Yael J Castellanos

• Replaced faulty switches, outlets, circuit breakers when necessary.
• Provided emergency services during outages or natural disasters.
• Connected wires to circuit breakers, transformers or other components to form circuits.
• Used hand tools such as drills, saws, wire strippers, and crimpers to complete tasks.
• Maintained records of work performed for future reference purposes.
• Planned new installations by studying drawings, technical manuals, and other documents.
• Inspected completed installations for conformance to codes and regulations.
• Worked with contractors regarding project timelines and budgets.
• Adhered to local building codes when installing new electrical systems.
• Instructed apprentices on proper installation techniques for various electrical components.
• Conducted tests on electrical components, circuits, and systems to ensure compliance with safety standards.
• Ensured all safety procedures were followed while working with live wires.
• Updated outdated wiring systems with newer technologies.
• Installed electrical systems in residential and commercial buildings according to plans and specifications.
• Resolved customer complaints through effective problem-solving techniques.
• Repaired broken power lines due to storms or accidents.
• Performed maintenance on existing electrical wiring and equipment.
• Assisted journeyman electricians in troubleshooting complex problems.
• Identified system malfunctions and performed repairs as needed.
• Tested continuity of circuits using testing devices such as ohmmeters, voltmeters, ammeters.
• Read blueprints or schematic diagrams to determine the layout of a particular job site.
• Troubleshot issues and developed effective solutions.
• Constructed and installed electrical wiring and electronic components and maintained equipment.
• Installed and maintained breaker panels for commercial and residential buildings.
• Replaced malfunctioning components for failing electrical setups.
• Performed rough-in, termination, and underground work.
• Reviewed existing electrical systems for maintenance, repair and update requirements.
• Corrected issues and installed new fixtures, wiring, circuits and motors.
• Installed conduit systems, various lighting systems, and basic control systems.
• Built controllers and panels to complete system installations.
• Installed motor feeders and made standard motor connections.
• Led team of apprentice electricians in installing electrical systems and inspecting existing circuits.
• Followed established safety practices when using tools and equipment.
• Kept work areas clean, neat and free of hazards.
• Completed semi-skilled and skilled work under supervision of fully qualified professionals.
• Traced and diagnosed electrical malfunctions using hand tools and test equipment.
• Dug trenches and created holes to pull conduit and install supports.
• Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
• Assisted with new installation and upgrades of plant equipment.
• Verified measurements and made accurate cuts to avoid wasting materials on job sites.
• Assembled and installed physical structures, electrical wiring, and electronic components.
• Reviewed diagrams and relevant codes to complete tasks safely and accurately.
• Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
• Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
• Performed troubleshooting and diagnosis on malfunctioning systems or components.
• Collaborated with architects on electrical systems design for new construction.
• Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
• Pulled insulated wires or cables through conduits to complete circuits.
• Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
• Planned layout and installation of wiring and fixtures based on project specifications and building codes.
• Addressed and resolved worksite safety hazards to reduce risk.
• Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
• Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
• Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
• Fabricated parts according to specifications using hand and power tools.
• Trained workers to install, maintain and repair electrical equipment and fixtures.
• Reviewed blueprints to determine electrical component and wiring locations.

• Replaced faulty switches, outlets, circuit breakers when necessary.
• Connected wires to circuit breakers, transformers or other components to form circuits.
• Provided emergency services during outages or natural disasters.

• Run Conduit

• Pull cable

• Run conduit Aluminum/Rigid 3/4'”-6”

• Benders and Hydraulic Benders

• Installment of breakers junction boxes brackets cable tray transformers etc.

• Temporary power stress cones splices

• Troubleshoot and Meg wires Bend, cut, and make tread on conduit

• Terminate receptacles, lights, panels

• Drive Ariel Libs, man libs, scissors libs and buggies Arrange wiring, fixtures, and conduit boxes in

preparation for installation

• Temporary Power for A/C units DP-30 4banks tools trailers Work inside MCC Instrumentation

• Maintained records of work performed for future reference purposes.
• Used hand tools such as drills, saws, wire strippers, and crimpers to complete tasks.
• Planned new installations by studying drawings, technical manuals, and other documents.
• Inspected completed installations for conformance to codes and regulations.
• Worked with contractors regarding project timelines and budgets.
• Adhered to local building codes when installing new electrical systems.
• Instructed apprentices on proper installation techniques for various electrical components.
• Conducted tests on electrical components, circuits, and systems to ensure compliance with safety standards.
• Ensured all safety procedures were followed while working with live wires.
• Updated outdated wiring systems with newer technologies.
• Installed electrical systems in residential and commercial buildings according to plans and specifications.
• Resolved customer complaints through effective problem-solving techniques.
• Repaired broken power lines due to storms or accidents.
• Performed maintenance on existing electrical wiring and equipment.
• Assisted journeyman electricians in troubleshooting complex problems.
• Identified system malfunctions and performed repairs as needed.
• Tested continuity of circuits using testing devices such as ohmmeters, voltmeters, ammeters.
• Read blueprints or schematic diagrams to determine the layout of a particular job site.
• Troubleshot issues and developed effective solutions.
• Constructed and installed electrical wiring and electronic components and maintained equipment.
• Installed and maintained breaker panels for commercial and residential buildings.
• Replaced malfunctioning components for failing electrical setups.
• Performed rough-in, termination, and underground work.

