • Checked pressure readings on gauges connected to the system in order to diagnose any malfunctions.
  • Troubleshot complex control circuits involving relays, transformers and switches.
  • Maintained and serviced HVAC systems and refrigeration equipment.
  • Replaced worn out filters at regular intervals to improve air quality inside the premises.
  • Calibrated thermostats, tested capacitors and checked refrigerant levels for proper functioning of the system.
  • Inspected electrical wiring of existing HVAC systems to identify potential problems and safety hazards.
  • Recovered refrigerant from old HVAC units prior to disposal according to local environmental regulations.
  • Examined heating and air conditioning systems and air compressors for signs of defects or malfunction.
  • Followed safety procedures when working on high voltage wiring or gas lines.
  • Performed routine checks on various components of the system such as contactor's, relays and solenoids.
  • Resolved customer complaints regarding installation or service issues in a timely manner.
  • Adjusted controls to obtain desired temperature settings within the home or office environment.
  • Assembled sheet metal pieces into ductwork sections using rivets or screws as needed.
  • Assessed efficiency of HVAC and refrigeration systems to provide feedback to customers.
  • Provided customers with information about new technologies available for their heating and cooling system upgrades.
  • Promptly responded to complaints about temperature problems during massive heatwave and conducted assessments to determine causes and target solutions.
  • Adept at reading blue prints of electrical equipment.
  • Diagnosed and repaired faults in HVAC systems, including refrigerant leaks, electrical issues, and mechanical failures.
  • Assisted in the selection and sizing of HVAC equipment for new installations, based on detailed load calculations.
  • Designed and implemented custom HVAC solutions to meet specific customer requirements and building specifications.
  • Calibrated HVAC equipment and systems for optimal performance and energy efficiency.
  • Monitored and adjusted building automation systems to improve HVAC system performance and efficiency.
  • Performed ductwork repairs and modifications to improve system airflow and indoor air quality.
  • Provided technical support and guidance to clients on the operation and maintenance of their HVAC systems.
  • Performed emergency repairs on HVAC systems to restore heating and cooling services in critical situations.
  • Conducted air quality tests and recommended solutions for improving indoor air quality in residential and commercial settings.
  • Responded to customer inquiries and complaints, providing timely and effective solutions to HVAC issues.
  • Coordinated with contractors and construction teams on new installations and major repair projects.
  • Completed basic repairs such as changing belts, servicing fans and motors and cleaning coils, strainers and filters to optimize equipment performance.
  • Repaired parts by using technical knowledge, special tools and soldering skills.
  • Mounted compressors, condensers and other components in specified locations using hand tools and various welding equipment.
  • Read technical manuals and schematics to understanding specific configurations.
  • Cut and drilled holes in floors, walls and roofs to install equipment using power saws and drills.
  • Put in new gas lines, wiring and other support components for HVAC systems.
  • Tracked repairs made, labor time and parts used to calculate bill.
  • Inspected job site before project start to identify obstacles and resolve issues.
  • Trained and guided employees on correct methods for performing different repairs and maintenance services.
  • Loaded materials, tools and equipment on truck at beginning of each shift.
  • Diagnosed and identified faulty components in malfunctioning HVAC systems using specialized testing tools.
  • Completed preventive maintenance on heating and air conditioning systems to extend life of such equipment.
  • Retained careful and thorough maintenance and repair records in case customers required future service.
  • Advised customers on energy-saving measures and upgrades for older HVAC systems to improve efficiency.
  • Utilized HVAC diagnostic software and tools to accurately identify and resolve system issues.
  • Updated and maintained service records and documentation for all HVAC maintenance and repair activities.
  • Implemented safety protocols and procedures to ensure safe working conditions for all HVAC-related tasks.
  • Conducted regular system inspections and preventative maintenance tasks, reducing system downtime and repair costs.
  • Repaired and modified heating, ventilating and air conditioning (HVAC) systems to improve efficiency.
  • Tested equipment following each install to determine efficiency and proper functionality.
  • Assessed system operations to identify potential areas requiring maintenance services.
  • Adjusted and repaired systems to meet manufacturers' performance specifications.
  • Planned work procedures using charts, technical manuals and experience.
  • Repaired electrical equipment using hand and power tools and testing and diagnostic equipment.
  • Installed new electrical wiring and equipment in accordance with local codes and regulations.
  • Performed routine maintenance on electrical systems such as motors, transformers, and generators.
  • Built panels containing relays, switches, circuit breakers, according to customer specifications.
  • Provided technical support by troubleshooting issues related to electrical systems.
  • Maintained records of all repairs performed on electrical systems.
  • Tested existing electrical components to ensure proper functioning.
  • Inspected all electrical components for damage or wear and tear.
  • Connected and repaired equipment based on mechanical drawings and electrical prints.
