Summary
Overview
Work History
Education
Skills
Certification
Timeline
Manager

Xavier Febo

Hope Mills

Summary

Dynamic professional with extensive experience in team leadership, strategic planning, and operational management. Proven ability to leverage strong communication and organizational skills to ensure project success and drive team performance. Recognized for fostering collaborative work environments that enhance productivity and consistently achieve organizational goals. Committed to delivering results through innovative problem-solving and a focus on continuous improvement.

Overview

12
12
years of professional experience
1
1
Certification

Work History

Manager

PrimeEx/Hibiscus Processing
06.2016 - 08.2025
  • CBD distillation on largest scale (150 kg/hr flow rate)
  • Ethanol extraction on medium scale (100 gallon mixing tank)
  • Propane extraction small to medium scale (20lb batches)
  • Winterization - Perform tests to reveal fats, waxes, and impurities. Remove fats, waxes, and impurities from extract, distillate, and isolate using solvents, Buchner flask with funnel, and vacuum filters.
  • CBD isolation at ~ 80% conversion rate from small scale to large (5000ml beakers up to 25gal- 100gal reactors glass and stainless)
  • Operate solvent recovery machines - multiple 50L rotary evaporators and a SubZero Scientific Einstein 6100 falling film evaporator.
  • Operate and maintain 9 inch Pope Pro Pass 600 wiped film evaporator (20kg/hr flow rate) (1. Ensure the heater, chillers, gear pumps, heat tapes, vacuum pump, and wiper are all functioning properly. - 2. Ensure all product being produced is uncontaminated and at the correct potency.
  • Research and develop the most cost effective boiling points for potency and yield. (Isolate, oil, and extract)
  • Operate and maintain Shimadzu HPLC 2030C (1. Create mobile phases by mixing precisely measured out amounts of chemicals including HPLC grade Methanol, Water, Acetonitrile, and Phosphoric Acid. - 2. Perform accurate potency tests for 11 different cannabinoids and read and react to results.(Over 2,000 tests performed) - 3. Prep samples measuring in micrograms and diluting 50x without contamination. - 4. Maintain calibrated, clean, and properly functioning HPLC.)
  • Take samples at correct changing points to collect proper data from in house and 3rd party, label, and create form for laboratory.
  • Resolved issues quickly to maintain productivity goals.
  • Managed multiple projects concurrently, ensuring timely completion and meeting budget constraints.
  • Increased overall productivity by identifying bottlenecks in the production process and proposing effective solutions.
  • Fostered a culture of continuous improvement by encouraging open communication between team members and regularly soliciting feedback on operational procedures.
  • Reviewed maintenance and repair problems to determine appropriate action for resolution.
  • Created streamlined production schedules and collaborated with production employees to communicate objectives and goals.
  • Estimated labor requirements to support anticipated workload.
  • Determined suitable crew requirements, scheduled employees, and worked with human resources to meet changing production schedules.
  • Developed a comprehensive training program for new hires, resulting in higher employee retention rates and faster integration into the team.
  • Mentored junior staff members on best practices in production management, cultivating a skilled workforce capable of tackling complex challenges head on.
  • Utilized data analysis tools to identify and resolve production issues.
  • Oversaw routine maintenance programs and scheduled service to keep equipment functioning at peak levels.
  • Scrutinized production output and identified areas for improvement.
  • Introduced automation and technological advancements to the production floor, leading to increased efficiency and reduced labor costs.