• Replaced faulty switches, outlets, circuit breakers when necessary.
• Connected wires to circuit breakers, transformers or other components to form circuits.
• Provided emergency services during outages or natural disasters.

• Replaced faulty switches, outlets, circuit breakers when necessary.
• Connected wires to circuit breakers, transformers or other components to form circuits.
• Provided emergency services during outages or natural disasters.

• Run Conduit

• Pull cable

• Run conduit Aluminum/Rigid 3/4'”-6”

• Benders and Hydraulic Benders

• Installment of breakers junction boxes brackets cable tray transformers etc.

• Temporary power stress cones splices

• Troubleshoot and Meg wires Bend, cut, and make tread on conduit

• Terminate receptacles, lights, panels

• Drive Ariel Libs, man libs, scissors libs and buggies Arrange wiring, fixtures, and conduit boxes in

preparation for installation

• Temporary Power for A/C units DP-30 4banks tools trailers Work inside MCC Instrumentation

• Replaced faulty switches, outlets, circuit breakers when necessary.
• Connected wires to circuit breakers, transformers or other components to form circuits.
• Provided emergency services during outages or natural disasters.

• Run Conduit

• Pull cable

• Run conduit Aluminum/Rigid 3/4'”-6”

• Benders and Hydraulic Benders

• Installment of breakers junction boxes brackets cable tray transformers etc.

• Temporary power stress cones splices

• Troubleshoot and Meg wires Bend, cut, and make tread on conduit

• Terminate receptacles, lights, panels

• Drive Ariel Libs, man libs, scissors libs and buggies Arrange wiring, fixtures, and conduit boxes in

preparation for installation

• Temporary Power for A/C units DP-30 4banks tools trailers Work inside MCC Instrumentation

• Replaced faulty switches, outlets, circuit breakers when necessary.
• Connected wires to circuit breakers, transformers or other components to form circuits.
• Provided emergency services during outages or natural disasters.

• Run Conduit

• Pull cable

• Run conduit Aluminum/Rigid 3/4'”-6”

• Benders and Hydraulic Benders

• Installment of breakers junction boxes brackets cable tray transformers etc.

• Temporary power stress cones splices

• Troubleshoot and Meg wires Bend, cut, and make tread on conduit

• Terminate receptacles, lights, panels

• Drive Ariel Libs, man libs, scissors libs and buggies Arrange wiring, fixtures, and conduit boxes in

preparation for installation

• Temporary Power for A/C units DP-30 4banks tools trailers Work inside MCC Instrumentation

• PLC Work
• Run Conduit
• Pull cable
• Run conduit Aluminum/Rigid 3/4'-6'
• Benders and Hydraulic Benders
• Installment of breakers junction boxes brackets cable tray transformers etc.
• Temporary power stress cones splices
• Troubleshoot and Meg wires Bend, cut, and make tread on conduit
• Terminate receptacles, lights, panels
• Drive Ariel Libs, man libs, scissors libs and buggies
• Arrange wiring, fixtures, and conduit boxes in preparation for installation
• Temporary Power for A/C units DP-30 4banks tools trailers
• Work inside MCC Instrumentation work bend cut and install tubing
• Tank Farms
• Motors
• Valves

• PLC work
• Run Conduit
• Pull cable
• Run conduit Aluminum/Rigid 3/4'-6'
• Benders and Hydraulic Benders
• Installment of breakers junction boxes brackets cable tray transformers etc.
• Temporary power stress cones splices
• Troubleshoot and Meg wires Bend, cut, and make tread on conduit
• Terminate receptacles, lights, panels
• Drive Ariel Libs, man libs, scissors libs and buggies
• Arrange wiring, fixtures, and conduit boxes in preparation for installations
• Temporary Power for A/C units DP-30 4banks tools trailers
• Work inside MCC Instrumentation work bend cut and install tubing
• Tank Farms
• Motors
• Valves

• PLC Work
• Run Conduit
• Pull cable
• Run conduit Aluminum/Rigid 3/4'-6'
• Benders and Hydraulic Benders
• Installment of breakers junction boxes brackets cable tray transformers etc.
• Temporary power stress cones splices
• Troubleshoot and Meg wires Bend, cut, and make tread on conduit
• Terminate receptacles, lights, panels
• Drive Ariel Libs, man libs, scissors libs and buggies
• Arrange wiring, fixtures, and conduit boxes in preparation for installations
• Temporary Power for A/C units DP-30 4banks tools trailers
• Work inside MCC Instrumentation work bend cut and install tubing
• Tank Farms
• Motors
• Valves