  • Ensured that all work was completed in compliance with industry standards and regulations.
  • Performed monthly, semi-annual and annual Preventive Maintenance Checks and Services (PMCS).
  • Read and worked from electronic blueprint drawings.
  • Frequently worked overtime, weekends and holidays.
  • Provided electrical services and control wiring for diverse locations.
  • Established outstanding relationships with electricians and consumers.
  • Tested energized and de-energized circuits, following test procedures and assisted in specialized test procedures.
  • Monitored the performance of existing equipment in order to identify potential areas of improvement.
  • Provided training sessions regarding safe use and handling of electrical systems.
  • Assisted in the development of safety procedures for working with hazardous materials.
  • Conducted performance tests on newly installed equipment to ensure optimal operation.
  • Calibrated instruments used for testing purposes in order to maintain accuracy of readings.
  • Programmed PLCs for the control of automated machinery.
  • Implemented preventive maintenance protocols to reduce downtime due to system failure or malfunctioning components.
  • Collected and analyzed data and created reports based on findings.
  • Inspected electrical systems, equipment and components to identify hazards, defects, and the need for adjustment or repair.
  • Tested circuitry and electronic components according to engineering instructions, technical manuals or knowledge of electronics.
  • Assembled and tested components, wiring and systems, locating and correcting faults to optimize production results.
  • Tested performance of in-development parts, assemblies and systems under simulated operating conditions to optimize plans.
  • Leveraged outstanding communication, interpersonal and people skills to work well with clients.
  • Constructed and evaluated electrical components for consumer electronics applications.
  • Strategized alternative uses for current electronics designs to reduce energy usage.
  • Calculated design specifications or cost, material and resource estimates.
  • Designed or modified engineering schematics using computer-aided design software.
  • Evaluated engineering proposals and drawings to assess feasibility and conformance with sound electrical engineering practices and safety standards.
  • Built, calibrated and maintained electrical instruments used in design development processes.
  • Set up and operated specialized or standard test equipment to diagnose, test or analyze performance of electronic components, assemblies or systems.
  • Authored clear and detailed engineering specifications to clarify design details and functional criteria of each unit.
  • Conducted statistical studies to analyze or compare production costs for sustainable or nonsustainable designs.
  • Repaired faulty wiring or replaced defective parts to restore functionality of circuits and systems.
  • Tested and repaired electric motors, variable frequency drives, alarms and control systems.
  • Utilized specialized tools such as voltmeters, ammeters, ohmmeters to diagnose problems within circuitry.
  • Maintained inventory of parts for immediate and emergency repairs.
  • Diagnosed equipment malfunctions and completed repairs to restore equipment and maintain uptime.
  • Reviewed blueprints and engineering drawings to determine project scope and objectives.
  • Performed diagnostics and testing to locate root causes and resolve issues for optimal performance.
  • Read and interpreted technical manuals, drawings and schematics to make accurate repair decisions.
  • Tested electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures.
  • Climbed towers, worked in confined crawl spaces and worked flexible, non-standard workweek.
  • Installed, maintained, and repaired electrical wiring, equipment, and fixtures, ensuring compliance with codes.
  • Performed preventive, predictive and corrective maintenance to keep machinery running at optimal levels.
  • Compiled and maintained records documenting engineering schematics and installed equipment.
  • Maintained system logs or manuals to document testing or operation of equipment.
  • Diagnosed malfunctioning systems, apparatus, and components, using test equipment to locate the cause of a breakdown and correct the problem.
  • Performed preventative maintenance on electrical systems and equipment to ensure efficient operation.
  • Completed day-to-day duties accurately and efficiently.
  • Contributed innovative ideas and solutions to enhance team performance and outcomes.
  • Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
  • Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
  • Prioritized and organized tasks to efficiently accomplish service goals.
  • Identified needs of customers promptly and efficiently.
  • Provided excellent service and attention to customers when face-to-face or through phone conversations.
  • Assisted with customer requests and answered questions to improve satisfaction.
  • Collaborated closely with team members to achieve project objectives and meet deadlines.
  • Worked with cross-functional teams to achieve goals.
  • Approached customers and engaged in conversation through use of effective interpersonal and people skills.
  • Maintained updated knowledge through continuing education and advanced training.
  • Recognized by management for providing exceptional customer service.
  • Exceeded customer satisfaction by finding creative solutions to problems.
  • Conducted comprehensive research and data analysis to support strategic planning and informed decision-making.
  • Utilized advanced technical skills and expertise to troubleshoot complex problems and implement solutions.
  • Utilized various software and tools to streamline processes and optimize performance.
  • Achieved cost-savings by developing functional solutions to problems.
  • Worked effectively in team environments to make the workplace more productive.