Maintenance Welder

Metal Recycling Services
07.2015 - 06.2016
  • Mainly stick welding some flux-core
  • Propane torch cutting accurately
  • Repaired/Replaced industrial outdoor picking line belts
  • Maintain shredder such as - weld cracks or breaks; change caps and hammers as needed; Fabricate and weld custom pieces to benefit shredder
  • Fabricate, weld, or replace any broken or obstructed pieces around entire yard
  • Welded in flat, horizontal, vertical, and overhead positions.
  • Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
  • Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
  • Enhanced welding quality by following precise welding procedures and maintaining proper equipment settings.
  • Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
  • Optimized material usage by accurately measuring and cutting required components prior to welding.
  • Collaborated with team members for seamless project execution, improving overall productivity.
  • Salvaged and rebuilt parts to achieve cost savings and reduce waste.
  • Streamlined work processes through effective communication with supervisors and team members about project requirements and progress updates.
  • Maintained safety by wearing protective equipment, staying alert and following procedures.
  • Used problem-solving skills to alleviate issues efficiently with minimal supervision.
  • Followed work orders and specifications for machine and equipment replacement, repair, or maintenance.
  • Followed instructions from supervisor regarding daily job tasks and duties.
  • Repaired/Replaced industrial outdoor picking line belts
  • Helped clean the yard by driving skid steer or large wheel loader working in tandem
  • Lockout Tagout and harness trained
  • Perform multiple tasks operating boom lift (welding, torch cutting, greasing, maintenance, etc.)
  • Operate outdoor remote tower crane


Fabricator / Mechanic

DAFCO
07.2014 - 07.2015
  • Fabricate and Tig, Stick, and Mig welding on water sealed stainless steel structures; carbon steel mezzanines and pump/plumbing skids
  • Wired pumps, motors, floats, and system control devices w/ schematics
  • Mounted heavy pumps and motors
  • Forklift/Telehandler Forklift operator
  • Use a wide variety of power and non- power tools
  • Operated welding machines and grinders to cut, shape and join metal workpieces.
  • Followed Operational Safety and Health Administration (OSHA) regulations to promote safe equipment operation and workplace safety.
  • Ensured a safe working environment by adhering to safety protocols and maintaining properly functioning equipment.
  • Collaborated with team members to complete projects accurately and quickly.
  • Adjusted machine settings and tooling to get accurate cuts and shapes for each job.
  • Supported new team members, sharing knowledge and skills to improve overall team performance in metal fabrication.
  • Optimized workshop space utilization, organizing tools and materials for easy access during fabrication tasks.
  • Utilized blueprints, schematics and diagrams to accurately complete tasks.
  • Assembled parts correctly according to specifications, reducing quality issues.
  • Participated in projects requiring assembly of large and small components.
  • Operated hoists, cranes and other heavy machinery to transport materials and parts.
  • Inspected completed products to encourage quality and adherence to company standards.

Grinder

Hallman Foundry
01.2014 - 07.2014
  • Ground Industrial castings of different metals
  • Assembly line part inspector
  • Supported quality control efforts by performing routine inspections on finished products and adjusting work accordingly to adhere to strict tolerances.
  • Completed deburring, buffing and polishing materials according to strict tolerances.
  • Enhanced safety in the workplace by following established guidelines and procedures for grinder operation.
  • Upheld company standards for cleanliness in the workspace, contributing to an organized and efficient environment conducive to productivity.
  • Sharpened tools as needed to ensure optimal performance during grinding operations, extending tool life.
  • Set up and ran equipment to complete grinding tasks efficiently and within required timeframes.

Education

High school diploma -

South View High School
Hope Mills, NC

Skills

  • Stick welding
  • Blueprint reading
  • Manufacturing
  • Mechanical knowledge
  • Fabrication
  • MIG welding
  • Attention to detail
  • Power tools
  • Metal fabrication
  • Large machinery operation
  • HPLC operator
  • Hand tools
  • Tig welding (1year)
  • CGMP
  • Distillation
  • Team leadership
  • Time management
  • Decision-making
  • Verbal and written communication
  • Staff training and development
  • Staff management
  • Task delegation
  • Documentation and reporting
  • Staff development
  • Shift scheduling
  • Conflict resolution
  • Negotiation
  • Expectation setting
  • Safety procedures
  • Coaching and mentoring
  • Work prioritization
  • Recruiting and interviewing
  • Data analysis
  • Disciplinary techniques
  • Teamwork and collaboration
  • Positive attitude
  • Adaptability and flexibility
  • Multitasking Abilities

Certification

Driver's License

Timeline

Manager

PrimeEx/Hibiscus Processing
06.2016 - 08.2025

Maintenance Welder

Metal Recycling Services
07.2015 - 06.2016

Fabricator / Mechanic

DAFCO
07.2014 - 07.2015

Grinder

Hallman Foundry
01.2014 - 07.2014

High school diploma -

South View High School

Similar Profiles

CREATE PROFILE
Xavier Febo