• Plc work
• Run Conduit
• Pull cable
• Run conduit Aluminum/Rigid 3/4'-6'
• Benders and Hydraulic Benders
• Installment of breakers junction boxes brackets cable tray transformers etc.
• Temporary power stress cones splices
• Troubleshoot and Meg wires Bend, cut, and make tread on conduit
• Terminate receptacles, lights, panels
• Drive Ariel Libs, man libs, scissors libs and buggies
• Arrange wiring, fixtures, and conduit boxes in preparation for installation
• Temporary Power for A/C units DP-30 4banks tools trailers
• Work inside MCC Instrumentation work bend cut and install tubing
• Tank Farms
• Motors
• Valves

• Plc work
• Run Conduit
• Pull cable
• Run conduit Aluminum/Rigid 3/4'-6'
• Benders and Hydraulic Benders
• Installment of breakers junction boxes brackets cable tray transformers etc.
• Temporary power stress cones splices
• Troubleshoot and Meg wires Bend, cut, and make tread on conduit
• Terminate receptacles, lights, panels
• Drive Ariel Libs, man libs, scissors libs and buggies
• Arrange wiring, fixtures, and conduit boxes in preparation for installations
• Temporary Power for A/C units DP-30 4banks tools trailers
• Work inside MCC Instrumentation work bend cut and install tubing
• Tank Farms
• Motors
• Valves

• Run Conduit
• Terminators Pull cable
• Run conduit Aluminum/Rigid 3/4'-6'
• Benders and Hydraulic Benders
• Installment of breakers junction boxes brackets cable tray transformers etc.
• Temporary power stress cones splices
• Troubleshoot and Meg wires Bend, cut, and make tread on conduit
• Terminate receptacles, lights, panels
• Drive Ariel Libs, man libs, scissors libs and buggies
• Arrange wiring, fixtures, and conduit boxes in preparation for installation
• Temporary Power for A/C units DP-30 4banks tools trailers
• Work inside MCC Instrumentation work bend cut and install tubing
• Tank Farms
• Motors
• Valves

• PLC Work
• Run conduit
• Pull Wire
• Terminators Pull cable
• Run conduit Aluminum/Rigid 3/4'-6'
• Benders and Hydraulic Benders
• Installment of breakers junction boxes brackets cable tray transformers etc.
• Temporary power stress cones splices
• Troubleshoot and Meg wires Bend, cut, and make tread on conduit
• Terminate receptacles, lights, panels
• Drive Ariel Libs, man libs, scissors libs and buggies
• Arrange wiring, fixtures, and conduit boxes in preparation for installation
• Temporary Power for A/C units DP-30 4banks tools trailers
• Work inside MCC Instrumentation work bend cut and install tubing
• Tank Farms- Refinery
• Motors
• Valves

• PLC Work
• Run conduit
• Pull Wire
• Terminators Pull cable
• Run conduit Aluminum/Rigid 3/4'-6'
• Benders and Hydraulic Benders
• Installment of breakers junction boxes brackets cable tray transformers etc.
• Temporary power stress cones splices
• Troubleshoot and Meg wires Bend, cut, and make tread on conduit
• Terminate receptacles, lights, panels
• Drive Ariel Libs, man libs, scissors libs and buggies
• Arrange wiring, fixtures, and conduit boxes in preparation for installation
• Temporary Power for A/C units DP-30 4banks tools trailers
• Work inside MCC Instrumentation work bend cut and install tubing
• Tank Farms- Refinery
• Motors
• Valves

• Pull cable Run conduit Aluminum/Rigid 3/4'-6'
• Benders and Hydraulic Benders
• Installment of breakers junction boxes brackets cable tray transformers etc.
• Temporary power stress cones splices
• Troubleshoot and Meg wires Bend, cut, and make tread on conduit
• Terminate receptacles, lights, panels
• Drive Ariel Libs, man libs, scissors libs, and buggies
• Arrange wiring, fixtures

• Pull cable Wire basket Terminate receptacles
• Temporary Power for A/C units DP-30 4banks tools trailers
• Work inside MCC Instrumentation work bend cut and install tubing

• Pull cable Wire basket Terminate receptacles
• Pull cable Run conduit Bend, cut, and make tread on conduit
• Terminate receptacles, panels, lights
• Drive Ariel Libs, man libs, scissors libs and buggies
• Arrange wiring, fixtures, and conduit boxes in preparation for installation
• Terminate motors Temporary power for A/C units dp-30s 4banks transformers