HVAC-R Service Technician

All Climate Services
St Louis
05.2005 - 04.2007
  • Identified potential issues with existing HVAC-R systems before they became major problems.
  • Answered service calls to address ventilation, air conditioning and heating system issues.
  • Repaired faulty wiring, motors, compressors, condensers, evaporators, and other components of HVAC-R systems.
  • Serviced units to residential and commercial heating and air conditioning customers.
  • Completed detailed reports documenting all service activities related to each job assignment.
  • Used troubleshooting methods on HVAC components to diagnose and repair heat pumps, fireplace, geothermal, furnaces and air conditioning equipment.
  • Installed new HVAC-R systems in residential and commercial settings according to manufacturer specifications.
  • Explained proper use and care instructions to customers after completing a repair or installation job.
  • Ordered necessary parts from suppliers in order to complete jobs efficiently.
  • Followed up with customers after job completion in order to ensure satisfaction with the results.
  • Maintained records of customer service calls including type of work performed, time spent on job site, materials used.
  • Tested components of heating and cooling systems using specialized tools and equipment.
  • Calibrated thermostats for optimal performance of heating and cooling system units.
  • Ensured that all safety standards were followed when performing service on HVAC-R equipment.
  • Collaborated with contractor representatives, supervisors, co-workers and sub-contractors on job sites to streamline operations.
  • Provided recommendations on energy efficient products that could help save money on utility bills.
  • Inspected ductwork for leaks or blockages prior to installing a new unit.
  • Performed preventative maintenance on HVAC-R systems, such as cleaning, adjusting, and replacing parts.
  • Reported problems with company tools and vehicles to crew foreman for quick resolution.
  • Attended employee meetings and training to learn about new techniques, trends and technologies.
  • Replaced worn out parts of HVAC-R systems with new components according to manufacturer instructions.
  • Wired both line and low voltage to heating and cooling equipment.
  • Verified that the installation site was suitable for the type of system being installed.
  • Unloaded and loaded truck supplies and equipment using proper hoisting techniques to avoid accidents and injuries.
  • Conducted brazing, threading pipe and tasks to complete service calls.
  • Interpreted construction drawings and cut sheets in field.
  • Reviewed worklists from supervisor to interpret project details and instructions.
  • Installed heating, air conditioning and ventilation equipment and tested for proper operation.
  • Disassembled units, repaired broken components and restored to operating condition.
  • Examined heating and air conditioning systems and air compressors for signs of defects or malfunction.
  • Installed, maintained and repaired commercial refrigeration systems.
  • Adept at reading blue prints of electrical equipment.
  • Promptly responded to complaints about temperature problems during massive heatwave and conducted assessments to determine causes and target solutions.
  • Assessed efficiency of HVAC and refrigeration systems to provide feedback to customers.
  • Calibrated HVAC equipment and systems for optimal performance and energy efficiency.
  • Advised customers on energy-saving measures and upgrades for older HVAC systems to improve efficiency.
  • Installed and maintained residential and commercial HVAC systems to ensure optimal operation and energy efficiency.
  • Utilized HVAC diagnostic software and tools to accurately identify and resolve system issues.
  • Responded to customer inquiries and complaints, providing timely and effective solutions to HVAC issues.
  • Monitored and adjusted building automation systems to improve HVAC system performance and efficiency.
  • Implemented safety protocols and procedures to ensure safe working conditions for all HVAC-related tasks.
  • Assisted in the selection and sizing of HVAC equipment for new installations, based on detailed load calculations.
  • Managed inventory of HVAC parts and supplies, ensuring availability of necessary components for repairs and installations.
  • Designed and implemented custom HVAC solutions to meet specific customer requirements and building specifications.
  • Collaborated with sales teams to provide technical expertise and support for HVAC product sales.
  • Diagnosed and repaired faults in HVAC systems, including refrigerant leaks, electrical issues, and mechanical failures.
  • Trained junior technicians on HVAC repair and maintenance techniques, tools, and safety practices.
  • Completed basic repairs such as changing belts, servicing fans and motors and cleaning coils, strainers and filters to optimize equipment performance.
  • Read technical manuals and schematics to understanding specific configurations.
  • Assessed system operations to identify potential areas requiring maintenance services.
  • Mounted compressors, condensers and other components in specified locations using hand tools and various welding equipment.
  • Repaired parts by using technical knowledge, special tools and soldering skills.
  • Trained and guided employees on correct methods for performing different repairs and maintenance services.
  • Responded quickly to emergency calls from customers whose HVAC-R equipment had broken down unexpectedly.
  • Diagnosed problems with HVAC-R systems to determine necessary repairs or replacements.
  • Provided technical support to customers regarding operation and maintenance of their heating and cooling systems.
  • Presented job proposals for service repair or new units for new and existing customers.
  • Maintained safe working environment with proper execution of HVAC guidelines and usage of PPE equipment.
  • Maintained and serviced HVAC systems and refrigeration equipment.
  • Retained careful and thorough maintenance and repair records in case customers required future service.
  • Updated and maintained service records and documentation for all HVAC maintenance and repair activities.
  • Conducted regular system inspections and preventative maintenance tasks, reducing system downtime and repair costs.
  • Performed emergency repairs on HVAC systems to restore heating and cooling services in critical situations.
  • Provided technical support and guidance to clients on the operation and maintenance of their HVAC systems.

Building Engineer

P & P Restaurant's
St Louis
07.2000 - 04.2005
  • Installed new fixtures and equipment as needed throughout the facility.
  • Monitored contractor performance, working with vendors to meet regulatory and organizational physical specifications.
  • Responded quickly to tenant inquiries or complaints regarding building operations.
  • Coordinated scheduling of preventive maintenance programs according to manufacturer's recommendations.
  • Maintained building systems including HVAC, plumbing and electrical components.
  • Conducted regular inspections of all mechanical, electrical, and plumbing systems.
  • Established procedures for routine cleaning activities throughout the facility.
  • Repaired drywall, furniture, doors, windows, and lockets as required by tenants or management staff.
  • Provided technical support for troubleshooting problems related to building systems.
  • Coordinated building repair and construction projects, maintaining security and emergency response to provide preventive and corrective maintenance.
  • Reviewed blueprints or other documents prior to initiating any major renovation projects.
  • Tracked inventory levels of parts used in repair and maintenance projects in order to maintain adequate stock.
  • Assessed HVAC, electrical units and mechanical equipment to maintain functionality.
  • Operated facility cooling and electrical systems to support data center operations.
  • Ensured compliance with applicable codes related to building construction and safety regulations.
  • Performed preventative maintenance on all equipment, ensuring optimal operation.
  • Managed vendor relationships for procurement of supplies necessary for ongoing maintenance work.
  • Assisted with the development of emergency response plans in case of power outages or other issues.
  • Led resolution of physical site issues, environmental damage and hazardous spills.
  • Implemented quality control measures designed to minimize risk associated with operations.
  • Collaborated with professionals to assist server installation, removal, and other maintenance duties.
  • Updated records related to maintenance activities and inventory levels.
  • Performed routine maintenance by inspecting drives, motors or belts.
  • Implemented troubleshooting techniques to resolve issue.
  • Diagnosed and corrected mechanical problems using blueprints, repair manuals or parts catalogs.
  • Ordered parts, supplies or equipment from catalogs or suppliers.
  • Set up and operated machine tools to repair or fabricate jigs, fixtures or tools.
  • Assembled, installed or repaired electrical or electronic components and pipe systems.
  • Adjusted devices or control instruments using hand tools, levels or straightedges.
  • Cleaned or lubricated shafts, bearings or other parts of machinery.
  • Inspected, operated or tested machinery or equipment to diagnose machine malfunctions.
  • Estimated costs to repair machinery, equipment or building structures.
  • Designed equipment to aid repair or maintenance of machines, mechanical equipment or building structures.
  • Aligned and balanced new equipment after installation.
  • Scheduled and supervised contractors for various repairs and renovations.
  • Inspected buildings to identify safety hazards and potential areas of improvement.
  • Routinely inspected equipment for preventive and emergency maintenance needs.
  • Planned and laid out repair work using diagrams, drawings or schematic diagrams.
  • Installed equipment to improve energy or operational efficiency of residential or commercial buildings.
  • Dismantled machines, equipment, or devices to access and remove defective parts.
  • Repaired machines, equipment or structures using tools or equipment.
  • Implemented preventive maintenance practices and upheld equipment guidelines to avoid failures.
  • Recorded type and cost of maintenance or repair work.
  • Maintained or repaired specialized equipment or machinery.
  • Operated hand tools such as wrenches, pliers, screwdrivers and drills for repair work.
  • Replaced worn or damaged components in accordance with manufacturer specifications.
  • Inspected finished products for quality assurance purposes prior to releasing them from the facility.
  • Troubleshot complex problems by conducting detailed tests on electrical systems using various instruments.
  • Performed routine maintenance tasks on electrical systems including replacing fuses, checking wiring connections and testing circuits.
  • Monitored all repairs to ensure they are completed within a specified timeframe.
  • Adjusted system settings to ensure optimal performance of the machinery.
  • Maintained an accurate inventory of spare parts used in repair jobs.
  • Diagnosed issues with malfunctioning systems and components using specialized testing equipment.
  • Provided training sessions for other technicians on proper installation techniques for machinery components.
  • Installed new machinery components including bearings, seals, gears, and other parts.
  • Recommended changes in designs or procedures when needed in order to improve efficiency.
  • Cleaned machine parts to remove dirt and debris prior to making any repairs.
  • Repaired and maintained mechanical equipment such as pumps, motors, conveyors, and production machines.
  • Analyzed data collected from test results to determine necessary repairs or adjustments.
  • Read blueprints and technical diagrams to understand the layout of the machinery being repaired.
  • Researched new technologies related to repairing industrial machines in order to stay current with industry trends.
  • Delivered knowledge of design techniques, tools and principles involved in production of precision technical plans, blueprints, drawings and models.
  • Evaluated defective items returned from customers for warranty purposes.
  • Tested repaired items for proper operation prior to returning them to customers.
  • Resolved customer complaints in a timely manner while providing exceptional service.
  • Examined machines and equipment to diagnose or make repairs.
  • Reassembled equipment, completing inspections, testing or repairs.
  • Communicated with management, engineering and quality departments to solve technical repair problems.
  • Dismantled devices to gain access to and remove defective parts with various hand and power tools.
  • Recorded completed repairs, all further repairs required and parts to be ordered on service call ticket.
  • Followed repair processes, driving high quality and short cycle time.
  • Tested parts and mechanisms to meet tolerances and product specifications.
  • Identified engineering documentation and maintenance manuals to assess design configuration and conduct repair actions.
  • Coordinated with suppliers to order replacement parts as needed.
  • Documented repair processes and outcomes for internal records and customer reports.
  • Developed and maintained positive relationships with customers to encourage repeat business.
  • Responded to emergency repair calls in a timely and efficient manner.
  • Provided customer support, explaining complex repair processes in understandable terms.
  • Offered recommendations on device care and maintenance to customers.
  • Updated device software and firmware to latest versions to enhance functionality.
  • Ensured compliance with all relevant health and safety regulations during repair work.
  • Conducted quality assurance tests post-repair to verify device functionality.
  • Performed soldering tasks to repair or replace damaged electronic components.
  • Diagnosed and repaired a wide range of electronic equipment to manufacturer specifications.
  • Collaborated with team members to troubleshoot challenging repair cases.
  • Troubleshot malfunctions and diagnosed issues to service equipment quickly and fully.
  • Ran tests on newly repaired machinery and equipment to confirm proper functionality.
  • Communicated with distributors to acquire necessary equipment for projects.
  • Adjusted, connected, or disconnected wiring, piping and tubing to complete repairs and installations.
  • Consulted blueprints and manufacturer manuals to plan appropriate and effective repair work.
  • Relayed important safety guidelines to clients to achieve thorough understanding of new equipment.
  • Established preventive maintenance plans to reduce breakdowns of equipment over time.
  • Inspected completed jobs for quality assurance purposes.
  • Performed system and component failure analysis using diagnostic troubleshooting techniques.
  • Repaired and performed quality testing of products to meet established specifications.
  • Replaced faulty components in devices, including screens, batteries, and circuit boards.
  • Conducted routine maintenance on various types of machinery to ensure optimal performance.
  • Assisted in training new technicians on repair procedures and company policies.
  • Followed safety guidelines and wore protective gear when using power drills, circular saws, and other power tools.
  • Installed new components or replaced defective parts to restore functionality.
  • Disassembled dysfunctional machinery to perform root cause analysis and repairs.

Chief Engineer

Wyndham
St Louis
05.1999 - 07.2000
  • Led engineering teams to design and implement advanced systems and structures.
  • Collaborated with cross-functional teams to ensure project alignment and efficiency.
  • Managed project timelines, budgets, and resource allocations effectively.
  • Developed innovative solutions to optimize engineering processes and workflows.
  • Mentored junior engineers, fostering skill development and knowledge sharing.
  • Conducted thorough risk assessments to identify potential project challenges.
  • Ensured compliance with industry standards and regulations throughout projects.
  • Reviewed technical documentation for accuracy and completeness prior to implementation.
  • Performed regular inspections of equipment to identify areas of improvement or repair needs.
  • Oversaw maintenance and continuous operation of building systems, including mechanical (HVAC), electrical and safety.
  • Administered hands-on instruction in basic maintenance, safety and troubleshooting procedures.
  • Managed capital improvement projects to keep expenses within operational budgets.
  • Provided training as needed on proper usage of tools, software applications.
  • Collaborated with other departments within the organization to meet shared objectives.
  • Provided leadership and guidance to junior engineers on day-to-day tasks.
  • Oversaw activities of contractors working within building and on job sites.
  • Ensured that safety protocols were followed at all times during engineering operations.
  • Identified facility deficiencies, incorporating repair actions into maintenance procedures schedule.
  • Maintained records of engineering activities including materials used, labor costs.
  • Reviewed blueprints and schematics for accuracy prior to implementation.
  • Evaluated current processes and developed actionable plans for improvement.
  • Identified potential risks associated with engineering projects and created mitigation plans.
  • Analyzed system functions, budgets and objectives in order to determine needed changes.
  • Developed and implemented comprehensive engineering plans to ensure successful project completion.
  • Created and maintained detailed technical drawings and documents for new products, processes, and systems.
  • Managed a team of engineers in the design, development, testing, installation and maintenance of complex mechanical systems.
  • Drafted reports summarizing project status updates for management review.
  • Researched new technologies to improve existing designs and create more efficient solutions.
  • Participated in cross-functional meetings to discuss issues related to engineering operations.
  • Maintained entire infrastructure and compliance documentation.
  • Improved cost-efficiency and output of diverse facility equipment through corrective maintenance, repair and calibration.
  • Assisted in development of corporate plans and managed infrastructure upgrades, equipment replacements and building modifications.
  • Troubleshot conflicting design and development requirements and special material requirements.
  • Assisted in troubleshooting problems encountered by staff during project execution.
  • Conducted cost analysis on projects to ensure profitability goals were met.
  • Established performance metrics for measuring progress against objectives.
  • Analyzed customer feedback data to develop strategies for product improvements.
  • Prepared estimates and budgets.
  • Generated technical reports for customers.
  • Calibrated scientific or technical equipment.
  • Utilized mathematical skills and understanding of engineering principles to design new products.
  • Formulated plans using detailed drawings.
  • Communicated with clients and coworkers about analysis results.
  • Performed testing to determine functionality or optimization.
  • Fulfilled orders by successfully planning, budgeting, and coordinating projects.
  • Conferred with technical personnel to prepare designs or operational plans.
  • Advised customers on use of products or services.
  • Avoided data loss by creating back-ups of programs.
  • Created accurate project specifications, documenting in technical manuals.
  • Designed materials for industrial or commercial applications.
  • Designed engineering experiments.
  • Developed and implemented plans for routine preventive maintenance.
  • Meticulously kept records of building rounds, engineering logs and data sheets.
  • Coordinated with vendors to acquire necessary parts for engineering projects.
  • Supervised engineering and maintenance staff and facilitated hiring, training and personal development.
  • Developed quality assurance procedures to ensure compliance with industry standards.
  • Finished projects on time and within budget.
  • Coordinated activities with suppliers, contractors or other departments.
  • Analyzed design or requirement information for equipment or systems.
  • Researched feasibility, design or performance of components or systems.
  • Conducted analyses addressing failure, reliability or yield improvement.
  • Completed regulatory documents concerning safety issues.
  • Generated engineering documentation and oversaw design projects.
  • Determined design criteria or specifications.

Senior Maintenance Technician

Holiday Inn Westport
St Louis
04.1987 - 05.1999
  • Assisted in the installation of new machinery by providing technical support during setup.
  • Identified root causes of mechanical failures to determine appropriate solutions.
  • Maintained records of all maintenance activities, including parts used and labor hours expended.
  • Performed preventative and corrective maintenance on production equipment.
  • Trained junior technicians in proper repair, troubleshooting, and safety procedures.
  • Installed new components into machines according to manufacturer's instructions.
  • Collaborated with engineering teams to develop improved machine designs and processes.
  • Troubleshot complex problems related to electrical, hydraulic, pneumatic, and other systems.
  • Identified areas where process improvements could reduce downtime or improve efficiency.
  • Conducted tests on newly installed machinery to verify performance levels meet specifications.
  • Ordered replacement parts as needed for repairing or improving existing equipment.
  • Provided technical advice regarding machine operations and malfunctions to operators.
  • Inspected machines regularly to ensure they were running properly and safely.
  • Developed and implemented preventive maintenance plans for all machinery in the facility.
  • Analyzed data from predictive maintenance systems to identify potential issues with equipment.
  • Participated in regular meetings with supervisors to discuss upcoming projects or maintenance concerns.
  • Evaluated current practices for maintaining a safe work environment throughout the facility.
  • Repaired broken components quickly using a variety of hand tools and specialized diagnostic equipment.
  • Ensured compliance with applicable safety regulations and industry standards.
  • Operated hand and power tools to complete repairs.
  • Cleared clogged drains and replaced valves, faucets, and fixtures.
  • Maintained clear and safe workspace areas to meet OSHA standards.
  • Installed new systems, replacement parts, and components to maintain proper operation.
  • Diagnosed problems with mechanical and electrical systems and equipment using advanced troubleshooting abilities.
  • Responded to personnel queries and troubleshooting requests to provide repair services to improve operations.
  • Inspected grounds and buildings to identify, minimize and correct hazardous property conditions or liability concerns.
  • Completed basic carpentry tasks and installed shelves, hooks, and closet rods to meet customer needs.
  • Read and interpreted equipment and work orders to properly perform required maintenance services.
  • Checked electrical components to identify defects and hazards and make necessary adjustments.
  • Changed HVAC filters and cleaned condensation drains to perform preventive maintenance on HVAC systems.
  • Disassembled appliances to diagnose problems and facilitate repairs.
  • Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.
  • Assembled, installed or repaired electrical or electronic components and pipe systems.
  • Adjusted devices or control instruments using hand tools, levels or straightedges.
  • Inspected, operated or tested machinery or equipment to diagnose machine malfunctions.
  • Set up and operated machine tools to repair or fabricate jigs, fixtures or tools.
  • Planned and laid out repair work using diagrams, drawings or schematic diagrams.
  • Aligned and balanced new equipment after installation.
  • Designed equipment to aid repair or maintenance of machines, mechanical equipment or building structures.
  • Estimated costs to repair machinery, equipment or building structures.
  • Documented detailed reports on the status of each piece of equipment following service or repairs.
  • Scheduled preventive maintenance programs to keep equipment in good working condition.
  • Collaborated with building managers to assess ongoing needs and plan preventive maintenance schedules.
  • Conducted performance and safety inspections on equipment and machinery to maintain operational baseline.
  • Implemented diagnostics to identify failures, determine parts and material requirements and facilitate repairs.
  • Repaired machines, equipment or structures using tools or equipment.
  • Replaced wall sockets, ran lines and completed basic carpentry to finish installations.
  • Routinely inspected equipment for preventive and emergency maintenance needs.
  • Implemented preventive maintenance practices and upheld equipment guidelines to avoid failures.
  • Ordered parts, supplies or equipment from catalogs or suppliers.
  • Dismantled machines, equipment, or devices to access and remove defective parts.
  • Maintained or repaired specialized equipment or machinery.
  • Performed routine maintenance by inspecting drives, motors or belts.
  • Cleaned or lubricated shafts, bearings or other parts of machinery.
  • Recorded type and cost of maintenance or repair work.
  • Diagnosed and corrected mechanical problems using blueprints, repair manuals or parts catalogs.

Line Technician

IBP
St Louis
10.1993 - 01.1995
  • Completed day-to-day duties accurately and efficiently.
  • Prioritized and organized tasks to efficiently accomplish service goals.
  • Identified needs of customers promptly and efficiently.
  • Assisted with customer requests and answered questions to improve satisfaction.
  • Collaborated closely with team members to achieve project objectives and meet deadlines.
  • Maintained updated knowledge through continuing education and advanced training.
  • Conducted routine maintenance and repairs on mechanical systems and industrial equipment.

Education

HVAC-R 1 - HVAC-R

Unitec
Bonne Terre, MO
03-1998

GED -

Glen Glaze Library
Twin Oaks, Mo
12-1986

Affiliations

  • Family
  • Cooking
  • Music
  • Movies
  • Fishing
  • Boating
  • Camping

Certification

  • 608 Universal
  • 609 Auto
  • Burner & Boiler Controls

References

References available upon request.

Timeline

HVAC-R Service Technician

All Climate Services
05.2005 - 04.2007

Building Engineer

P & P Restaurant's
07.2000 - 04.2005

Chief Engineer

Wyndham
05.1999 - 07.2000

Owner/Operator Technician

Ross Services
03.1998 - 02.2012

Line Technician

IBP
10.1993 - 01.1995

Senior Maintenance Technician

Holiday Inn Westport
04.1987 - 05.1999

HVAC-R 1 - HVAC-R

Unitec

GED -

Glen Glaze Library

Similar Profiles

CREATE PROFILE
WILLIAM ROSS